Tender For Provision Of Borewell With Connected Items For Inf Bn At Sando And Kill Base Under Ge Kargil.
Tender Value
59.96 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
18 days left
EMD
1.15 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kargil → Jammu And Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Borewell With Connected Items For Inf Bn At Sando And Kill Base Under Ge Kargil.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Excavation in trenches in hard/dense soil not exceeding 1.5mtr wide and not exceeding 1.5 depth, for foundation, etc, or for shafts, wells, cesspits, manhole, pier holes etc not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out, complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Excavating in trenches, n exc 1.5 m wide and exc 1.5 m inc depth for foundation,laying of Pipes etc and n exc 10 sq m on plan for manholes etc and n exc 3.0 m in depth and getting out in Hard/Dense soil complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Removing excavated soil to a distance not exceeding 50 metere and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and labour for broken stone and boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Material and labour for type D2 1:4:8 (40mm graded aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Material and labour for 100mm thick Cement concrete type B-2, 1:2:4 (40mm graded aggregate) without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Supply and fix 38mm width of strip Aluminium dividing strips, 1.5mm thick, inserted in position, conform to design complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Material and labour for 75mm thick, plain cement concrete, type C-2 1:3:6 (using 40mm graded stone aggregate) as in plinth protection work and similar, surface finished even and rough to receive floor topping, complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Supply and fix Joist, channel, angle, or tee sections,of Fe-410- W(GdeE-250) qualityB fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Supply and fix 0.5mm Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Material and labour for preparing new steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Reinforced concrete pipes of dia 200mm, class NP3, laid and jointed complete with collars complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Concrete bed to drain pipes of dia 200mm cement concrete 1:3:6 including packing under and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Pre-cast cement concrete block masonry with solid blocks, of cement mortar 1 type C1 1:3:6 (20mm graded aggregate) exc. 10 cm in width and setting in mortar, complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Material and labour rendering 15mm thick cement plaster in cement mortar (1:4) finished even & fair without using extra cement on brick/concrete surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Material and labour for two coats of cement based paint on newly plastered surfaces of walls over a coat of primer including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 20 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Material and labour for Point wiring for light/fan/bell with FRLS cable of 1.5sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate,flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material and labour for Point wiring for one 3 pin socket outlet for 15 A Ind Board with FRLS cable of 2.5 Sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including PVC conduit min 25 mm dia medium grade ISI Mark with all accessories and 2.5 Sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate, flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and as directed by Engineer-in-Charge. |
| 23 | Material and labour for submain wiring comprising single core, 2 runs of 6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheated 1100 Volts grade drawing in and including PVC casing caping ISI marked (heavy duty) and its fittings on surface / recessed complete including provision of 1 x 6.0 sqmm nominal cross sectional area multi stranded FRLS copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire and using color code as per IS complete all as specified and as directed by Engineer-in-Charge.Note: Extra length of cables / wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly. |
| 24 | Material and labour for submain wiring for connection of tracer wire etc of PVC insulated and PVC Round Sheathed 3-core Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, 1.5 sqmm in and including rigid PVC conduit of size 25 mm ISI mark and its accessories with fixing arrangements on pole, surface, wall, ceiling and trenches at a depth and width of min 150mm etc complete all as specified and as directed by Engineer-in-Charge.Note : One run of 3-core Copper Conductor (flexible) industrial cable, one run of PVC conduit together taken as one length for measuring unit length. |
| 25 | Supply and fix of Switch piano flush type 5 Amps, single pole one way complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Supply and fix of Ceiling rose on PVC Square Block surface bakelite 65x50mm, two to three terminals complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Supply and fix LED white colour 1x18 Watt, 220 V, AC, Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use, connecting up with two/three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engineer-in-Charge. |
| 28 | Supply and fix sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 04 way with 200Amp rated bus bar including blanking plates where required complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Supply and fix 240V, 10 KA C curve miniature circuit breaker (MCB) SPN 40 to 63 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge. |
| 30 | Supply and fix 240V, 10 KA C curve miniature circuit breaker (MCB) SPN 5 to 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Supply, laying and testing of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volts grade of size 25 Sqmm 4.0 core complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Drilling the Pilot (Trial) bore well for boring trial bore well by reaming as per IS 2800 in any strata upto following depth of 200 mm dia bore to deliver 6 LPS quantity of water i.e. yield complete all as specified and as directed by Engineer-in-Charge. |
| 33 | Depth upto 25 m |
| 34 | Depth from 26 m to 50 m |
| 35 | Depth from 51 m to 75 m |
| 36 | Depth from 76 m to 100 m |
| 37 | Depth from 101 m to 125 m Please Enable Macros to View BoQ information |
| 38 | Depth from 101 m to 125 m Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender