Tender For Proposed Partition Including Amenities, Ac & Furnitures At Fourth Floor Of Zonal-V Office Building For Tambaram Corporation
Tender Value
38.50 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
16 days left
EMD
38500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Partition Including Amenities, Ac & Furnitures At Fourth Floor Of Zonal-V Office Building For Tambaram Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, fabricating, erecting and fixing Calcium Silicate Board False Ceiling upto a ceiling height of 4.5m from floor level (M-0618 SOR 25-26 Pg No:97) |
| 2 | Supply and installation of Acoustical False Ceiling of Higher absorption nubby finish tiles, square edge, glass fibre core fully encapsulated ceiling tile of size 595 x 595 x 15mm having volume density 120 Kgs / m3, weight 1.8 / 2.4 / 3 kg / m2 which is suspended by using 0.3mm thick T15 metal grid system. T15 metal grid system of 600 x 600mm module includes WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleevesand suitable fasteners at 300mm centers. Then suspend the MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally, the CT15W06 CrossT with flange width 15mm, height26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. The Higher absorption Nubby finish tiles square edge of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by thedepartment officers. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc. complying to standard specication. (M-0622) |
| 3 | Supply and installation of Acoustical Fibre Based Wall Panelling of strand colour, kerfed edge magnesite bonded pine wood fibre core tiles of size 600 x 2400 x 20mm, density 400 kgs / m3, weight 8 kg / m2 installed by using GI strut frame work system with non-visible fasteners usin PVC strut H-Spline. The GI strut frame work systems includes GI strut CC 50 cross channel having thickness 0.7mm, length 3600mm, knurled web 50, depth 50mm and equal flanges 15mm is fastened to wall positioned horizontally in a regular manner at 600mm centre to centre. PVC strut H-Spline having sectional thickness 2mm and length 2400mm to be fixed perpendicular to the Strut CC50 cross channel at 600mm centers. The kerfed edge panels shall be then inserted into the strut H-Spline along their long edges of 2400mm against frame work to perfect fit with staggered short edges. The system is backlined with the acoustical infill Synthetic Polyfiber 500 gsm 50mm thick. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by the department officers. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc., complying to standard specication. |
| 4 | Supplying and Fixing of 75mm thk. PLYWOOD PARTITION WITH LAMINATE FINISHED, Providing and fixing ply wood Partition till bottom of roof/Beam using 12mm thk commercial ply wood partition finished with 1mm thk. laminate (Merino or equivalent make) on both side, with 50 x 50mm Aluminium box section as suppots at 600 x 600mm c/c as per detail drawing. All ply woods (Century/Greenply or equivalent make) used for construction should be coated with anti termite coating.Cost of the partition to include for glass wool Insulation 48Kg/m2 density infill for the complete area of the partition. Installation of the glass wool shall be protected with Tissue covering taped to the frame or plastic sheet taped to the frame on one side. Cost of the partition shall be inclusive of necessary cut-outs for electrical / data and other service outlets. Cost to include applying fire and acoustical sealants at periphery of partitions & cut outs of services from both sides as per manufactures specifications. |
| 5 | Supply and fixing of 19W LED Round Recessed type fitting on false Ceiling with PVC unsheathed copper leads from terminals to the fitting. |
| 6 | Supply and fixing of 24W 2x2 LED square Recessed type fitting with LED (Higher End)on false Ceiling suitable hanging support from Ceiling with PVC unsheathed copper leads from terminals to the fitting. SD - 448 |
| 7 | Supply and installation of 2.00 TR 4 Way Cassette Inverter M-2665 |
| 8 | Supply and installation of 5KVA with double booster voltage stablizer with time delay relay M-2663 |
| 9 | Supply and fixing of MS stand Outdoor unit |
| 10 | Workstation Area - Linear Workstation - Sharing Size : 1200x 600 x750Ht Table Top is made up of 25mm thick PLPB Table Top with 2mm PVC Edge Banding . Understructure : MS Powdercoated Legs 40 x 40 Slant legs.Wire Management : Grommet Hole -65mmDia250mm ( Ht ) Raceway below the table top Main Screen : 18mm Thick & 300mm(ht) fabric magnetic privacy with rubber beading.CENTER T LEG : MS 40X40 MS 40X40 Square leg with CRCA Pipe of 1.6mm thickness of 60 microns Powder coated leg for Table top Stability.Passage side modesty : MS powder coted 450mm(ht) |
| 11 | WORKSTATION CHAIRS. AURA - Medium Back •Sturdy 50mm G.F Nylon dual- wheel Castors , •Glass Filled Nylon Base ,•Class 4 Gas lift as per DIN Standards 4550: 2004-12 , •Single Position Locking Synchro Mechanism , •Height Adjustable 2D PU Armrest, •Glass Filled Nylon Backrest with Mesh , •Seat Upholstered with PU Foam & Fabric , • Height Adjustable Lumbar Support. |
| 12 | Visitor Model Meshback Chair S type Fixed Handle |
| 13 | Main & Side table Specifications: Top panel: 25mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping LEG : Slant or Straight leg 40*40mm size tube, tube thickness 1.6mm with powder coating finised. SUPPORT BEAMS : 40*40mm ms tube with 1.6mm thickness and with ms powder cioating finished. MODESTY : 1.2mm Thk ms modesty panel with powder coating finished in 400mm height. Flip cover 400mm PLB SIDE & BACK STORAGE UNIT Specifications: Top & Sides: 18mm Thk pre laminated particle board Back: 6mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping FASCIA: 18mm Thk pre laminated particle board Handle: I shape handle Lock: Key lock |
| 14 | Main Chair Imported Half Leather Chair Fixed handle,Synchro Tilting Mechanism,Imported Gaslift,Chrome base,Heavy |
| 15 | BOARD ROOM CHAIRSWEBSTAR - Medium Back with Adjustable Handle & softpad with Chrome Base,Heavy Wheel, Synchro Tilting Mechanism,Molded Foam & Fabric |
| 16 | Supplying of 3 Seater sofa with tea table |
| 17 | Supply and installation of Counter for Pantry and Cafeteria, The storage of countertop to be made of 19mm BWR ply with necessary. The storages to be with shelves, made of 19mm thick BWR ply with swing shutters with all necessary accessories like concealed auto closing SS hinges, |
| 18 | TABLE TOP :25mm Thick Pre Laminated particle Board with 2mm PVC edge banding on all side with Flip Cover Hole Provision. (400mm Flip Cover). LEG : Slant type Legs, Tube thickness 1.6mm with ms powder coating finish. Cable entry Box Provided. Supported Cross Bar 40*30mm Size tube with 1.5mm thick sheet and powder coating finish. Below Table top Box Type Raceway. |
| 19 | PLB STORAGE UNIT Specifications: Top & Sides: 18mm Thk pre laminated particle board Back: 6mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping FASCIA: 18mm Thk pre laminated particle board Handle: I shape handle Lock: Key lock |
| 20 | Supply and fixing of Tambaram TCMC & Tamilnadu Logo - 1.5 ft logo including cost of material, labour, lead, lift etc., ` Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender