Tender For Repair To Wooden & Steel Furniture At Kaluchak, Ratnuchak, Digiana Grn & Bd Bari Mil Stn Under Ge Kaluchak
Tender Value
49 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
19 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kaluchak → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Wooden & Steel Furniture At Kaluchak, Ratnuchak, Digiana Grn & Bd Bari Mil Stn Under Ge Kaluchak
BOQ
| Sl. No. | Item Description |
| 1 | PEG TABLE : FD-26,277 & 384The following repairs shall be carried out to Peg Table after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:- |
| 2 | Top made out of 18mm thick pre-laminated MDF board exterior grade (size of 450mmx300mm) with teakwood edging all around of color & texture as approved by GE. |
| 3 | Leg (20mmx30mm of 380mm High) |
| 4 | Rail (20mm x40mm of 410mm long) |
| 5 | Rubber/PVC shoes (along with screw) |
| 6 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 7 | TEAPOY : FD-232,278 & 382The following repairs shall be carried out to teapoy after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:- |
| 8 | Top made out of 18mm thick pre-laminated MDF board (sizze 450mmx600mm) exterior grade with teakwood edging all around of color & texture as approved by GE. |
| 9 | Leg (30mm x 60mm of 540mm high) |
| 10 | Rail (20mm x50mm of 480mm long) |
| 11 | Rubber/PVC shoes (along with screw) |
| 12 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 13 | TABLE CENTRE : FD-29,235 The following repairs shall carried out to Table Centre after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:- |
| 14 | Top made out of 18mm thick pre-laminated MDF board (size 450mm x 900mm) exterior grade with teakwood edging all around of color & texture as approved by GE. |
| 15 | Leg (30mmx60mm of 400 high) |
| 16 | Long Rail (20mmx50mm of 780mm long) |
| 17 | Short Rail (20mmx50mm of 410mm long) |
| 18 | Centre stiffener (20mmx50mm of 410 mm long) |
| 19 | Rubber/PVC shoes (along with screw) |
| 20 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 21 | TABLE WRITING: FD-33(M), FD-275, FD-268The following repairs shall carried out to Table writing after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:- |
| 22 | Top made out of 18mm thick pre-laminated MDF board (size 1145mmx600mm)exterior grade with teakwood edging all around of color & texture as approved by GE. |
| 23 | Leg (25mmx55mm of 760mm long) |
| 24 | Long Rail (25mm x50mm of 760mm of long) |
| 25 | Short Rail (25mmx50mm of 600mm long) |
| 26 | Centre stiffener (25mmx50mm of 1095mm of long) |
| 27 | Rubber/PVC shoes (along with screw) |
| 28 | Drawer (as per drg) |
| 29 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 30 | TABLE 3X3:- FD-291/FD-88(M)The following repairs shall carried out to Table 3x3 after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:- |
| 31 | Top made out of 18mm thick pre-laminated MDF board (size 900mmx900mm)exterior grade with matching teakwood edging all around of color & texture as approved by GE. |
| 32 | Leg (35mm x 60mm of 760mm long) |
| 33 | Long Rail ( 20mmx50mm of 830mm long) |
| 34 | Short Rail (20mmx50mm of 780mm long) |
| 35 | Rubber/PVC shoes (along with screw) |
| 36 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 37 | TABLE 3X2 W/O DWR: FD-284The following repairs shall carried out to Table 3x2 w/o dwr after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:- |
| 38 | Top made out of 18mm thick pre-laminated MDF board (size 900mmx600mm) exterior grade with matching teakwood edging all around of color & texture as approved by GE. |
| 39 | Leg (30mmx60mm of 760mm long) |
| 40 | Long Rail (20mmx60mm of 780mm long) |
| 41 | Short Rail (20mmx600mm of 540mm long) |
| 42 | Centre stiffener (20mmx50mm of 540 long) |
| 43 | Rubber/PVC shoes (along with screw) |
| 44 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 45 | TABLE 3X2 WITH DWR: FD-283The following repairs shall carried out to Table 3x2 with drawer after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:- |
| 46 | Top made out of 18mm thick pre-laminated MDF board (size 900mmx600mm) exterior grade with matching teakwood edging all around of color & texture as approved by GE. |
| 47 | Leg (30mmx60mm of 760mm long) |
| 48 | Long Rail (20mmx60mm of 780mm long) |
| 49 | Short Rail (20mmx600mm of 540mm long) |
| 50 | Centre stiffener (20mmx50mm of 540 long) |
| 51 | Drawer (as per drg) |
| 52 | Rubber/PVC shoes (along with screw) |
| 53 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 54 | TABLE DINNING FOR 06 PERSONS:FD-239,273 & FD/MAP-II/03Repair to table dining of 06 persons including dismantling/removal of all broken parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by engr-in-charge:- |
| 55 | Top made out of 18mm thick pre-laminated MDF board (size 1500mmx900mm) exterior grade with teakwood edging all around of color & texture as approved by GE. |
| 56 | Leg (90mmx45mm of 750mm long) |
| 57 | Long Rail (45mmx90mm of 1320mm long) |
| 58 | Short Rail (45mmx90mm of 810mm long) |
| 59 | Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw. |
| 60 | Stiffener (90mmx25mm of 810mm long) |
| 61 | Rubber/PVC shoes (along with screw) |
| 62 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 63 | TABLE DINNING FOR 08 PERSONS: FD-239,273 & FD/MAP-II/03Repair to table dining of 08 persons including dismantling/removal of all broken parts and replacing with new parts of well-seasoned teak wood as under all as directed by Engr-in-Charge:- |
| 64 | Top made out of 18mm thick pre-laminated MDF board (size 1800mmx900mm) exterior grade with matching teakwood edging all around of color & texture as approved by GE. |
| 65 | Leg (90mmx45mm of 750mm long) |
| 66 | Long Rail (45mmx90mm of 1320mm long) |
| 67 | Short Rail (45mmx90mm of 810mm long) |
| 68 | Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw. |
| 69 | Stiffener (90mmx25mm of 810mm long) |
| 70 | Rubber/PVC shoes (along with screw) |
| 71 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 72 | TABLE DINNING 4 PERSON: FD/MAP-II/03Repair to table dining including dismantling/removal of all broken parts and replacing with new parts of well-seasoned teak wood as under all as directed by Engr-in-Charge:- |
| 73 | Top made out of 18mm thick pre-laminated MDF board (size 1200mmx900mm) exterior grade with matching teakwood edging all around of color & texture as approved by GE. |
| 74 | Leg (90mmx45mm of 750mm long) |
| 75 | Rail (45mmx90mm of 810mm long) |
| 76 | Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw. |
| 77 | Rubber/PVC shoes (along with screw) |
| 78 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 79 | BED PLY TOP : FD- 264Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and providing new components of 1st grade BWR Teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact complete all as specified, shown on drg or as directed by Engr-in-Charge: |
| 80 | Headrest with Legs (25mmx100mm teak wood plank as per drg) |
| 81 | Footrest with Legs (25mmx100mm teak wood plank as per drg) |
| 82 | Centre Stiffener (30mmx20mm of 910mm long) |
| 83 | Long Rail (50mmx100mm of 2000mm long) |
| 84 | Short Rail (50mmx100mm of 910mm long) |
| 85 | Top made 12mm thick plywood commercial type BWR (1974mmx824mm) comforming to IS:303. |
| 86 | Scrapping off the entire existing polish of the wooden members with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge. |
| 87 | SIDE BOARD : FD-26,371 & 372Repairing the item including dismantling/removal of all broken parts and replacing with new parts of 18mm thick prelaminated MDF board exterior grade in shade & texture as approved by Engr-in-Charge as under:- |
| 88 | Side (18mm thick Prelaminated MDF board of 445mmx635mm) |
| 89 | Back (18mm thick Prelaminated MDF board of 445mmx1220mm) |
| 90 | Shelves (12mm thick Prelaminated MDF Board 883mmx426mm) |
| 91 | Drawer (as per drg) |
| 92 | Door (as per Drg) |
| 93 | Top (18mm thick Prelainated MDF board size of 1220mmx445mm) |
| 94 | Bottom Frame (75mmx75mm teak wood frame as per drg) |
| 95 | Knobs as per approved sample. |
| 96 | Scrapping off the entire existing polish of the wooden members with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge. |
| 97 | CHAIR DINING JCO/OR : FD/MAP/03 & FD/MAP-II/05Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and new components of first class BWR teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. |
| 98 | Back rest (45mmx15mm of 405mm long as per Drg) |
| 99 | Leg stiffener (20mmx25mm 440mm long) |
| 100 | Front legs (30mmx55mm of 460mm Long) |
| 101 | Rear Legs(30mmx55mm of 460mm Long) |
| 102 | Rails (30mmx60mm of 430mm long) |
| 103 | Rubber/PVC shoes (along with screw) |
| 104 | PVC seat 4mm thick with holes & screwed with frame as per drg. |
| 105 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 106 | CHAIR DINING FD-279 :-Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and new components of first class BWR teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. |
| 107 | Back rest (45mmx15mm of 405mm long as per Drg) |
| 108 | Leg stiffener (20mmx25mm 440mm long) |
| 109 | Front legs (30mmx55mm of 460mm Long) |
| 110 | Rear Legs(30mmx55mm of 460mm Long) |
| 111 | Rails (30mmx60mm of 430mm long) |
| 112 | Rubber/PVC shoes (along with screw) |
| 113 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 114 | CHAIR EASY: FD-17 & 229:-Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and new components of first class BWR teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part intact. |
| 115 | Rear legs (leg out of 55mmx25mm of 300mm long as per drg) |
| 116 | Front Legs (leg out of 55mmx25mm of 355mm long as per drg) |
| 117 | Rail (seat) (50mmx25mm of 510mm long) |
| 118 | Rail (Back) (50mmx25mm of 480mm long) |
| 119 | Arms (65mmx25mm of 610mm long) |
| 120 | Rubber/PVC shoes (along with screw) |
| 121 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 122 | CHAIR WRITING:-FD-280,261,20 & 148Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and new components of first class BWR teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. |
| 123 | Back rest stiffeners (50mmx25mm of 470mm long) |
| 124 | Leg Stiffener (25mmx20mm of 530mm long) |
| 125 | Front Legs (55mmx30mm of 660mm long) |
| 126 | Rear Legs (55mmx30mm of 890mm long as per drg) |
| 127 | Rails (30mmx65mm of 535mm long) |
| 128 | Arms (60mmx25mm of 470mm long) |
| 129 | Rubber/PVC shoes (along with screw) |
| 130 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 131 | CHAIR DINING LONG BACK & CHAIR DINING OFFICERS :-FD-357 & FD/E6/MAP/10Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and new components of first class BWR teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact. |
| 132 | Back rest as per drg |
| 133 | Cushioned seat (75mm thick 32 density foam with fabric on seat with 12mm ply & as per drg) |
| 134 | Leg stiffener as per drg |
| 135 | Front legs as per drg |
| 136 | Rear Legs as per drg |
| 137 | Rails as per drg |
| 138 | Rubber/PVC shoes (along with screw) |
| 139 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 140 | STOOL DRESSING CUSHIONED FD-374, FD/E6/MAP/14The following repairs shall carried out to stool dressing cushioned after removing old UNSV parts and replacing with new parts complete all as specified, shown on drg or as directed by Engr-in-Charge : |
| 141 | Cushioned seat (75mm thick 32 density foam with tapestry cloth on seat fixed with 12mm BWR ply & as per drg) |
| 142 | Top rails of first class teakwood as per drg |
| 143 | Bottom stiffener of first class teakwood as per drg |
| 144 | Legs of first class teakwood as per drg |
| 145 | Sides of 18/19mm prelaminated mdf board as per drg |
| 146 | Shelf of 18/19mm prelaminated mdf board as per drg |
| 147 | Rubber/PVC shoes (along with screw) |
| 148 | Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed. |
| 149 | SOFA SET 4/5 SEATER : FD-373, 1113 & 281 Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and providing new components of 1st grade BWR Teak/sheesham/sagwan wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact complete all as specified, shown on drg or as directed by Engr-in-Charge. |
| 150 | Cushion 100 mm thick 40 density covered with tapestry cloth not less than Rs 550 per mtr secured with a concealed high quality zipper for easy removal all as approved, specified & as directed by Engr-in-Charge. |
| 151 | Arms (75mmx35mm of 725mm long) |
| 152 | Legs (75mmx35mm of 300mm high) |
| 153 | Batten as per drg |
| 154 | Bearer as per drg |
| 155 | Rubber/PVC shoes (along with screw) |
| 156 | Scrapping off the entire existing polish of the wooden members of sofa set 4 seater with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge. |
| 157 | Scrapping off the entire existing polish of the wooden members of sofa set 5 seater with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge. |
| 158 | ALMIRAH MESS UTENSIL : FD-93Repairing the item including dismantling/removal of all broken parts and replacing with new parts of 18mm thick prelaminated MDF board exterior grade in shade & texture as approved by Engr-in-Charge as under:- |
| 159 | Back (1670mmx1065mm 12mm th plwood) |
| 160 | Door as per drg |
| 161 | Shelves (18mm thick MDF board 405mmx380mm) |
| 162 | Top as per drg |
| 163 | Bottom Frame as per drg |
| 164 | Knobs as per approved sample. |
| 165 | Scrapping off the entire existing polish of the wooden members with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge. |
| 166 | TABLE DRESSING GENTS : FD-230 & 379Repairing the item including dismantling/removal of all broken parts and replacing with new parts of 18mm thick prelaminated MDF board exterior grade in shade & texture as approved by Engr-in-Charge as under:- |
| 167 | Complete box including drawers made up of 12mm thick prelmainated MDF Board |
| 168 | Looking glass with 6mm thick commercial plywood back & TW frame duly polished |
| 169 | Knobs as per approved sample. |
| 170 | I' hook for hanging table made out of 3mm thick FI. |
| 171 | HAT STAND WITH MIRROR: FD-362Repairing the item including dismantling/removal of all broken parts and replacing with new parts of 18mm thick prelaminated MDF board exterior grade in shade & texture as approved by Engr-in-Charge as under:- |
| 172 | S&F of Looking mirror 300mmx440mmx5.5mm TH as per drg. |
| 173 | Copper oxidised Pegs |
| 174 | I' hook for hanging table made out of 3mm thick FI. |
| 175 | Scrapping off the entire existing polish of the wooden members with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge. |
| 176 | RECANNING TO VARIOUS TYPES OF WOODEN CHAIRS/STOOLSRemoving the existing unserviceable cane plastic from the chair and recaning the following chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide, white/yellow color. The caning shall be done only after repairing & polishing as stated above complete all as specified & directed by Engr-in-Charge:- |
| 177 | Chair Dining : FD-279,262,228,16(M),1105. |
| 178 | Chair Writing : FD-20(M) ,261,280,250,1107. |
| 179 | Chair Easy : FD-229,17,358. |
| 180 | Stool Dressing CB : FD-27,252,282. |
| 181 | TABLE BED SIDE (FD-276/FD-248)Repairing the item including dismantling/removal of all broken parts and replacing with new parts as approved by Engr-in-Charge as under:- |
| 182 | Removing of old unsv Side from Table bed side. Supply with 18mm thick MDF board with both side laminated as approved colour by GE/Engr-in-charge and fixing it properly as shown on drawing. The edge of the board shall be binding with 6mm thick teakwood beading |
| 183 | Removing of old unsv back from Table bed side. Supply with 06mm thick BWR plywood board and fixing it properly as shown on drawing. The back of the Bed side board shall be polished with matching of the Board. |
| 184 | TABLE DRESSING LADIES WITH MIRROR: FD/MAP-II/07 &FD-378Repairing the item including dismantling/removal of all broken parts and replacing with new parts as approved by Engr-in-Charge as under:- |
| 185 | Removing of old unsv Side from Table dressing ladies. Supply with 18mm thick MDF board with both side laminated as approved colour by GE/Engr-in-charge & matching with the parts clour and fixing it properly as shown on drawing. The edge of the board shall be binding with 6mm thick teakwood beading. |
| 186 | Drawer as shown on drawing |
| 187 | Fancy knobs/CP handles as approved by GE/Engr-in-charge |
| 188 | Stool Cushion 75 mm thick 40 density covered with tapestry cloth secured with a concealed high quality zipper for easy removal all as approved, specified & as directed by Engr-in-Charge. |
| 189 | Castor wheels 50mm dia |
| 190 | Removing of broken unsv & S & F of 5.5mm looking mirror with frame as shown on drg. |
| 191 | Scrapping off the entire existing polish of the wooden members with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge. |
| 192 | DRESSING MIRROR GENTS : FD/E6/MAP/16Repairing the item including dismantling/removal of all broken parts and replacing with new parts as approved by Engr-in-Charge as under:- |
| 193 | Removing of old unsv Side from dressing mirror gents. Supply with 18mm thick MDF board with both side laminated as approved colour by GE/Engr-in-charge & matching with the parts colour and fixing it properly as shown on drawing. The edge of the board shall be binding with 6mm thick teakwood beading. |
| 194 | Removing of old unsv ply from back of dressing mirror gents and Supply & fixing with 12mm thick phenol bonded ply |
| 195 | Removing of old unsv & S & F Teakwood legs as shown on drg. |
| 196 | Removing of broken unsv & S & F Movable glass shelves supported on runner/glass holder as shown on drawing |
| 197 | Removing of broken unsv & S & F 5.5mm looking mirror with frame as shown on drg. |
| 198 | Scrapping off the entire existing polish of the wooden members with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge. |
| 199 | PEG TABLE/CENTER TABLE MODULAR UNIT : FD-1114Removing of old unsv & S & F of new Top, side and back of 18mm/19MM thick prelaminated MDF board with teakwood edging duly polished |
| 200 | TABLE DINING OR'S STEEL (FD-165)Repair to table dining OR's including replacement of UNSV existing top with 18/19mm thick block board with 22 gauge aluminium sheet (1975mmx750mm) on top of Board to be properly fix. Required welding work on the steel frame structure as per Engr-in-charge direction and the Steel frame of the table shall be painted with synthetic enameled paint BLACK colour after properly smoothening the surface with sand paper complete all as directed by the Engineer-in-Charge. |
| 201 | ALMIRAH LARGE STEEL (FD-1031,FD/E6/MAP/18) |
| 202 | Removing unsv & S & F shelves with appropriate nuts bolts all as specified and directed by Engineer-in-Charge. |
| 203 | Removing unsv & S & F locks , 6 levers Godrej pattern of steel with duplicate key & hole cover.The keys & lock shall have embedded similar numbers for identification. |
| 204 | Removing unsv & S & F steel anodized handles 4” grip as per sample. |
| 205 | Removing unsv & S & F locking assembly with cover duly painted. |
| 206 | Removing unsv & S & F legs duly painted. |
| 207 | M & L for denting & painting Almirah both internally and externally with synthetic enameled paint of OG/Smoke grey colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 208 | ALMIRAH MEDIUM STEEL (FD-1032, FD-114) |
| 209 | Removing unsv & S & F shelves replacing the old unsv with appropriate nuts bolts all as specified and directed by Engineer-in-Charge. |
| 210 | Removing unsv & S & F of locks 6 levers Godrej pattern of steel with duplicate key & hole cover.The keys & lock shall have embedded similar numbers for identification. |
| 211 | Removing unsv & S & F steel anodized handles 4” grip as per sample. |
| 212 | Removing unsv & S & F locking assembly with cover duly painted. |
| 213 | Removing unsv & S & F legs duly painted. |
| 214 | M & L for denting & painting the Almirah both internally and externally with synthetic enameled paint of OG/Smoke grey with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 215 | BOOK CASE STEEL GLAZED (FD-1028) |
| 216 | Removing unsv & S & F shelves & shutters with appropriate nuts bolts all as specified and directed by Engineer-in-Charge. |
| 217 | Removing unsv & S & F locks with duplicate key. |
| 218 | Removing unsv & S & F steel anodized handles as per sample. |
| 219 | Removing unsv & S & F glass of the shutters and smoothening the movement thereof. |
| 220 | M & L for denting & painting book case both internally and externally with synthetic enameled paint of GREY/OG colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 221 | LOCKER BEDSIDE STEEL (FD-257) |
| 222 | M & L for Denting & painting of locker with synthetic enamel paint of OG/Smoke grey colour after preperation of surface by cleaning & smoothening with electric grinder & applying putty/primer where necessary complete all as specified/shown on drg & directed by Engr-in-Charge. |
| 223 | Removing and replacing unsv & S & F hasp & staples 75mm long as per drg. |
| 224 | Removing unsv & S & F MS steel CP handles 100mm long as per drg. |
| 225 | S & F CP steel conduit 19/20mm dia hanging rod with brackets16 guage as per drg. |
| 226 | Removing unsv & S & F legs duly painted. |
| 227 | CHAIR COMPUTER,CHAIR REVOLVING EXECUTIVE(HIGH/LOW BACK),CHAIR REVOLVING WITH & W/O ARMS (GODREJ, ROYALZ, FD/E6/MAP/01) |
| 228 | Removing unsv & S & F seat & back of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & color.All as directed by Engr-in-Charge. |
| 229 | Removing unsv & S & F castor wheels as per the approved sample |
| 230 | Removing unsv & S & F handrest matching the previous all in shape,size,material & quality. |
| 231 | S & F pedestal assembly all matching the shape,size & quality of the previous. |
| 232 | Removing unsv & M & L for servicing synchro tilting mechanism. |
| 233 | M & L for servicing the gas lift mechanism & making the seat adjustment functional. |
| 234 | TABLE OFFICE OFFR STEEL (FD-1003 & 84) |
| 235 | Repair to table office offr steel by replacing top of pre-lminated MDF board 18mm thick exterior grade as approved with both sides lamination with matching teakwood edging all around. Drawers & cupboard shall be repaired for smooth functioning. All steel sufaces of table shall be painted with two coats of synthetic enamel paint of existing shade with spray gun after properly smoothening the surface with sand paper & applying primer where necessary. Hard rubber shoes shall be provided for legs complete all as directed by Engr-in-Charge. |
| 236 | Removing unsv & S & F new drawers on the right side of table |
| 237 | Removing unsv & S & F of new locks |
| 238 | TABLE OFFICE CLK STEEL (FD-1004 & 84) |
| 239 | Repair to table office clerk steel by replacing top of pre-lminated MDF board 18mm thick exterior grade as approved with both sides lamination with teakwood edging all around. All steel surfaces of table shall be painted with two coats of synthetic enamel paint of existing shade with spray gun after properly smoothening the surface with sand paper & applying primer where necessary. Hard rubber shoes shall be provided for legs complete all as directed by Engr-in-Charge. |
| 240 | Removing unsv & S & F new drawers on the right side of table |
| 241 | Removing unsv & S & F new locks |
| 242 | CHAIR VERANDAH (FD-333,256) |
| 243 | Removing unsv & M & L for recanning the chair with plastic cane 3.5mm to 4mm wide, 0.4 mm thick half round, white/black colour, (MAT Pattern) complete all as specified & directed.Canning shall be done only after painting. |
| 244 | M & L for painting the frame of the chairs by one coat of synthetic enamel white of approved quality over a coat of primer after scrapping off the existing worn out paint with an electric grinder complete all as specified & directed. |
| 245 | Removing unsv & Supply and Fixing PVC shoes . |
| 246 | CHARPOY IP HARD TOP (FD/MAP-II/01) |
| 247 | Removing old UNSV plywood top and S & F of new top made out of 12 mm thick plywood board commercial grade conforming to IS:303 |
| 248 | Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes |
| 249 | Scratching the entire steel frame ,filling putty & scratching it with an electric grinder to smoothen the uneven surface & spray painting it in OG/smoke grey color complete all as specified and as directed. |
| 250 | TABLE 3'X2' WITH DRAWER STEEL (FD-1008) |
| 251 | Removing unsv & S & F top having pre-lminated MDF board 18mm thick exterior grade in shade as approved by GE both side lamination with halfround teakwood edging matching the color of the top. |
| 252 | Removing unsv & S & F new drawers & cabinet all as per drawing. |
| 253 | M & L for painting all over the steel structure with synthetic enameled paint of OG/smoke grey colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 254 | Removing unsv & S & F hard rubber shoes to legs |
| 255 | TABLE 3'X2' WITHOUT DRAWER STEEL (FD-1007) |
| 256 | S & F top of pre-lminated MDF board 18mm thick exterior grade in shade as approved, both side lamination with HALF ROUND teakwood edging matching the color of the top. |
| 257 | M & L for painting all over the steel structure with synthetic enameled paint of OG/smoke grey colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. |
| 258 | S & F hard rubber shoes to legs. |
| 259 | CHAIR WRITING, CHAIR VISITORS (FD/E6/MAP/12, GODREJ, ROYALZ)Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the chair as approved, shown on drawing & as directed by Engr-in-Charge :- |
| 260 | Seat & back of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & color complete all as directed by Engr-in-Charge. |
| 261 | Handrest to match with existing all in shape, size, material & quality. |
| 262 | Rubber stoppers. |
| 263 | TABLE 900X900mm (FD-1009)Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the Table Dining ORs as approved, shown on drawing & as directed by Engr-in-Charge :- |
| 264 | Top of PRELAMINATED MDF board 18/19mm thick with matching teakwood edging in shade as approved covering both the faces. |
| 265 | Material & labour for painting all over the steel structure with synthetic enameled paint of BLACK/BROWN colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge. |
| 266 | Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes |
| 267 | TEAPOY VERANDHA/TEAPOY VERANDHA MAP STEEL (FD/E6/MAP/17)Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the Table Dining ORs as approved, shown on drawing & as directed by Engr-in-Charge :- |
| 268 | Top of PRELAMINATED MDF board 18/19mm thick with matching teakwood edging in shade as approved covering both the faces. |
| 269 | Material & labour for painting all over the steel structure with synthetic enameled paint of BLACK/WHITE colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge. |
| 270 | Hard rubber shoes for legs |
| 271 | BED HARD MAP (FD/E6/MAP/08(R) |
| 272 | Removing old UNSV plywood top and S & F of new top made out of 12 mm thick plywood board commercial grade conforming to IS:303 |
| 273 | Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes |
| 274 | Scratching the entire steel frame ,filling putty & scratching it with an electric grinder to smoothen the uneven surface & spray painting it in black color complete all as specified and as directed. |
| 275 | TV TROLLEY (FD/E6/MAP/04)Repairing the item including dismantling/removal of all broken parts and replacing with new parts of 18mm thick prelaminated MDF board exterior grade in shade & texture as approved by Engr-in-Charge as under:- |
| 276 | Shelf |
| 277 | Bottom sheet |
| 278 | Glass shutter with magnetic catcher |
| 279 | Castor wheels |
| 280 | CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05) |
| 281 | Removing of old UNSV blowplastic one piece seat & back and S & F of new blowplastic one piece seat & back |
| 282 | Removing of old UNSV hand rest board and S & F of new hand rest board made out of 18mm thick prelaminated MDF board with teakwood edging including replacing of old unsv 25mm hollow steel pipe with new 25 mm hollow steel pipe inserted in 20mm MS rod welded to frame |
| 283 | Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes |
| 284 | Painting to the steel structure in BLACK color after removing the old wornout paint all as specified by Engr-in-Charge, |
| 285 | CHAIR CBA STEEL WITH HAND REST (FD-120(M) |
| 286 | Removing of old UNSV hand rest board and S & F of new hand rest board made out of 18mm thick prelaminated MDF board with teakwood edging including replacing of old unsv 25mm hollow steel pipe with new 25 mm hollow steel pipe inserted in 20mm MS rod welde |
| 287 | Removing unsv & M & L for recanning seat & back of the chair with plastic cane of white colour, (Godrej Pattern) complete all as specified & directed. Canning shall be done only after polishing/painting. |
| 288 | Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes |
| 289 | M & L for welding wherever reqd & painting of the frame of the chairs with one coat of synthetic enamel paint of approved quality over a coat of primer after scrapping off the existing worn out paint with an electric grinder complete all as specified & directed. |
| 290 | TABLE COMPUTER (FD/E6/MAP/03) |
| 291 | Supply & Fixing of UNSV existing top of table computer with 18mm thick prelaminated MDF/Particle board commercial type both sides laminated duly covered with teakwood edging in color approved by the GE/Engr-in-charge. Steel frame of the table shall be painted with synthetic enameled paint BLACK colour after properly smoothening the surface with sand paper complete all as directed by the Engineer-in-Charge. |
| 292 | Supply & Fixing of UNSV existing bottom of table computer with 18mm thick prelaminated MDF/Particle board commercial type both sides laminated duly covered with teakwood edging in color approved by the GE/Engr-in-charge. Steel frame of the table shall be painted with synthetic enameled paint BLACK colour after properly smoothening the surface with sand paper complete all as directed by the Engineer-in-Charge. |
| 293 | Removing of Keyboard holder and Supply & Fixing of keyboard holder with 18mm thick MDF/Particle board matching with the top of table. |
| 294 | Removing of old unsv telescopic channels and Supply & Fixing of high quality telescopic channels to the mouse pad board/ Key board holder & drawer of the tables. |
| 295 | Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes bush stud type. |
| 296 | Rack shoe steel (FD/E6/MAP/02(R) |
| 297 | Removing of old unsv main frame of 25mm dia MS pipe 18 gauge and Supply & Fixing of main frame of 25mm dia MS pipe 18 gauge |
| 298 | Removing of old unsv jali framework of 19mm dia MS pipe 18 gauge welded to legs and Supply & Fixing of jali framework of 19mm dia MS pipe 18 gauge welded to legs |
| 299 | Removing of old unsv 3mm dia MS rods of 18 gauge and Supply & Fixing of 3mm dia MS rods of 18 gauge |
| 300 | Removing of old unsv 20m dia MS pipe of 18 gauge welded to legs and Supply & Fixing of 20m dia MS pipe of 18 gauge welded to legs |
| 301 | M & L for welding at various broken points complete all as specified & directed by Engr-in-charge. |
| 302 | Table bedside steel (FD/E6/MAP/15(R) |
| 303 | Removing of old unsv top/sides from Table bed side. Supply with 18mm thick MDF/Particle board with both side laminated with teakwood edging as approved colour by GE/Engr-in-charge and fixing it properly as shown on drawing. |
| 304 | Removing of old unsv ply from back of Table bed side. Supply with 06mm thick BWR ply and fixing it properly as shown on drawing. |
| 305 | Removing unsv drawers and S & F with 18mm thick MDF/Particle board with both side laminated with teakwood edging as per approved colour by GE/Engr-in-charge and fixing it properly as shown on drawing. |
| 306 | Removing unsv CP handles and S & F new CP handles all as directed by Engr-in-charge. |
| 307 | Removing of old unsv telescopic channels and Supply & Fixing with high quality telescopic channels to the drawer of the table |
| 308 | Removing unsv hardwood stopper and S & F new hardwood stopper all as directed by Engr-in-charge. |
| 309 | Removing of old unsv 18mm thick MS square pipe of 18 gauge and Supply & Fixing with 18mm thick MS square pipe of 18 gauge to the framework of the table |
| 310 | M & L for welding at various broken points complete all as specified & directed by Engr-in-charge. |
| 311 | Painting to the MS pipe with BLACK paint after removing the old wornout paint all as specified by Engr-in-Charge, |
| 312 | TRESTLE STORE ROOM STEEL (FD-86/ FD-1043)M&L for required welding work on the steel frame structure as per Engr-in-charge direction and the Steel frame of the TRESTLE STORE ROOM shall be painted with synthetic enameled paint with two coats of Black colour after properly smoothening the surface with help of electric grinder complete all as directed by the Engineer-in-Charge. |
| 313 | RACK ADJUSTABLE STEEL 3 TIER (FD-1039)M&L for required welding work on the steel frame structure as per Engr-in-charge direction and the Steel frame of the RACK ADJUSTABLE STEEL 3 TIER shall be painted with synthetic enameled paint with two coats of OG/Black colour after properly smoothening the surface with help of electric grinder complete all as directed by the Engineer-in-Charge. |
| 314 | RACK ADJUSTABLE STEEL 6 TIER (FD-1038)M&L for required welding work on the steel frame structure as per Engr-in-charge direction and the Steel frame of the RACK ADJUSTABLE STEEL 6 TIER shall be painted with synthetic enameled paint with two coats of OG/Black colour after properly smoothening the surface with help of electric grinder complete all as directed by the Engineer-in-Charge. |
| 315 | CHARPOY GI PIPE WITH HARDTOP(PLYWOOD) (FD-220) |
| 316 | Removing old unserviceable plywood from charpoy GI pipe & supplying & fixing 12mm thick plywood BOILING WATER RESISTANT IS: 303 ,of size 1980x900mm to GI pipe frame & fixing it with nut bolt and washers of size 62-65mm and 6mm dia & tightening the complete frame.Rest all as directed by Engr-in-Charge . |
| 317 | Removing old unserviceable nylon newar from charpoy GI pipe & supplying & fixing 12mm thick plywood BWR IS: 303 of size 1980x900mm to GI pipe frame by drilling 16 Nos holes(03 Nos on each long rail & 2 Nos on each Short rail & 2 nos on each iron flat) & fixing it with nut bolt and washers of size 62-65mm and 6mm dia & tightening the complete frame.Rest all as directed by Engr-in-Charge. |
| 318 | M & L for black painted flat Iron of size 40mm x 5/6mm length equal to width of GI charpoy to be fixed tightly to GI Chapoy with the help of nut,bolt & washer of size 62-65 mm & 6 mm dia |
| 319 | Removing old unserviceable three way elbow from GI pipe & S & F new three way elbow GI 32mm bore/dia ISI marked,complete all as specified/ shown on drg and as directed by Engr-in-Charge. |
| 320 | Removing old unserviceable GI check nut from the frame & S & F new GI check nut 32mm bore/dia & 10mm wide as specified/shown on drawing and as directed. |
| 321 | Removing old broken end long rail from charpoy and S & F new long rails of GI pipe ISI marked,32mm dia medium grade duly threaded upto 22mm on both ends to be fitted to the frame complete all as specified & shown on drg or as directed. |
| 322 | Removing old broken end short rails from charpoy and replacing with new short rails of GI pipe made out of long rails retrieved from unserviceable long rails here-in-before duly threaded at both ends upto 22mm to be fitted to the frame complete all as shown on drg or as directed. |
| 323 | Removing old broken end legs from charpoy GI and replacing with new legs of GI pipe made out of short rail retrieved from unserviceable short rails here-in-before, duly threaded at one end to be fitted to the frame.The lower end of the leg shall be provided with hard rubber shoe/hard rubber sheet of thickness 5mm duly covering the hole for scratch free movement irrespective of what is shown on drg .Rest all as shown on drg and as directed. |
| 324 | DESK WITH MS FRAME MODEL-2 (CEPZ/FD-01/07) |
| 325 | Repair to Desk MS Frame Model-2 with removing of old unserviceable MDF/Particle board from Top of the desk, Back rest of sittting bench & all the sides of desk and replacing with 18/19mm thick prelaminated MDF board fix properly with screws/bolt nuts as shown in drg & as directed by Engr-in-charge. All prelaminated MDF board edges shall be covered with 6mm thick teakwood beading and should be polished with matching Prelaminated MDF board colour. All as shown in drg and as directed by Engr-in-charge |
| 326 | Removing of old unserviceable wooden plank seat with MS frame and supply & fixing of 40mm thick wooden plank seat with MS sq frame as shown in drg and as directed by Engr-in-charge. The wooden plank seat shall be painted with synthetic enamel paint matching with MDF board as directed by Engr-in-charge. |
| 327 | M&L for welding of FI 3mm th & 5mm length plate at the broken welding joint on the steel frame structure as per Engr-in-charge direction and the Steel frame of the desk shall be painted with synthetic enameled paint with Black/Grey colour with spray gun after properly smoothening the surface with help of electric grinder complete all as directed by the Engineer-in-Charge. |
| 328 | Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes and top end shall be covered with PVC cap. |
| 329 | DESK WITH MS FRAME MODEL-3 (CEPZ/FD-01/07) |
| 330 | Repair to Desk MS Frame Model-3 with removing of old unserviceable MDF/Particle board from Top of the desk, Back rest of sittting bench & all the sides of desk and replacing with 18/19mm thick prelaminated MDF board fix properly with screws/bolt nuts as shown in drg & as directed by Engr-in-charge. All prelaminated MDF board edges shall be covered with 6mm thick teakwood beading and should be polished with matching Prelaminated MDF board colour. All as shown in drg and as directed by Engr-in-charge |
| 331 | Removing of old unserviceable wooden plank seat with MS frame and supply & fixing of 40mm thick wooden plank seat with MS sq frame as shown in drg and as directed by Engr-in-charge. The wooden plank seat shall be painted with synthetic enamel paint matching with MDF board as directed by Engr-in-charge. |
| 332 | M&L for welding of FI 3mm th & 5mm length plate at the broken welding joint on the steel frame structure as per Engr-in-charge direction and the Steel frame of the desk shall be painted with synthetic enameled paint with Black/Grey colour with spray gun after properly smoothening the surface with help of electric grinder complete all as directed by the Engineer-in-Charge. |
| 333 | Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes and top end shall be covered with PVC cap. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender