Tender For Augmentation Of Water Supply System & Allied Works For 23 repair renovation (Rajput) And 123 Inf Bn (Ta) Grenadiers At Maitra C Under Age (I) Bhalra (Nit No. 36 Of 2026-27)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Jul 2026
12 days left
EMD
19398
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagrota → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Augmentation Of Water Supply System & Allied Works For 23 repair renovation (Rajput) And 123 Inf Bn (Ta) Grenadiers At Maitra C Under Age (I) Bhalra (Nit No. 36 Of 2026-27)
BOQ
| Sl. No. | Item Description |
| 1 | Supply, install, testing and commissioning 25 HP Centrifugal pump along with electric driven motor , 415 volt 3 phase AC, TP having head range 70 ,meter, flow rate min 600 LPM, rated speed 2935 RM complete all as speciified and directed. |
| 2 | Supply, install, testing and commissioning 20 HP Centrifugal pump along with electric driven motor , 415 volt 3 phase AC, TP having head range 70 ,meter, flow rate min 500 LPM, rated speed 2935 RM complete all as speciified and directed. |
| 3 | Supply, installation, connecting, testing and commissioning of chlorine Dosing system comprising of preparation tank made out of FRP with capacity 100 ltrs with water inlet line, Outlet point with stainer, Drain plug, Overflow option, with level gauge, Agitator comprising of flange mounted electric motor of appropriate capacity with plastic shaft and impeller, and service tank of net capacity 100 ltrs with water inlet line, Dosing pump inlet arrangement, Drain and overflow option, level gauge and inspection port and Agitator with flange mounted electric motor of appropriate capacity and dosing pump High pressure single head adjustable pressure upto 5 Kg /sqcm. Power input 230 v, 50 HZ, with fractional Horsepower motor suitable for output of upto 10 ltr/ hr with mandatory accessories like lead tubing, connecting ferrules, check valve, etc complete upto chlorine feeding point to chlorination plant including all the accessories required for proper functioning of dosing system complete all as specified and directed. |
| 4 | M & L for Tubes, ‘medium grade’, galvanised, with all fitting; laid in trenches of bore dia 50mm complete all as specified and as directed by Engr-in-Charge. |
| 5 | M & L for GI Tubes, ‘medium grade’, galvanised, with all fitting; laid in trenches of bore dia 80mm complete all as specified and as directed by Engr-in-Charge. |
| 6 | S & F for Gun metal gate valve with iron wheel head, screwed down iron pipe of 50 mm bore all as specified and directed. |
| 7 | S & F for Gun metal gate valve with iron wheel head, screwed down iron pipe of 80 mm bore all as specified and directed. |
| 8 | S & F for 80 mm dia CI sluice valve of class PN 1.6 both side flanged with SS spindle incl accessories all as specified and directed. |
| 9 | S & F for 50 mm dia CI sluice valve of class PN 1.6 both side flanged with SS spindle incl accessories all as specified and directed. |
| 10 | Supply and fix Valve, reflux, with by-pass arrangement, 50 mm (2”) dia complete all as specified and as directed. |
| 11 | Supply and fix Valve, reflux, with by-pass arrangement, 80 mm (3”) dia complete all as specified and as directed. |
| 12 | Supply and fixing in replacement of Cast Iron Foot Valve, conforming to IS-4038, complete suitable for pipes of following sizes complete i all as specified and directed :-Make : KIRLOSKAR / BIR / BIV / L&T / KARTAR / LEADER / ZOLOTO (a) 80 mm bore |
| 13 | (b) 50 mm bore |
| 14 | Supply and fixing GI Union of Havey grade with and including jointing meterial complete all as specified and directed of following sizes :- Make : Make : Jindal / TATA / Prakash Tubes (a) 50 mm bore |
| 15 | (b) 80 mm bore |
| 16 | Supply and fixing GI socket of Heavy grade with and including jointing meterial complete all as specified and directed of following sizes :- Make : Make : Jindal / TATA / Prakash Tubes (a) 50 mm bore |
| 17 | (a) 80 mm bore |
| 18 | Supply, installation, testing and commissioning of LT Feeder Pillar outdoor type confirming of IS / IEC 61439-I: 2011& IS / IEC 61439 -2: 2011 ) , totally enclosed vermin proof suitably ventilated for 3 phase, 4 wire 415 Volts, 50Hz, AC supply, outer sheel shall be made out of 3.15 mm thick CRCA sheet & MS angle section of suitable size for frame, factory fabricated, compartmentalized inner shell shall be made of out of 2.0 mm thick CRCA sheet for control gear. Front and back door operating with locking arrangement at front. Panel shall be provided with proper ventilation arrangement from both sides including ventilation fan etc.Protection of enclosure IP-66 with pre-treatment through 7 tank hot chemical process prior to powder coated powder coated with pre-treatment through 7 tank hot chemical process prior to powder coated with minimum 50-70 micron with pure polyester siemens grey structural RAL 7035 shade. The bottom of outer shell contains a detachable plate having provision for armoured cable entry with adequate size detachable glands. Computer cut self adhesive vinyl danger notice plate having conventional symbol of bones and skull to be provided.The panel shall be provided with manufacturer name plate,heavy duty SS cable glands of adequate size for incoming and outgoing cables. EPDM gasket of appropriate shape and size provided at all joints, door and covers including suitable size angle iron/flat iron frame work/support required with four legs 60cm long using angle iron 40x40x6mm duly painted with anti corrosive paint, air passing holes and locking arrangement at front with duplicate keys and making connection of incoming and outgoing cable using proper cable lugs and making good distrubed surface incl taking down old one complete and comprising of the following: |
| 19 | (A) Bus Bar (i) TPN Copper electrolytic grade high conductivity bus bar of rating not less than the 250 Amps and shall be insulated with colour coded heat shrinkable sleeves and mounted on suitable size F class insulators made of non hygroscopic , non combustable, track resistant, high strength FRP/MC/DMC material at an interval not more than 500mm through out the length of busbar along with extension and interconnected busbar.The extension link shall not be less than 300mm long supported on suitable size F class insulators for termination of incoming and outgoing cables.All control wires shall be with 2.5sqmm FRLS multi stranded copper conductor and shall be properly bunched , tied,ferruled for proper identification and crimped with adequate size of lugs.B. INCOMER (i) MCCB Cap 160 Amp, 4 pole, 415V, 50 c/s , 25 KA, lcs =100% lcu, thermal magnetic release, adjustable overload 80-100% of nominal current and adjustable short ckt 5 to 10 ln setting complete with phase seperator - 01 nos (C) OUTGOING: (a) MCCB Cap 100 Amp, 4 pole, 415V, 50 c/s confirming to IS:13947(Part-3) 1993, 16 KA, lcs =100% lcu, thermal magnetic release, adjustable overload 80-100% of nominal current and adjustable short ckt 5 to 10 ln setting complete with phase seperator - 02 nos (b) MCB TPN capacity 40 Amps, 415V, 50 c/s confirming to IS:13947(Part-3) 1993, 10 KA - 02 No. (c) MCB SPN capacity 32 amp, 'C' series-01 Nos (D) Star -Delta(Automatic) starter suitable upto 25 HP motor 3 Phase, 415 volts 50 c/.s for induction motor pump including motor protection relay along with contactors,timer against over voltage,under voltage, over current , under current,reverse phasing , single phasing , earth fault etc protetion relays -02 Nos (D)METERING & MISC: (i) Digital multifunction meter (V,A,KW,KWH), 415 AC alongwith C.T's of suitable ratio (set of three), class 1.0, complete (ii) Indication lamps LED type (RYB) =01 set of three |
| 20 | (E).Platform for feeder pillar/LT Panel shall be of suitable size as directed 200mm height above ground level, the foundation shall be using PCC 1:2:4 type B1,15cm thick, brick (sub class B) work in CM 1:6, rendering in CM 1:6 on exposed surfaces and 100mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in padding on top and grouting legs of panel.Note: (i) LT panel board should be as per IS / IEC 61439-I: 2011& IS / IEC 61439 -2: 2011 ) (ii) Contractor shall submit type Test report of LT Panel issued by Approved agency (iii) Drawing of panel shall be got approved from AGE. (iv) Length of bus bar shall not be less than 60 cms. Please Enable Macros to View BoQ information |
| 21 | (E).Platform for feeder pillar/LT Panel shall be of suitable size as directed 200mm height above ground level, the foundation shall be using PCC 1:2:4 type B1,15cm thick, brick (sub class B) work in CM 1:6, rendering in CM 1:6 on exposed surfaces and 100mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in padding on top and grouting legs of panel.Note: (i) LT panel board should be as per IS / IEC 61439-I: 2011& IS / IEC 61439 -2: 2011 ) (ii) Contractor shall submit type Test report of LT Panel issued by Approved agency (iii) Drawing of panel shall be got approved from AGE. (iv) Length of bus bar shall not be less than 60 cms. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender