Tender For Repair/Maint Of Floor/Wall Tiling, Pvc Panelling, Joinary Work And Other Connected Works Of A, B, C, D Blocks Under Ge E/M repair renovation Hospital Delhi Cantt-10
Tender Value
40 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
3 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Floor/Wall Tiling, Pvc Panelling, Joinary Work And Other Connected Works Of A, B, C, D Blocks Under Ge E/M repair renovation Hospital Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 2 | M&L 3.2mm thick lead glass radiation resistence for x ray radiation fixing with all fitings and fixture complete all aspecified |
| 3 | M&L for vitrified ceramic coloured tiles 8 to 9mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid incl over 15mm thick cement screed bed in CM 1:6 complete all as directed. |
| 4 | M&L for Virified Ceramic tiles light shade -8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid incl over 15mm thick cement screed bed in CM 1:6 complete all as directed. |
| 5 | M&L for vitrified ceramic coloured tiles 8 to 9mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in verticle surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid incl over 10mm thick cement screed bed in CM 1:4 complete all as directed. |
| 6 | M&L for dismantling stone slabs laid bedded and pointed in any morter and tiles of any description or thickness in floors, aprons etc |
| 7 | M&L Granite (of any type) tiles 18-20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing laid incl over 15mm thick cement screed bed in CM 1:6 complete all as directed. |
| 8 | Dismantling of wall and ceiling board/WOODEN PARTITION of any description, any thicknes including cover fillets and frame work complete all as specified and directed by the Engr-n-Charge |
| 9 | M&L for exposed GI frame/grid system duly powder coated for module size of 595x595 mm suitable for lay-in aluminium / mineral fibre ceiling tiles, having main T runner of 24 mm size, suspended at 1200mm C/C and cross T runner of 24 mm size, suspended at 600mm C/C with interlocking arrangements to form grid of 595x595mm, perimeter runner/channel of 15 mm size, main and cross T runner supported by 4mm dia GI rod from slab / Roof, wall angle etc with and including all fixing accessories and making good of distrubed wall surfaces complete all as directed. |
| 10 | M&L for metal false ceiling, lay-in type, 0.5 mm thick, having tegular edge profile, duly powder coated, perforated type with glass fibre acoustic fleece, suitable for false ceiling grid/frame module of 595x595 mm size, complete all as directed (Note : The grid /frame shall be measured and paid for separetly.) |
| 11 | Supply & fixing of false ceiling in step (s) comprising of 12 mm thick Gypsum board including GI frame work for seamless ceiling made of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 M length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including two coats of plastic emulsion paint complete all as directed. Note:- the work will be executed as per patten/design as per site required.but mesured flat. |
| 12 | S & F solid PVC wall panelling consisting of 5mm thick wood grain finish PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified. |
| 13 | S & F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 14 | S & F solid PVC leeping of 2mm thick wood grain finish PVC sheet is heatbent as lipping on the edges of doors, windows & other edges inclusive of solvent cement and fixing at site complete all as specified. |
| 15 | S & F PVC louvers thisckness wall panelling any colour or pattern as approved of min size 16cm wide ,8mm-25mm overall thick and min 0.90mm wall thickness fixed including necessary fixing arrangement like fillate cleat back framing etc and side beadings as per specifications and manufacture instruction complete all as specified. |
| 16 | S&F in repairs stainless steel curtain rod 20-22mm dia including brackets, side knobs etc, fixed to walls, complete all as specified and directed. |
| 17 | S&F in repair of ROLLER blinds vertical type 100% polyster (translucent) wt 230gm/sqm made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified. |
| 18 | S & F Solar control film 25micron reflective type sticked to glass panes as per instruction of manufacturers complete all as specified. |
| 19 | Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge. |
| 20 | M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and fair without using extra cement, complete all as specified & directed. |
| 21 | M&L for 5mm thick rendering on concrete ceiling surfaces in cement mortar 1:3, finished the surface even and fair, complete all as specified and directed. |
| 22 | Preparing new plaster surface by washing rubbing down and stopping of distempered and painted surface and applying two coats of distemper oil emulsion on surface of walls over two coat of wall care putty all as specified and directed. |
| 23 | Preparing new plaster surfaces of ceilings by brooming down or by steel wire brushing and applying two coat oil emulsion distemper over two coat of wall care putty on ceiling all as specified and directed. |
| 24 | M&L preparing old decorated surfaces/plastered or unplastered) of walls including brooming down or steel wire brushing scrpping down smoke soot moulds, moss & efforescent salts and tracling oil and greasy spots and applying two coat of OBD all as specified and directed. |
| 25 | M&L preparing old decorated surfaces/plastered or unplastered) of ceiling including brooming down or steel wire brushing scrpping down smoke soot moulds, moss & efforescent salts and tracling oil and greasy spots and applying one thick coat of OBD all as specified and directed. |
| 26 | Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as directed. |
| 27 | M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 etc, complete all as directed. |
| 28 | Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) all as specified and directed. |
| 29 | S&F in repair zebra blinds made out of fabric cloth or as required of approved shade fixed as per the instructions of manufacturers, complete all as specified and directed . |
| 30 | Taking down of door frame or chowkhat ( with out taking off shutters from the frame) n exc 1.50 of each complete all as specified and directed. |
| 31 | Taking down of door frame or chowkhat ( with out taking off shutters from the frame) exc 1.50 of each but not exc 4.00 Sqm complete all as specified and directed. |
| 32 | S&F, Powder coated aluminium chowkhats of 100x44x1.5mm section with rebate complete frame all as specified and directed. |
| 33 | Supply only 3mm thick aluminium composite panel (ACP Sheet) including necessary clips, rubber packing & aluminium beading (aluminium frame ) all as specified. |
| 34 | Supply fabricating and fixing aluminium door powder coated of extrusion aluminium section, vertical style of door shutter of size 85mmx44.45mmx0.5mm thick. Top, middle and bottom rail of size 85mmx44.45x0.5mm thick and fixing 4.8 mm thick plain/tinted sheet glass or 3MM thick aluminium composite panel with aluminium beading and rubber gasket/beading as directed including provision of one mortice lock for aluminium door (each)and 3 nos of alminim hinges of size 100mm and two aluminium tower bolts of 200mm size for each door fixed with rawl plug and handles 200mm including making good of floor/wall to match the existing surfaces all as specified and as directed. z(Note:-Sheet glass Plain/frosted/particle board/ACP sheet shall be measured and paid seperately ) |
| 35 | Supply only 4.8mm thick plain glass fixed with beading in alminium frame all as specified and directed. |
| 36 | Supplying, fabricating & fixing aluminium powder coated glazed three track sliding window of frame 92mm x 31.75mm x 1.50mm and sliding shutter of section 40mm x 18mm x 0.91mm thick including 4mm thick sheet glass, ordinary quality exceeding 0.50 Sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.30mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all fittings such as aluminium handle of size 100mm and locking arrangement with each moving leaf, complete all as specified & directed. |
| 37 | S&F aluminium Deco grill with powder coating (minimum thickness of powder coating 50 micron), 7.5 mm size DG-102, fixed to E/H frames, 1.5mm thick, bar size 6.2mm and 7.5mm thick in required sizes, complete all as specified and directed. |
| 38 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2 mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor including cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 39 | Providing and fixing factory made uPVC white colour partially fixed and openable(size & opening as directed) window made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm),T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2 mm thick galvanised steel Frame (28mm x 21.5mm) T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, -5mm thick glazing with selected quality glass(Note: The unit rate quoted by contractor including cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 40 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size Frame size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Note:- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 41 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges shall be paid separately) |
| 42 | S&F Stainless Steel butt hinges 100mm size complete all as specified and directed . |
| 43 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and directed .. |
| 44 | S&F aluminium anodised barrel tower bolt 200mm long extruded section all complete all as specified and directed . |
| 45 | S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified and directed . |
| 46 | S&F aluminium partition wall of aluminium section 100mm x 44mm x 1.5mm thick frame rectangular section and including panel of ACP sheet or prelaminated board in bottom panel and 5.5mm thick sheet glass in top panel with rubber lining and aluminium beading around length including necessary fixing arrangement for bottom and top member of aluminium frame in floor/PCC/Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre all as specified and directed by Engineer-in-Charge.(Note : Cost of ACP sheet or prelaminated board and sheet glass shall deemed to be included in the rate quoted for this item ) |
| 47 | S&F in repair toughened glass frameless door with fixed portion, of 12 mm thickness, including cutting holes, edges rounded and etching works etc and all kind of SS patch fitting & fixture, spider patch etc, complete all as directed. |
| 48 | S&F of stainless steel handle 450 mm long fixed to 12 mm thick toughned glass door with and including all fixing accessories i. e. bolt washer, adhesive etc, complete all as directed. |
| 49 | S&F of SS door lock, glass to glass type, suitable for 12 mm thick frameless toughned glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc of suitable size, complete all as directed. |
| 50 | M & L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 51 | Dismantling boarding, any description including fillets fixed in any position with nails and removed all as specified and directed |
| 52 | M&L 18 mm thick MDF board with both side laminated fixed with SS screws as in cupboard and cupboard shutters including leeping/beading fancy type and polish of the same 0.9 mm thick decorative laminate type 1,of surface finish, colour and other side white colour etc, complete all as specified and as directed. |
| 53 | All as per ser item No 52.00 above but 12mm thick but laminate finished with both side white as in cupboard drawer all as specified. |
| 54 | S&F telescopic type ball bearing slide & runner, suitable for drawers, complete all as directed. |
| 55 | S&F continious(Piano) hinges, mild steel,bright finish or electrogalanised.40mm width complete all as specified and directed |
| 56 | S & F100 mm long Extruded SS handles, fabricated type, polished |
| 57 | S&F 40mm dia cup board/drawer SS knob fixed with screw all as specified |
| 58 | S&F magnetic catcher suitable for cupboard, complete all as directed. |
| 59 | Dismantling mild steel work of any description not otherwise provided for by cutting the rivets or by gas cutting |
| 60 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 all as specified and directed. |
| 61 | Dismantling asbestos cement (corrugated, semicorrugated etc.) sheets in roof coverings etc complete all as specified and as directed. |
| 62 | Pre -painted galvanume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of550 Mpa as in roof covering /clading to wall, fixed with self tappng screw as specifide and directed. |
| 63 | S&F pre-painted galvaume aluminium zink coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covelring/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed. |
| 64 | S&F mild steel framed work conforming to Fe-410-O as in doors or gates of angle or other section with gusset plates,rails,braces,etc. complete drilled for fixing steel sheeting or other covering to be prepare for hanging including either hooks or hinges etc. complete all as spicified and directed. |
| 65 | S&Fin repair of mortice lock vertical type 100mm size 4 lever with two keys with SS natural matt finish body with SS matt finish lock handles, complete all as per site Required and directed. |
| 66 | Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel over a coat red oxide paint all as specified and directed. |
| 67 | Mirror pollishing on kota stone/marbal where ever required to give high gloss finish complete all as directed by Engineer in charge. Note:-Rate for complete work including grinding, cleaning, washing as per direction and site requirement shall be included. |
| 68 | S&F in repair Aluminium (Diecast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg all as specified and directed. |
| 69 | S&F in repair Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring fixed in floor, complete all as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender