Tender For Certain Repairs To Flooring, Plastering. Joinery, Sanitary Fittings , Periodical And Internal Water Supply Incl Misc Repair Works To To Blgd In Nts Gurugram And Certain Repairs To Flooring, Plastering, Joinery, Sanitary, Fittings, Periodic
Tender Value
49.50 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
20 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs To Flooring, Plastering. Joinery, Sanitary Fittings , Periodical And Internal Water Supply Incl Misc Repair Works To To Blgd In Nts Gurugram And Certain Repairs To Flooring, Plastering, Joinery, Sanitary, Fittings, Periodicals And Internal Water Supply Incl Misc Repair Work To Blgs In Gurgugarmbagh Under Ge (Af) Gurgaon
BOQ
| Sl. No. | Item Description |
| 1 | Demolition/Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc,complete all as specified and directed by Engr-in-Charge . |
| 2 | M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as directed by Engr-in-Charge. |
| 3 | Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and as directed |
| 4 | M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement, complete all as specified and as directed |
| 5 | M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and as directed |
| 6 | M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 7 | M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed. |
| 8 | Material and labour for complete of newly plastered surfaces as of walls and applying two coats of cement based paint achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed. |
| 9 | M&L preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed. |
| 10 | Material and labour for complete of newly plastered surfaces as of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer to achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed. |
| 11 | M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 12 | M&L for preparing new plastered surface of Ceilling and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and directed. |
| 13 | Material and labour for preparation of old painted surfaces of steel surface of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed. |
| 14 | Material and labour for preparation of old painted surfaces of concerete surface of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed. |
| 15 | Material and labour for preparation of old painted surfaces of wood and wood based of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and as directed. |
| 16 | M&L for preparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of oil bound distemper, complete all as specified and as directed. |
| 17 | M&L for preparation of old surfaces of cellingincluding brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of white wash on celling, complete all as specified and as directed. |
| 18 | Material and labour for preparation of old plastered surfaces as of walls and applying one coats of cement based paint achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed. |
| 19 | Material and labour for preparation of old plastered surfaces as of walls and applying one Coats of acrylic Weather Coat Exterior Paint achieve uniform and smooth surface by roller brush having no sign of brush marks complete all as specified and as directed. |
| 20 | Demltion of cement concrete complete all as spd and directed |
| 21 | M&L for PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes complete all as spd and directed by Engr-in-Charge. |
| 22 | M & L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring incl demolition complete all as spd and directed by Engr-in-Charge. |
| 23 | M & L for PCC 1:2:4 Type B-1 (using 20mm graded stone aggregate) as in flooring, coping, incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises incl necessary formwork where reqd and complete all as spd & directed by Engr-in-Charge. |
| 24 | Dismantling floor hearth, floor tiles, brick tiles, stone, slabs or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed |
| 25 | M&L for 25mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes complete all as spd and directed by Engr-in-Charge. |
| 26 | M&L for first quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry over and including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. |
| 27 | M&L for first quality coloured glazed ceramic tiles, fixed in pattern of different colour including border of size 350x 450 x 7mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white cement with pigment to match with shade of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), complete all as specified and as directed.. Note :- Pattern of the tiles shall be approved by GE at the time of execution. |
| 28 | M& L for Glazed ceramic jointless light/coloured group of size exc 0.14 Sqm but n.exe 0.36 Sqm, erea of each tiles and thicknes of wall tile not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, complete all as spd and directted. Note : shade & design as approved by EIC/GE complete all as specified. |
| 29 | M&L for ceramic tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles (square or rectangular) area of each tile exe 0.14 Sqm but n.exe 0.36 Sqm, laid in floors set and jointed with neat cement slurry and including 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and as directed. |
| 30 | M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished), floor, wall, pillars in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing complete all as spd and directed. |
| 31 | M&L for Kota Stone 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, flooring platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and complete all as spd and directed. |
| 32 | M & L for chequred tiles of size 300 x 300 x 25mm thick (coloured and approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:4 bedded and jointed in neat cement slurry, complete all as specified and directed by Engr-in-Charge. |
| 33 | M & L for Non skid Endura tiles of size 300 x 300 x 9/10 mm thick (coloured and glazed approved by EIC) with grey cement and colour pigments laid over 15 mm thick screed bed in CM 1:4 bedded and jointed in neat cement slurry, complete all as specified and directed by Engr-in-Charge. |
| 34 | S&F in repair, brass CP central hole mixture 15mm bore (dia) without Popup waste system with 450mm long proivded hoses incl flange suitable for wash hand basin complete all as spd and dircted. |
| 35 | S&F in repair brass CP wall mixture unit HOT and Cold Shower suitable for fixing in 15mm bore dia pipe incl flange complete all as spd and dircted. |
| 36 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. complete all as specified and as directed. |
| 37 | S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and as directed. |
| 38 | S&F in repair plastic water closet seat cover of any color closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, complete all as specified and as directed. |
| 39 | S&F in repairs, Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe), including connection to waste pipe, flushing pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and as directed. |
| 40 | S&F for vitreous China, wash hand basin, counter top, white, of size 530mmx445mmx195mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts,32mm dia, chain and plug, porcelain stopper with and including PVC collapsible waste pipe of suitable length, fixed in repairs, complete all as specified. |
| 41 | S&F wash hand basin table top of size 460x460x170 mm vitrous China including , waste coupling & PVC waste pipe of 32 mm dia etc in repair. complete all as specified and directed. |
| 42 | S & F in repair vitreous china urinals, half stall type (635x450mm) , complete including providing and fixing , bedding urinal against wall in cement mortar 1:2 , pointing around urinal back in cement , grating and union for discharge pipe, CP urinal spreader and fitting with bottel trap & CP waste coupling all as specified and approved by Enger-in-Charge. |
| 43 | S&F for One piece closet with bowl for cupled WC with PP soft seat cover, hinges fixing accessories and accessories set of size 360mmx680mmx765mm, strap 220mm cistern with cistern fittings and necessary fixing fittings complete, fixed in repairs, complete all as specified. |
| 44 | S & F in repairs 600 x 450mm bevelled edge Mirror of selected quality glass, fancy type mounted on 6mm thick AC building board or commercial plywood with wooden frame all round and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 45 | S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors including taking down complete all as specified and as directed. |
| 46 | S & F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors including taking down complete all as specified and as directed. |
| 47 | S&F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling with PCC (1:3:6), type C-0, complete all as specified and as directed. |
| 48 | S & F 35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated and prepared to receive glass, gauge etc edges of framing plain chamfered or rounded fitted with cut & mitred beads for securing glass etc size of members shutter as specified in SSR Part I Section 8, Clause 8.23 (a) supplied and fitted to chowkhats incl 02 x 200mm alumn tower bolt, 02 x alumn door handle, 01 x alumn sliding door bolt 250mm long to each shutter complete all as spd and directed. |
| 49 | S&F factory flush shutter made 30mm IInd class hard wood , solid core construction, with block board core and plywood face panels,one side laminated type incl 02 x 200mm alumn tower bolt, 02 x alumn door handle, 01 x alumn sliding door bolt 250mm long to each shutter complete all as spd and directed. |
| 50 | S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm PVC Prelam colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & complete all as spd and directed |
| 51 | S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm prelam colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing |
| 52 | S&F PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS Square tub, suppling & fixing in opening as per specification and drawing. |
| 53 | S&F in repairs Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed tothe stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 54 | S&F in repairs, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and as directed. |
| 55 | S & F in repair, 3mm thick ordinary glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, incl Hacking out old broken glass complete all as specified and as directed. |
| 56 | Dismantling of old water tank 500 / 1000 Ltr complete all as specified and as directed. |
| 57 | S&F Rotational moulded polyethylene water storage tank 500 litres capacity, ISI marked triple layer construction (cylindrical vertical closed top), hoisted & fixed in position in complete all as specified and as directed.. |
| 58 | S&F Rotational moulded polyethylene water storage tank 1000 litres capacity, ISI marked triple layer construction (cylindrical vertical closed top), hoisted & fixed in position in complete all as specified and as directed.. |
| 59 | &F brass Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms complete all as specified and as directed.. |
| 60 | Dismantling of plain, corrugated or semi corrugated sheeting, of any description, roof coverings all as specified. |
| 61 | Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie complete all as directed by Engr-in-Charge and specified. |
| 62 | S& F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specifed and directed by Engr-in-Charge. |
| 63 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and complete all as directed by Engr-in-Charge and specified. |
| 64 | S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet wood grain / any colour and one side plain colour PVC Sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as spd and directed. |
| 65 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 66 | M&L PVC hollow panelling 10mm thick wood grain teak finished prelaminated inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site on wall / ceiling complete all as specified and directed |
| 67 | M&L PVC hollow Flutted Panel / WPC Louvers 16 to 18mm thick wood grain teak finished prelaminated inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves and screws as required at site on wall / ceiling complete all as specified and directed |
| 68 | Dismantling ceiling board (fiber, pulp insulation) or insulation board/slabs etc including grid work/wooden or aluminium frame works, cover fillet etc Complete all as specified and as directed. |
| 69 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding mild steel frame work using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engr-in-charge. |
| 70 | M&L for perforated particle board/tiles 12mm thick for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or withstaples on snap grid complete all as specified and as directed by Engr-in-charge. |
| 71 | Demoliation of PCC / sub base in sunken / toilet floor area and removing all WCs/WHB or other fittings carefully and keep it safe till refixing complete all as spd and directed. Note : Area includes in this items upto G+8 stories of building, necessary scaffolding and arrangements are deemed to be included in rates. Please Enable Macros to View BoQ information |
| 72 | Demoliation of PCC / sub base in sunken / toilet floor area and removing all WCs/WHB or other fittings carefully and keep it safe till refixing complete all as spd and directed. Note : Area includes in this items upto G+8 stories of building, necessary scaffolding and arrangements are deemed to be included in rates. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender