Tender For Madurai Corporation Zone - 5 Palaganatham 35Hp, Muniyandi Puram 5Hp Submersible Motor Repairing Work
Tender Value
3.08 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
6 days left
EMD
3083
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Madurai Corporation Zone - 5 Palaganatham 35Hp, Muniyandi Puram 5Hp Submersible Motor Repairing Work
BOQ
| Sl. No. | Item Description |
| 1 | Palaganatham Drainage Pumping Station 35 Hp Submersible Motor in Well . Lifting 35Hp Submersible Using ChainBlock then Dismandling of Motor Pump and motor Rotor , Stator and oil Chamber, |
| 2 | 35 HP Motor Stator Coil Complete Burnout.Removing Complete Startor coil.then New Enamel Dual Coat Copper Wire Stator Rewinding , “F” ClassInsulation Core Slate using Nomax Paper , “F” Class Insulation Wire Slaves,, “F” Class Insulation Core Stike, “F” Class Insulation Fiber Tabe ,Insulation Varnish,,Water Proof Insulation Red Varnish .Motor Fibre Class Lead Wire, Replacement and 6 Nos Copper Lugs Supply and Gripping. |
| 3 | Supply of Motor Top Side Carbon Segment Vs SS Mechanical oil Seal (Top) |
| 4 | Supply of Motor Bottom Side Diapharm Siliicon oil seal 1 no |
| 5 | Motor Top Side Rubber Sealed Ball Bearing 1 nos,and Bottum Double row Ball Bearing 1 no Over all 2 Nos Supply,High TempPetrolium Bearing Grease Supply |
| 6 | Replacement Pump Side Oil Chamber 100/120 Grade oil 25 lts |
| 7 | Replacement of Motor Teriminal Block |
| 8 | Replacement of Motor and Pump Side “O” Rings |
| 9 | Motor and Pump Profile Gasket |
| 10 | Dynamic Balancing of Pump Shaft Impeller Should be Welding By S.S Material and Machining to the Lathe Works |
| 11 | Replacement of panel OLR |
| 12 | Replacement 125 Amps Front Handle TPN Switch with fuse link |
| 13 | Replacement of 125 Amps MCCB |
| 14 | Recondition of Motor Cable Entry Glande and grimming Suitable lugs. |
| 15 | Supply And Fixing.Assembling Of Motor Stator Coil Core Fixing the Motor Body Cell,Pump ImpellerRotor ,Oil Chamber Body Fixing Pump Body Bottum Cell. And Top Cover CableBody Fixing Motor and Pump assembling,New Alanscrows and Spring Washer ,Painting and Erection in Well Loading &Unloading Charge Using Chainblock and Testing |
| 16 | MuniyandiPuram g 5Hp Muniyandipuram Drainage Pumping 5 Hp Submersible Motor in Well . Lifting 5Hp Submersible Using ChainBlock then Dismandling of Motor Pump and motor Rotor , Stator and oil Chamber, |
| 17 | 4 HP Motor Stator Coil Complete Burnout.Removing Complete Startor coil.then New Enamel Dual Coat Copper Wire Stator Rewinding , “F” ClassInsulation Core Slate using Nomax Paper , “F” Class Insulation Wire Slaves,, “F” Class Insulation Core Stike, “F” Class Insulation Fiber Tabe ,Insulation Varnish,,Water Proof Insulation Red Varnish .Motor Fibre Class Lead Wire, Replacement and 6 Nos Copper Lugs Supply and Gripping. |
| 18 | Supply of Motor Top Side Carbon Segment Vs SS Mechanical oil Seal (Top) |
| 19 | Supply of Motor Bottom Side Diapharm Siliicon oil seal |
| 20 | Motor Top Side Rubber Sealed Ball Bearing 1 nos,and Bottum Double row Ball Bearing 1 no Over all 2 Nos Supply, High TempPetrolium Bearing Grease Supply |
| 21 | Replacement Pump Side Oil Chamber 100/120 Grade oil |
| 22 | Replacement of Motor Teriminal Block |
| 23 | Replacement of Motor and Pump Side “O” Rings |
| 24 | Motor and Pump Profile Gasket |
| 25 | Dynamic Balancing of Pump Shaft Impeller Should be Welding By S.S Material and Machining to Lathe |
| 26 | Replacement Motor SS Shaft with Safety rings |
| 27 | Recondition of Motor Cable Entry Glande and grimming Suitable lugs. |
| 28 | Supply And Fixing.Assembling Of Motor Stator Coil Core Fixing the Motor BodyCell,PumpImpellerRotor ,Oil Chamber Body Fixing Pump Body Bottum Cell. And Top Cover CableBody Fixing Motor and Pump assembling,New Alanscrows and Spring Washer ,Painting and Erection in Well Loading &Unloading Charge Using Chainblock and Testing |
| 29 | Old Material Less Cost (-) |
| 30 | Add GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender