Tender For Repair And Maintenance Of Internal Electrical Fittings And Fixtures And Other Connected Items At Zone-I Under Ge Brichgunj, Sri Vijaya Puram.
Tender Value
20 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
2 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Internal Electrical Fittings And Fixtures And Other Connected Items At Zone-I Under Ge Brichgunj, Sri Vijaya Puram.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully, copper/aluminium point wiring (Light, fan, scoket or power) complete, including fittings and fixtures such as switches, ceiling roses, regulators, sockets etc., and making good disturbed surfaces of walls floors, etc., complete all as specified and as directed by Engineer-in-Charge. |
| 2 | M&L for Point wiring complete with 1.5 sqmm single core FRLS PVC insulated cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover/Pre moulded PVC switch board for housing the switches, socket outlets, fan regulators etc., complete all as specified and as directed for the following: - One light point/Bell point controlled by one switch |
| 3 | One fan point controlled by one switch and one regulator |
| 4 | One 3 pin switch socket outlet point 5 amps on same board with other switches. |
| 5 | One light point controlled by two two way switch. |
| 6 | One 3 pin switch socket outlet point 5 amps on independent board. |
| 7 | All as per item at sl No.2 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amps independent, with cable 2.5 Sqmm size and 2.5 Sqmm earth continuty conductor, complete all as specified and as directed by Engineer-in-Charge. |
| 8 | M&L for Point wiring complete with 1.5 sqmm single core FRLS PVC insulated cable 1100 volts grade with multistranded copper conductor drawn through and including PVC conduit and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc., complete all as specified and as directed for one light point controlled by one one way switch. |
| 9 | All as per item No. 4 here - in - before but for one fan point controlled by one 5 Amps switch with 1.5 sq mm copper conductor cable. |
| 10 | All as per item No. 4 here - in - before but for 3 pin 5 Amps switch socket combination on independent board. |
| 11 | All as per item No. 4 here - in - before but for 5 Amps socket point on the same board controlled by one switch. |
| 12 | All as per item at sl No.4 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amps independent, with cable 2.5 Sqmm size and 4.0 Sqmm earth continuty conductor, complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Material & labour for point wiring as per colour coding with 1.5 sqmm FRLS PVC insulated stranded copper conductor cable drawn through in and including 19 mm thick rigid non metallic PVC concealed conduit medium quality including new sunken terminal boxes duly epoxy painted and 3mm thick plastic laminated sheet top cover and continuity earth wire PVC insulated copper conductor standard unsheathed of size 1.5sqmm including Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring,etc., and making good and painting as exist at ground, cutting not exc 10 cm girth in brick wall for one light / fan / bell point controlled by one switch complete all as specified and as directed. |
| 14 | M & L for point wiring with PVC insulated FRLS 1100 Volts grade single core multistranded copper conductor cable 1.5 Sqmm drawn through in and including 19 mm thick rigid non metallic PVC concealed conduit medium quality with all accessories, fittings, PVC junction boxes etc, with necessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 1.6 mm thick pressed steel terminal boxes suitable for modular fittings, concealed in wall for mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws and making good the disturbed surface complete all as specified and as directed. One light point/Bell point controlled by one switch |
| 15 | One fan point controlled by one switch and one regulator |
| 16 | One 3 pin switch socket outlet point 5 amps on same board with other switches. |
| 17 | One light point controlled by two two way switch. |
| 18 | One 3 pin switch socket outlet point 5 amps on independent board. |
| 19 | All as per item at sl No.10 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amps independent, with cable 4 Sqmm size and 4Sqmm earth continuty conductor, complete all as specified and as directed by Engineer-in-Charge. |
| 20 | S&F switch piano flush type single pole one way 5 amps, complete all as specified and as directed by Engineer-in-Charge. |
| 21 | S&F switch socket combination 2 in 1, 3 pin (mult pin) 5 amps flush/box type, complete all as specified and as dircted by Engineer-in-Charge. |
| 22 | S&F switch socket combination 2 in 1, 3 pin (mult pin) 5 and 15 amps flush/box type, complete all as specified and as dircted by Engineer-in-Charge. |
| 23 | S&F socket outlet flush type 2/3 pin 5 Amps multipurpose, complete all as specified and as directed. |
| 24 | Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed by Engineer-in-Charge. |
| 25 | S&F Lamp holder(angle type) PVC body with back plate suitable for batten fittings, complete all as specified and as directed by Engineer-in-Charge. |
| 26 | S&F Bell push single phase, 240 Volts, 50 Hz, complete all as specified and as directed by Engineer-In-Charge. |
| 27 | S&F Switch piano flush type single pole two way 5 amps, complete all as specified and as directed by Engineer-in-Charge. |
| 28 | S&F Switch piano type, flush type, single pole, one way, 15 Amps, complete all as specified and as directed |
| 29 | S&F Socket flush type, multi purpose 2/3 pin, 5 Amps & 15 Amps, 230 volts, complete all as specified and as directed |
| 30 | S&F Fan speed regulator, electronic suitable for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed by Engineer-in-Charge |
| 31 | S&F Bell Ding Dong 240 Volts 50 Hz complete all as specified and as directed by Engr-in-Charge. |
| 32 | Supply and fixing Modular switch 1 way 5 A, 1 module complete all as specified and as directed. |
| 33 | Supply and fixing Modular switch 1 way 15 A, 1 module complete all as specified and as directed. |
| 34 | Supply and fixing Modular Bell push 5A, 1 module complete all as specified and as directed. |
| 35 | Supply and fixing modular socket outlet, 2/3 pin combined , 6/16 Amps, combined 2 module, 230 volts complete all as specified and as directed. |
| 36 | Supply and fixing modular socket outlet, 2/3 pin combined , 6 Amps, combined 2 module, 230 volts complete all as specified and as directed. |
| 37 | S & F modular white cover plate with frame, 1 module complete all as specified and as directed. |
| 38 | S & F modular white cover plate with frame, 2 module complete all as specified and as directed. |
| 39 | S & F modular white cover plate with frame, 3 module complete all as specified and as directed. |
| 40 | S & F modular white cover plate with frame, 4 module complete all as specified and as directed. |
| 41 | S & F modular white cover plate with frame, 6 module complete all as specified and as directed. |
| 42 | S & F modular white cover plate with frame, 8 module complete all as specified and as directed. |
| 43 | S&F PVC blanking plate complete all as specified and as directed. |
| 44 | Supply and fixing modular fan step regulator, 230 V, AC, 120W - 2 module complete all as specified and as directed. |
| 45 | Supply and fix in repair metal enclosure distribution board SPN, 12way 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed by Engineer-in-ChargeNote:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc... |
| 46 | All as per item Sr No 37.00 above but distribution board SPN, 8 way 240 volts complete all as specified and as directed. |
| 47 | All as per item Sr No 37.00 above but distribution board SPN, 4 way 240 volts complete all as specified and as directed. |
| 48 | All as per item Sr No 37.00 above but distribution board SPN, 2 way 240 volts, single door complete all as specified and as directed. |
| 49 | S&F Sheet metal enclosures Loadline vertical distribution board TPN, 4 ways 415 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs and in and including 63A MCCB ,16KA as incomming complete all as specified and as directed including taking down old MCB DBs complete including cutting chases pinning in making good to facings where required and pointing in cement mortar 1:3 ends of edges of landing,steps, cills sunsades,shelves,lintels,etc and cutting for concealed conduit wiring etc and making good,cutting not exc 10 cm girth in brick wall complete all as specified and as directed. |
| 50 | S&F in repair metal enclosure distribution board TPN, 4 way 415 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed by Engineer-in-Charge Make :Legrand/C&S/L&T Note:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc... |
| 51 | Supply and fix in repair MCB triple pole and neutral 63 amps B series complete all as specified and as directed by Engineer-in-Charge |
| 52 | S&F in repair MCB single pole and neutral, 240 volts, 32 amps B series complete all as specified and as directed by Engineer-in-Charge . |
| 53 | All as per item no 44 above Capacity 40 Amps complete all as specified and as directed. |
| 54 | S&F in repair MCB single pole 240 volts, 6 to 32 amps complete all as specified and as directed by Engineer-in-Charge |
| 55 | S & F in repairs Single Pole and Neutral Enclosure with Two Pin Earth Plug and Socket complete with one MCB, SP, 20 Amps, 240 Volts fixed on flat iron 32x6 mm or 2nd class hard wood wooden board complete all as specified and as directed. |
| 56 | S&F Air circulating device electric driven I Ø, 400/450mm sweep oscillating type,400/450 mm sweep, high quality ABS base with high speed motor and balanced blades and three leafed with 3 core copper cable of suitable size, complete and taking down of unserviceable item complete all as per specified and as directed. |
| 57 | S&F Air ventilation light weight metal body electric driven AC I Ø, 225mm sweep with louvers including grouting and making whole in wall and taking down of unserviceable item complete all as specified and as directed. |
| 58 | All as per item No. 49 here - in - before but for 150mm sweep complete all as specified and as directed. |
| 59 | M&L for Earthing complete with galvanize steel earth plate electrode 60 cms x 60 cms x6.00mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4.0mm by means of bolts ,nuts ,check nuts and washers of galvanized iron or steel and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron or steel pipe light grade 40 mm bore and water pipe 20 mm bore GI light grade (ISI marked ) with funnel and wire mesh ,including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No, 5 of MES Sch Part-1 (2009), complete all as specified and as directed. |
| 60 | Taking out and dismantling the burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the exhaust fan of size 300/380/400/450mm sweep motor with super enamelled copper winding wire of suitable SWG including varnishing, baking in oven and reassemling refixing at same/ required location, complete all as specified and as directed by Engr-in-Charge. |
| 61 | Taking out and dismantling the burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the wall mounted fan of size 400/450mm sweep motor with super enamelled copper winding wire of suitable SWG including varnishing, baking in oven and reassemling complete all as specified and as directed by Engr-in-Charge. |
| 62 | S&F Ceiling fan suitable for working on AC 230 volts, 50 Hz,1200 mm sweep 5 star rating with down rod and canopy colour of milky white including suitable fan hook anchor flashner for fixing of fan on ceiling complete all as specified and as directed. |
| 63 | S&F in repairs ceiling fan hanging clamp with bush,locking pin and nut and bolt Including taking down complete all as specified and as directed by Engineer-in-Charge. |
| 64 | S&F in repalcement canopy of ceiling fan, complete all as specified and as directed by Engr-in-Charge. |
| 65 | S&F in repair ball bearing suitable for ceiling fan of any sweep and make complete all as specified and as directed by Engr-in-Charge. |
| 66 | S&F in repair down rod of appropriate size suitable for ceiling fan of any sweep and make complete all as specified and as directed by Engr-in-Charge. |
| 67 | S&F in repair fan blade appropriate size suitable for ceiling fan of any sweep and make complete all as specified and as directed by Engr-in-Charge. |
| 68 | S&F in repairs ball bearing suitable for exhaust fan of any sweep and make complete all as specified and as directed by Engr-in-Charge. |
| 69 | Taking down exhaust fan of any size/sweep from existing position complete with blades from brackets etc and servicing the same properly by cleaning, greasing, oiling replacing the unservicable spare parts etc, and reassembling and refixing in the same position complete all as specified and as directed by Engr-in-Charge. (Note: cost of spare parts shall be measured and paid separately as supplied only. The cost of labour for replacement of spare parts deemed to be included under this item) |
| 70 | Taking down wall mounted fan of any size/sweep from existing position complete with bladesfrom brackets etc and servicing the same properly by cleaning, greasing, oiling replacing the unservicable spare parts etc, and reassembling and refixing in the same position complete all as specified and as directed by Engr-in-Charge. (Note: cost of spare parts shall be measured and paid separately as supplied only. The cost of labour for replacement of spare parts deemed to be included under this item) |
| 71 | M & L for repairs sub main wiring complete with three runs of 6 Sqmm FRLS single core PVC insulated single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessories fixed to wall/ roofs/ floors etc with one run of 6 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Three runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre. |
| 72 | M & L for repairs sub main wiring complete with two runs of 6 Sqmm FRLS single core PVC insulated single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessories fixed to wall/ roofs/ floors etc with one run of 6 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre. |
| 73 | All as per above item Sr No 64.00 but of size 4 sqmm complete all as specified and as directed. |
| 74 | All as per above item Sr No 64.00 but of size 2.5 sqmm complete all as specified and as directed. |
| 75 | All as per above item Sr No 64.00 but of size 1.5 sqmm complete all as specified and as directed. |
| 76 | S & F LED light fitting 7 Watt,6500k round/ sqaure shaped recess mounted LED slim panel with diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable surface mounted fitting of any wattage, complete all as specified and as directed by Engineer-in-Charge. |
| 77 | S & F LED spot light fitting 7 Watt, 3000k housing square/round shaped Recess mounted LED slim panel with PMMA diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable spot fitting of any wattage, complete all as specified and directed by Engineer-in-Charge. |
| 78 | S & F Wall light suitable for LED Lamps upto 20 Watt of B22 base, white colour provided with high output diffuser and metal base, prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable wall light fitting of any wattage, complete all as specified and directed by Engineer-in-Charge. |
| 79 | S&F Recess/ surface mounted LED 12 w Round type downlighter with die cast aluminium housing coating prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable fitting of any wattage, complete all as specified and directed by Engineer-in-Charge. |
| 80 | S&F Recess/surface mounted LED slim 15 w Round type downlighter with die cast aluminium housing prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable fitting of any wattage, complete all as specified and directed by Engineer-in-Charge. |
| 81 | S & F LED tube light fitting 2 feet, 1 x 10 Watt provided with high output diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable light fitting of any wattage, complete all as specified and directed by Engineer-in-Charge. |
| 82 | Supply and fixing LED lights fitting 1x 20W, 220V, aluminium housing AC decorative box type 4 feet with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed and as specified by the engineer in charge. |
| 83 | S & F in replacement recess mounting type LED Panel lights fitting of dimension 2x2 feet, 36W, 220V, AC with driver including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed and as specified by the engineer in charge. |
| 84 | S & F LED Cove lighting ( Each Cove lighting Lenth 5 mtr)provided with high output diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable cove light fitting of any wattage, complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender