Tender For Comprehensive Maintenance To Certain Md Accn, Messes, Billets, Repair To Static Water Tank, Fencing And Other Allied Misc Works At Af Stn Faridabad Under Aor Of Ge (Af) Faridabad
Tender Value
45 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
11 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridabad → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance To Certain Md Accn, Messes, Billets, Repair To Static Water Tank, Fencing And Other Allied Misc Works At Af Stn Faridabad Under Aor Of Ge (Af) Faridabad
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quoins, arches , pillars etc but excluding precast concrete articles, complete all as specified and directed. |
| 2 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing ),and removing rubbish off the premises , complete all as specified and directed |
| 3 | M&L for glazed ceramic coloured tiles of (450x300mm) x 7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in CM (1:4) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles ,complete all as specified and directed. |
| 4 | M&L for Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed. |
| 5 | Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land ,complete all as specified and directed. |
| 6 | M&L for rendering 15 mm thick cement plaster in cement mortar (1:6) on fair faces of brick works or concrete surfaces , finished even and smooth without using extra cement , complete all as specified and directed. |
| 7 | M&L for rendering 5 mm thick on RCC ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement , complete all as specified and directed. |
| 8 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound @ 3 % by weight of cement, , finished even and smooth without using extra cement,complete all as specified and directed.Note - WPC shall be measured & paid separately. |
| 9 | M&L for Preparation of new plastered or un plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of Chalk whitening , complete all as specified and directed |
| 10 | M&L for Preparation of new surfaces of ceiling,chajja etc, including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying three coats of white wash, complete all as specified and directed. |
| 11 | Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15 cm thickness (below or above ground level), including removal of rubbish outside MoD land, complete all as specified and directed. |
| 12 | M&L for Plain cement concrete type B-1(1:2:4) using 20 mm graded stone aggregates as bed block ,coping , cills, steps etc , complete all as specified and directed. |
| 13 | Taking up or down 15 mm bore steel tubing with connections or fittings from wall, ceiling and floor etc., including cutting/chasing in wall/floor and removal from site, complete all as specified and directed. |
| 14 | S&F 20 mm bore ,CPVC medium grade , with all fittings (like Elbow , Tee, Socket, Gi pipe connecter, nipples, tank adaptor etc) and fixed complete to walls and ceilings or laid in floors or concealed, complete all as specified and directed. |
| 15 | Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutters) complete all as specified and directed. |
| 16 | Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutters) complete all as specified and directed. |
| 17 | Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified and directed. |
| 18 | S&F, Factory made, 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commertial type on both sides, fitted to chowkhats of 2nd class hard wood (hollock) , complete all as specified and directed. |
| 19 | S&F 35 mm thick 2nd class hardwood (Hollock) skeleton shutters, open rebated and prepared to receive wire cloth, glass etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, wire cloth etc., sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24(a), complete all as specified and directed. |
| 20 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size65 x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 21 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size65 x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardan and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 22 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary S S screws shall be paid separately |
| 23 | S&F for Factory made solid panel PVC wire gauge door shutter 30 mm thick (style) with both side prelam PVC sheet, consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of wire gauge to be fitted in the M.S. frame welded / sealed to the stiles & rails .The wire gauge shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tube. The wire gauge shall be streched to tighten firmly including S&F in the frame at site as per specification and drawing. |
| 24 | S&F, Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted as per specification & drawing and as per manufacturer's instructions and shown on drawing on Page 160 of SSR Pt-II ,complete all as specified and directed. |
| 25 | S&F, Factory made solid panel PVC Door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side as gap insert for top rails, bottom rail,panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supply & fixing in the frame at site as per specification and drawing on Page No 156 of SSR Part-II Rates,complete all as specified and directed. |
| 26 | M&L for Mild steel framed work such as in doors/chowkhats or gates of angle or other section with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (exclusive of steek sheeting or other covering, running rails and guides) and hanging, also fastening & fixing and similar work conforming to Fe-290 grade E-165 , complete all as specified and directed |
| 27 | S&F, Aluminium handles ,plate cast type anodised of 150 mm size , complete all as specified and directed. |
| 28 | S&F, Aluminium anodizes barrel tower bolts of extuded section and fixed of 200 mm size, complete all as specified and directed |
| 29 | S&F, Butt hinges medium weight cold rolled steel of 100 mm size and fixed ,complete all as specified and directed. |
| 30 | S&F, Aluminium alloy, anodized, door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250 mm, bolts not less than 16mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked ) , complete all as specified and directed |
| 31 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples complete all as specified and directed. |
| 32 | M&L for preparing new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer , complete all as specified and directed. |
| 33 | M&L for preparation of new wooden surfaces of any description, exceeding 10 cm width or girth of any description and applying two coats of synthetic enamel paint over one coat of pink primer , complete all as specified and directed |
| 34 | S&F in repair for rotational moulded polyetheylene water storage tanks (cylindrical vertical with closed top) of 500 ltr capacity, hoisted and fixed in any position incl 20mm dia ball float valve with aluminium fiting, GI nipple any fitting dismantling exising water tank complete all as specified and directed |
| 35 | Dismatling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 36 | M&L for providing & fixing false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of perforated Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tiles fully mm center to center and 40mm long dry wall wood screws. (WITH SEMI PERFORATED 12MM THICK MICRO TEGULAR EDGED GRG FALSE CEILING TILES)The work shall be carried out as per specifications, drawing and as per directions of the Engineer-inCharge. |
| 37 | S&F 25mm thick lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified and directed. |
| 38 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 39 | S&F in repair aluminium(Die cast)body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. |
| 40 | S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 41 | S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed. |
| 42 | S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 43 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard sectionand fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 44 | S&F 4.0 mm thick Sheet glass, ordinary quality and glazing in square area not exceeding 0.5 sq. m in each pane for aluminium door /window shutter complete all as specified and directed. |
| 45 | S&F 4.8mm thick Sheet glass, ordinary quality and glazing in square area exceeding 0.5 sq. m in each pane for aluminium door /window shutter complete all as specified and directed. |
| 46 | S&F 12 mm thick Pre laminated exterior grade both side laminated board decorative choice lamination fixed with screws to timber frame work /aluminium frame complete all as specified and directed. |
| 47 | Dewatering ,cleaning and removal of all scale ,dirt etc froPVC tanks,capacity500&1000 Ltrs by using following:- (a) Dewatering and cleaning with mechanized process.(b) Scrubing all internal surface of tank by steel wool with using specialized solution like swipe pro etc to remove all scale and dirt. ( c) Clean all Scales and dirt by using vaccum cleaner. ( d) Finally clean the tank and mouth of circulating pipes etcwith clean water .Marking with white paint on tank 'Date of cleaning water tank; complete all as specified and directed. |
| 48 | S&F PVC tank lid (cover) suitable for 500/1000 litres capacity water tank with hinged and hooked fixing by steel screw for existing PVC water tank on buildings, fixed in repair, complete all as specified and directed. |
| 49 | S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and hidhg density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repair. (Min Wt 20mm - 210 gms) complete all as specified and directed. |
| 50 | S&F, Plastic water closet seat white closed pattern with flat bottom and over and mild steel chromium plated or aluminized hinging device , fixed as in repairs,complete all as specified and directed. |
| 51 | S&F in repair , Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows, or Stainless steel wire staples complete all as specified and directed. |
| 52 | Supply only water proofing compound complete all as specified and directed. |
| 53 | Taking down existing water proofing treament any nos of layers and of any description, incl.demolition and taking off PCC padding/plaster on RCC slab,also including removing of bitumen coating to show the concrete surface to its true colour and roughening etc and also removing the debris outside the MOD land complete all as specified and directed |
| 54 | Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 including macthing existing surfaces complete all as specified and directed. |
| 55 | M&L for cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) on roof padding avg. thickness of 40 mm in slope finished even and fair complete all as specified and directed. |
| 56 | M&L for 15 mm thick Screed bed in cement mortar 1:3 mixed with integral water proofing compound as per manufacturers instrustruction complete all as specified and directed. Note: Water proofing compound measured sesperatly. |
| 57 | M & L for laying APP modified membarane with non woven polyester reinforcement mat (concrete core) not less than 3 mm thick & not less than 3.5 kg /sqm, the over the lap otching shall be 100 mm on length side & 100 mm on widthe side over a tack coat of Industrial bitumen of 1.20 kg / Sqm over Bituminious based primer IS No. 3383@ 250 gms/sqm including apply of Aluminium colour synthetic enamel paint @ 200 gms/sqm all as per manufacture's instruction complete all as specified and directed.Note: Supply only integral water proofing compound shall be measured and paid separately. |
| 58 | S&F in repair Butt hinges medium Stainless steel of 75 mm size and fixed ,complete all as specified and directed. |
| 59 | Dismantling of stone slabs & pavers blocks/tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and directed.. |
| 60 | M&L for Granite 20 mm thick (of any type ) (table runned and polished ) in floors steps , jamns, pillars,window-cills,cooking plateforms and vertical surfaces bedded and jointed with grey cement slurry and pointing in white ciment (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 61 | S&F in repair PVC door seal / snake guard including accessories items nails screw etc. complete all as specified and directed. |
| 62 | M&L for welding in repairs n.exc.6mm thick of metal to be welded n.exc 2.5 cm in length complete all as specified and directed. |
| 63 | M&L for 75mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate in sub base.complete all as specified and directed. |
| 64 | M&L for sand cushioning for laying of inter locking tiles (paving blocks) complete all as specified and directed. |
| 65 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm tickness , M-35 grade, set, jointed and pointed in neat cement slurry in floors with grey cement & pigments ,complete all as specified and directed. |
| 66 | S&F Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 67 | M&L Chequered cement concrete tiles20cmx20cmx25mm thick, set jointed and pointe in neat cement slurry with grey cement and pigment over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 68 | M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in side of path / benching / coved fillets etc rounded or chamfered on edges.complete all as specified and directed. |
| 69 | M & L for 75mm th PCC 1:3:6 type C-2 as in plinth protection, finished even and fair complete all as specified and directed. |
| 70 | M&L for providing precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in window or door cills, lintels, posts, boundary pillars, frames etc and similar works, of any section directed, with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM 1:4 complete with joints to match. complete all as specified and directed.. |
| 71 | M&L for providing precast cement concrete (1:2:4 type B0 using 12.5mm graded stone aggregate) louvers and jallies, 40mm thick (measured solid), including all mouldings but excluding frame, set in CM 1:4. complete all as specified and directed. |
| 72 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles.complete all as specified and directed. |
| 73 | M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 74 | All as per item No 73 above but except bricks. |
| 75 | Taking down of cement or cement lime plaster/tile work any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 76 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls complete all as specified and directed. |
| 77 | M&L for Painting to new or previously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of Zinc chrome primer including preparation of surfaces. complete all as specified and directed. |
| 78 | M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of oil bound distemper over applying a coat of wall care putty on walls 1mm thick complete all as specified and directed. |
| 79 | M&L for two coat of cement base paint on old decorated plastered surface of wall including complete removal of existing treatment & preparation of surfaces complete as as specified and directed |
| 80 | M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of wheather coat/ exterior emulsion paint of electric blue or AF blue colour or equivalent colour as approved by GE, using ultra clean paint over the old decorated wall surfaces , edges of slab, roof/chajja projection and column etc, after necessary preparation with all vaccume based sanding machine complete all as specified and directed. |
| 81 | M&L for preparation of old painted surface of steel & iron work of any description not specifically mentioned otherwise over 10cm width or girth & applying one coat of synthetic enamal paint complete all as specified and directed. |
| 82 | M&L for preparation of new steel/iron surfaces of any description applying two coates of synthetic enamel ordinary tint over coat of red oxided of any description n exc 10 cm girth , not otherwise described. complete all as specified and directed. |
| 83 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, fascias, fins and similar works. complete all as specified and directed. |
| 84 | M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopie, deck slabs and in shelves and the like complete all as specified and directed. |
| 85 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete.complete all as specified and directed. |
| 86 | M&L for formwork to edges of concrete flats, roofs, floors etc not exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide for fair finished surfaces. complete all as specified and directed. |
| 87 | S&F TMT MS bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia. complete all as specified and directed. |
| 88 | S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc. complete all as specified and directed. |
| 89 | S&F mild steel work such as in angle iron, flat iron fillets etc for horn, fixing of barbed wire to RCC post, securing wire mesh etc. including all necessary cuttings, drilling, bolting or riveting etc and including 10mm MS bars as in tie bars fixed to fencing posts including necessary welding where required, as per site requirement and other similar works complete, conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 90 | S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed.Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment. |
| 91 | Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50m complete all as specified and directed.. |
| 92 | M&L for PCC 1:3:6 type C-2 in fdn filling and mass concrete and filling of footing for fencing post complete all as specified and directed. |
| 93 | M&L round bars Fe 410W of 10 mm dia and above cut to length, bent to shape required, cindluding cranking, bending spirally for hooping and fixing as required complete all as specified and directed.. |
| 94 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10cm long and dia 5 to 10 mm complete all as specified and directed.. |
| 95 | Supply only chain link MS galvanised fencing, of any size and type complete all as specified and directed. |
| 96 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire.( Supply of chain link shall be measured under serial Item No 95 here-in-after) |
| 97 | Dismantling fencing wire mesh,any type complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender