Tender For special Repair To Bldg No T-01, T-07, T-25 And T-64 In The Aor Of Age B/R-1 Under Ge Khumbathang
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jul 2026
19 days left
EMD
89500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No T-01, T-07, T-25 And T-64 In The Aor Of Age B/R-1 Under Ge Khumbathang
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/ lankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge. |
| 2 | M& L for 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engr-in-Charge |
| 3 | M& L for 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engr-in-Charge |
| 4 | Dismantling of timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed by Engr-in-Charge |
| 5 | M & L fo 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area exc 13 sqcm not exc25 sqcm , clean sawn, secured with nails or brads complete all as specified and directed by Engr-in-Charge |
| 6 | M & L fo 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area exc 3 sqcm not exc 6 sqcm , clean sawn, secured with nails or brads complete all as specified and directed by Engr-in-Charge |
| 7 | M & L fo 2nd class hard wood timber scantling plain fillets. square, rectangular or triangular in section area not exc 3 sqcm , clean sawn, secured with nails or brads complete all as specified and directed by Engr-in-Charge |
| 8 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge |
| 9 | S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel heet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 10 | S& F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/including rain guard cladding to wall,fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 11 | Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced complete all as specified and directed by Engr-in-Charge |
| 12 | M&L for Providing, cement concrete type Bo-1:2;4 in coping/ roof kerbs of mud stops, rounded or chamfered on edgescomplete all as specified and directed by Engr-in-Charge |
| 13 | M&L 75mm thick cement concrete type D-2, 1:4:8 for sub base complete all as specified and directed by Engr-in-Charge |
| 14 | M & L for Chequered cement concrete tiles 300cm300cmx20 mm thick, set,jointed and pointed in neat cement slurry in floors.with grey cement and pigment over and incl 15 mm screed in 1:6 complete all as specified and directed by Engr-in-Charge |
| 15 | M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid 15 mm thick in cm 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finishcomplete all as specified and directed by Engr-in-Charge |
| 16 | M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 17 | Taking down of unserviceable steel windows with frame (without taking down shutters and grill from frame) of size not exc 1.50 sqm each including cutting holes of appropriate size for insertion blocks of cement concrete hold fasts complete all as specified and directed by Engr-in-Charge |
| 18 | S&F factory made box type steel window with pintle hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-Charge and shown on Grawing No CEJZ/TD-06/07 & CEJZ/TD-07/07 |
| 19 | S&F factory made box type steel window with pintle hinges & 2 Nos 150 mm mild steel tower bolts to each shutte, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-Charge and shown on Grawing No CEJZ/TD-06/07 & CEJZ/TD-07/07 |
| 20 | Taking down shutters of any description exc. 1sqm but n. exc. 2sqm. complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F 35mm thick (factory made) plain framed panelled door shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply ,the size of rail and style as per IS : 1003 Part-I, Kiln seasoned and chemically pressure treatedfactory made shutters wood is to be incorporated complete all as specified and directed by Engr-in-Charge |
| 22 | M&L for 3.00 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n. exc. 0.50 sqm in each pane complete all as specified and directed by Engr-in-Charge |
| 23 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge |
| 24 | Supply & fixed in repairs stainless steel curtain rod 25mm bore powder coated with fixing side brackets, end cups, and fixed with PVC rawl plugs & steel screws complete all as specified and directed by Engr-in-Charge |
| 25 | M & L Preparation of New steel surfaces of any description and in any position over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide primer.complete all as specified and directed by Engr-in-Charge |
| 26 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. complete all as specified and directed by Engr-in-Charge |
| 27 | M&L for rolled mild steel in joist channel,angle or tee section, fixed independently, without connecting plates etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) as in desert cooler stands and all other similar works conforming to Fe -290 (Gde- E-165)complete all as specified and directed by Engr-in-Charge |
| 28 | S&F 150 mm size extruded aluminium door handles fabricated type complete all as specified and directed by Engr-in-Charge |
| 29 | S&F Aluminum anodized barrel tower bolt of extruded section 200mm long complete all as specified and directed by Engr-in-Charge |
| 30 | S & F Mild steel sliding door bolts,plate type,stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed.(250mm length of bolt) complete all as specified and directed by Engr-in-Charge |
| 31 | M&L for Joist, channel, angle, or tee sections,Fe-410-W (Gde E-250) quality A fixed independently, with or without connecting plates in Roof,Wall etc. complete all as specified and directed by Engr-in-Charge |
| 32 | S&F 2nd class Soft Wood fillets Square rectangular/triangular in section clean sawn secured with nails sec area exc 06 Sqcm & n.exc 13 Sqcm including dismantling timber fillets, rails, posts rafter purlins under 40 Sqcm in sectional area complete all as specified and directed by Engr-in-Charge |
| 33 | M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws for cupboard or other similar purposes complete all as specified and directed by Engr-in- charge. |
| 34 | M & L for 0.80 mm thick PVC edge binding tape around the 18 to 20 mm thick PVC shutter edge colour , complete all as specified and directed by Engr-in-Charge |
| 35 | S&F 150 mm long fancy type stainless steel handels for shutters complete all as specified and directed by Engr-in-Charge |
| 36 | S & F continuous (piano) hinges, mild steel, bright finish width of flaps equal to shutter thickness complete all as specified and directed by Engr-in-Charge |
| 37 | S & F 100mm size hasp and staple,stainless steel safety type, fixed with screws complete all as specified and directed by Engr-in-Charge |
| 38 | S & F high quality Magnet ball catcher for cupboard shutter,complete all as specified and directed by Engr-in-Charge |
| 39 | S & F soft close concealed Auto hinges for cabinet case complete all as specified and directed by Engineer-in-charge. |
| 40 | S & F heavy duty 20'' long telescopic slider to facilitate drawer slide of steel ball bearing fixed with steel screws complete all as specified and directed by Engineer-in-charge. |
| 41 | Dismantling floor, hearth or wall tiling incl cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified by Engr in charge |
| 42 | M & L for 25 mm thick cement concrete Type B-0 1:2:4 (12.5mm graded crushed stone aggregate) as in PCC padding to floor complete all as specified and directed by Engr-in-Charge |
| 43 | S & F Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in Dark or coloured cement to match complete all as specified and directed by Engr-in-Charge |
| 44 | M&L for non skid ceramic tiles 7 to 8 mm thick area of each tiles exc 0.11 sqm but n.exc 0.18 sqm (coloured tiles) in floor, set & jointed in neat cement slurry, pointed,in white or coloured cement to match, over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge |
| 45 | M&L for glazed ceramic tiles coloured (350 x 250 x 7/450x350/300x450x7 to 8mm thick) on walls,incl highlighter tiles as if reqd set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick on fair faces with CM (1:4) complete all as specified and directed by Engr-in-Charge |
| 46 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge |
| 47 | M&L for Joist, channel, angle, or tee sections,Fe-410-W (GdeE-250) quality fixed independently framed, with or without connecting plates,in roof,wall etc complete all as specified and directed by Engr-in-Charge |
| 48 | S&F in repair 3-layer PP-R Polypropylene random copolymer) concealed pipes 25mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed by Engr-in-Charge |
| 49 | S&F in repair 3-layer PP-R Polypropylene random copolymer) concealed pipes 20mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed by Engr-in-Charge |
| 50 | S&F in repair fancy type long body Bib taps for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed by Engr-in-Charge |
| 51 | S&F in repair fancy type angular Stop cock/angle cock 15mm bore pipe ,CP cast copper alloy complete all as specified and directed by Engr-in-Charge |
| 52 | M&L for .Pre-cast cement concrete block masonary type C-1 1:3:6 (using 16mm graded stone aggregate) with solid blocks exc. 10 cm in width and setting in cement mortar 1:6 , complete all as specified and directed by Engr-in-Charge |
| 53 | M&L for taking down plaster from block masonary or concrete masonary surfaces complete all as specified and directed by Engr-in-Charge |
| 54 | M & L for rendering 15mm thk CM 1:4 on fair faces of brick work or concrete surfaces Finish even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 55 | M & L rendering 15mm thk CM 1:6 on fair faces of brick work or concrete surfaces Finish even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge |
| 56 | Taking down chowkats or frame with shutters ( without taking off shutter from frame ) n exc 1.50Sqm each. complete all as specified and directed by Engr-in-Charge |
| 57 | Taking down chowkats or frame with shutters ( without taking off shutter from frame ) 1.50Sqm and n exc 4.0 Sqm each complete all as specified and directed by Engr-in-Charge |
| 58 | Taking down shutters from frames and refixing in same or other opening after easing and adjusting and repairing of any size complete all as specified and directed by Engr-in-Charge |
| 59 | S&F for powder coated( min. thickness of power coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge |
| 60 | S&F aluminium powder coated ( min. thickness of power coating 50 micron) Door/window and ventilator shutters and door , fixed or openable type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engr-in-charge. |
| 61 | S&F 5 mm thick, sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane. complete all as specified and directed by Engr-in-Charge |
| 62 | S&F 5 mm thick, sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane. complete all as specified and directed by Engr-in-Charge |
| 63 | M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified & directed by the Engr-in-Charge. |
| 64 | M&L preparing new steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of primer complete all as specified & directed by the Engr-in-Charge. |
| 65 | S&F in repair 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 fixed with L or J type hooks or screws as required including painting the steel surface with one coat of synthetic enamel paint over a coat of primerand taking down existing sheets in peices complete all as specified and directed by Engr-in-Charge |
| 66 | S&F in repair 75 mm bore PVC(SWR) pipes ISI marked in any length with or without ears laid in floor or walls complete all as specified and directed by Engr-in-Charge |
| 67 | S&F in repair 75mm PVC floor trap with or without hole incl jointing to waste pipe fixed in cement mortar 1:2:4 type B1 with CP Grating complete all as specified and directed by Engr-in-Charge |
| 68 | M&L machine cut kota stone slab flooring 18-20mm thick over 20mm cement creed base CM1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as specified and directed by Engr-in-Charge |
| 69 | S&F second class har wood plain solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered, put toghter with glue, pinned at joints including making good distrubed surfaces of wall complete all as specified and directed by Engr-in-Charge |
| 70 | S&F factory made double rebate box type side hung steel window with pintal hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle with & without glazing barx, one side wiremesh shutter without glazing bar & other side glass shutter with glazing bar including 8 mm mild steel gurad bars @ 100 m c/c devetailed or welded with one shop coat of zinc chromate primer complete allas specified a and shown on draing No CEJZ/TD-06/07 & CEJZ/TD-07/07 Note : Wiremesh and glass will be measured seperately. complete all as specified and directed by Engr-in-Charge |
| 71 | S&F 3mm thick,plain sheet glass orginary quality and glazing with old putty or with wooden beds (supplied alongwith shutters) in squares n.exc 0.50 sqm complete all as specified and directed by Engr-in-Charge |
| 72 | S&F Galvanised mild steel wire cloth 0.48mm nominal dia of wire and average width of aparture not more than 1 :8 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed by Engr-in-Charge |
| 73 | S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture not more than 1:18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed by Engr-in-Charge |
| 74 | Roof truss (framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (Beam tee, angle , hollow section, channel, pipes or flat section) including distance pieces, cleats etc FE 410-W (Grade E-250) quality B complete all as specified and directed by Engr-in-Charge |
| 75 | M&L preparation of new wooden or wood based surfaces of any decription over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge |
| 76 | S&F 150mm long alluminium, anodiserd barrel tower bolts of exturded section all as specified and directed by the Engr -in-charge |
| 77 | S&F 100mm extruded aluminium alloy handle all as specified and as directed by Engr-in-Charge. |
| 78 | S&F aluminum alloy, anodised , sliding door bult 250mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge |
| 79 | Demolation of PCC as in block walling built in cement mortar complete all as specified and directed by Engr-in-Charge |
| 80 | M&L for 15mm thick rendering in cement morter 1:4 or any face of brick walls or concrete surfaces finished even and fair (withour using extra cement) including preparatio of new plastered surfaces and applying two coats of cement base paint over a coat of chalk white primer complete all as specified and directed by Engr-in-Charge |
| 81 | M&L for 60mm thick machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006, M-35 Grade with grey cement and with pigment used, execluding paying of sand cushioning complete all as specified and directed by Engr-in-Chargeand directed Note: Sand will be measured and paid seperately |
| 82 | M&L for sand filling under floors or in foundation including watering and conslidation complete all as specified and directed by Engr-in-Charge |
| 83 | S&F of 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws/ self tapping screw J hook as per site requirement and washer, in roofs, wall etc with grade of zinc coating 275 incl taking down/ dismantling plain or corrugated steel sheeting any gauge thickness including naintal or similar pattern roof covering complete all as specified and directed by Engr-in-Charge |
| 84 | S&F in repair 16mm outer dia , 3 layer PPR polypropylene random copolymer) pipe SDR 7.4 & SDR 11UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fitting fixed complete to walls m ceiling or in floors etc complete all as specified and directed by Engr-in-Charge |
| 85 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thic AC building board or commercial plywood and fixed to wooden pluges with chromium plated barass screws and cup washers with alround aluminium beading as fixed in repairs and all as specified by Engr-in-Charge |
| 86 | Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface etc. complete all as specified and directed by Engr-in-Charge |
| 87 | Material and labour for point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earthing and connected to common earthing with PVC heavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etc for the following : - |
| 88 | One light point/ one fan point/ Bell Point controlled by one switch |
| 89 | One 3 pin socket outlet, 5 Amp independent |
| 90 | S&F switch piano flush type single pole one way 5 Amps all as specified |
| 91 | S&F switch socket combination multi purpose, 5 amp all as specified |
| 92 | S & F Ceiling rose 3 plates flush type 6 Amps,250 volts AC ISI marked |
| 93 | All as per item No 87 above but for point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy duty ISI marked /heavy duty conduit ISI marked as required at site alongwith accessories with 2.5 Sq mm FRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth all as specified. complete all as specified and directed by Engr-in-Charge |
| 94 | S & F switch socket combination switch socket outlet 3 pin, 16 Amp flush type complete all as specified and directed by Engr-in-Charge |
| 95 | S&F wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy efficient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose. complete all as specified and directed by Engr-in-Charge |
| 96 | S&F warm white/ white LED luminaire 600X600 mm,35/36 watt,220V recessed type lumen output >= 122 lumen per watts , THD < 10% environmental friendly , new generation , aesthetically designed , ultra modern with high brightness SMD LEDs as light source incl inbuilt drivers with high efficiency PMMA diffuser soft glare free light complete suitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size complete all as specified and directed by Engr-in-Charge |
| 97 | S&F LED security light fitting 35 watts 230 volts AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge |
| 98 | Supply and fix Bed Side Light LED 3 Watt complete all as specified and directed. Make : Philips/ CG/ Havells complete all as specified and directed by Engr-in-Charge |
| 99 | Supply and fix sheet metal enclosure SPN DB 12 way,single phase 240 volts double door with 200 Amp rated bus barcomplete all as specified and directed by Engr-in-Charge |
| 100 | Supply and fix miniature Circuit breaker (MCB) single pole (SP) current carrying capacity 5 to 32 Amp 240 volt 'C' curve 10 KA in the MCB DB with connection testing and commissioning complete all as specified and directed by Engr-in-Charge |
| 101 | Supply and fix for miniature Circuit breaker (MCB) single pole & neutral (SPN) 240 volt C curve 10 KA 32 Amps capacity IP 20 in the MCB DB with connection testing and commissioning complete all as specified and directed by Engr-in-Charge. |
| 102 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole etc in hard/dense soil complete all as specified and directed by Engr-in-Charge |
| 103 | Returning, filling in, including spreading, leveling watering, and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed by Engr-in-Charge |
| 104 | Removing excavated material n.exc 50m and depositing where directed at a level exc. 1.5 cm above the starting point complete all as specified and directed by Engr-in-Charge |
| 105 | Supplying and laying double walled corrugated HDPE Pipes of size 40 mm dia as per IS 16205 Anti termite, Anti Rodency and Non flame propagation propety etc for protection of LT cables complete all as specified and directed by Engr-in-Charge |
| 106 | Supply laying and testing cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables heavy duty 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core complete all as specified and directed by Engr-in-Charge |
| 107 | Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled around with 15 cm thick alternate layers of charcoal dust and salt and connected to earth lead wire 4mm dia (8 SWG) by means of bolt, nut and check nuts and washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm bore and watering pipe 20mm dia light grade with funnel and wire mesh, pcc 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15cm center to center both ways all as directed by Engr-In-Charge, complete all as shown in electric plate No 3 of MES SSR Part I |
| 108 | S & F holder any type for batten fitting all as specified complete all as specified and directed by Engr-in-Charge |
| 109 | Supply and fix in repair sheet metal enclosure SPN DB 08 way,single phase 240 volts double door with 200 amp rated bus bar complete all as specified and directed by Engr-in-Charge |
| 110 | S&F in repair two single core 6.0 sq mm for sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping with fixing accessories including one run of 6.0 Sq mm copper conductor. (Note - Two runs of 6.0 Sq mm cable, one run of 6.0 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.) complete all as specified and directed by Engr-in-Charge |
| 111 | Supply and fix in repair sheet metal enclosure SPN DB 02 way,single phase 240 volts Single door with 200 amp rated bus bar complete all as specified and directed by Engr-in-Charge |
| 112 | S&F two single core 2.5 sqmm for sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping with fixing accessories including one run of 2.5 Sq mm copper conductor. (Note - Two runs of 2.5 Sq mm cable, one run of 2.5 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.) complete all as specified and directed by Engr-in-Charge |
| 113 | Deduct Credit for Demolished/Dismantled material Rs (-) 71,345.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule)Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender