Tender For Provn Of False Ceiling Tile Flooring Alminium Joineries Partition At Bldg No. T 9 Flooring Area In Front Of Accts Faculty Upvc Door And Alluminium Partition At Airmen Mess And Bar At Afac Coimbatore
Tender Value
7.50 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
18 days left
EMD
15000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of False Ceiling Tile Flooring Alminium Joineries Partition At Bldg No. T 9 Flooring Area In Front Of Accts Faculty Upvc Door And Alluminium Partition At Airmen Mess And Bar At Afac Coimbatore
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing of aluminium three track sliding window consisting of standard section of weight more than 3.5kg/rm for frames and more than 0.55kg/rm for shutters section, with 02 glazed shutters of 5mm tk sheet/ pin float glass & 01 no FRP mesh fly proof shutter with necessary handles, roller wheels, locks, rubber beading, necessary packing material etc complete fixed to wall and floor surfaces with cleats, screws etc including necessary joining clips, rubber packing, snap beading, screws etc complete all as specified of appropriate make as described by Engr in charge.Note : The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass drain through the inner chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. All the hardware like rollers, handles should be screwed with self tapping screws. The handles, locks should not be released from outside. |
| 2 | M&Lpreliminated particle board 12 mm thick interior grade , preliminated both side lamination fixed with screw or cleats or beadings to aluminium frames/ MS frames. |
| 3 | S & F sheet glass, ordinary quality, in squares exc 0.5 sqm each pane of 4.8 mm thickness all as specified and directed |
| 4 | S & F powder coated aluminium frame for doors, window, ventilators/ partitions with one or more rebates including jointing cleats for fixing etc complete all as spefied and directed. |
| 5 | S & F aluminium door shutters, aluminium section weighing 0.55 Kg/m including, necessary jointing, cleats, glazing clips, ruber neoprene packing handles 2 Nos in each door, hinges as specified,stopper anodised aluminium snap beading screws etc complete all as specified |
| 6 | S & F aluminium (extruded section) body door closed hydraulically regulated/ telescopic top/ side hung closer, universal type, suitable for door/ window shutters for any width of doors and of weight exc 80 Kg and fixed all as specied and direcetd. |
| 7 | S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 8 | M & L two coats synthetic enamel paint over priming with red oxide on new steel Surfaces of any description, over 10cm in width or girth,not otherwise described over 10 cm width or girth |
| 9 | Material and labour for providing aluminium powder coated snap grid frame work supported by hanger 6mm dia GI (up to length as per site requirement) for false ceiling, adjusting level fixed to roof slabs/ walls/wooden members by means of ceiling cleats made out of GI flat 40x3 mm size 60 cm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified for false ceiling fixed with screws as per manufactures instructions in flat or slope ceiling. |
| 10 | M & L 15-16mm tk Perforated particle board/ tiles in false ceiling for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with staples on snap grid in flat or sloping ceiling. |
| 11 | M & L for white/coloured Non skid coloured tiles superior finish grade B-1 quality 7 to 8 mm thick(square/ rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floor with rectified edges ( joint free) etc set and jointed in neat cement slury over cement screed 15 mm thick 1:6. |
| 12 | M & L for White/Coloured glazed ceramic tiles economy finish Gde B-II (b) quality of size 600/450 x 300 x 7 mm thick with rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 cm thick backing with cm 1:4. |
| 13 | Taking down cement plaster including racking out joint hacking for key scrubbing down with water etc. |
| 14 | Supply and fix wire netting of SS/ Fibre wire mesh 0.91 mm dia size of mesh 12 mm on wall surfaces to receive plastering fixed with tinned tacks of wire staples all as specified and directed. |
| 15 | Material and labour 15 mm thick cement plaster in CM 1:4 for wall finished even & smooth without using extra cement. |
| 16 | Material and labour Two coats of Oil bound distemper over a coat of alkali resistant primer on walls, pillasters, cornices, etc., on newly plastered walls including preparation of surfaces with 1-3mm wall care putty all as specified and as directed. |
| 17 | Dismantling wall hearth tiling including cement mortar bedding (but not backing) and removing unserviceable material as directed. |
| 18 | M & L for double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.30 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with rectified edges ( joint free) etc set and jointed in neat cement slury over cement screed 15 mm thick 1:6. |
| 19 | M & L for double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.30 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 cm thick backing with cm 1:4. |
| 20 | Removing soil/debris/ building materials etc. to a distance 15km and above, beyond the lead included in the rates, including loading, unloading and stacking at the destination away from the MOD defence land. Note: Dumbing of debris and getting permission from local authorities are complete resposiblity of contractor |
| 21 | Providing and fixing factory made uPVC white colour casement Openable (double leaf/ single leaf) or fixable Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing with selected quality glass complete fixed to wall and floor surfaces with cleats, screws etc including necessary joining clips, rubber packing, snap beading, screws etc complete all as specified of appropriate make as described by Engr in charge. |
| 22 | M&Lpreliminated particle board 12 mm thick interior grade , preliminated both side lamination fixed with screw or cleats or beadings to aluminium frames/ MS frames. |
| 23 | S & F sheet glass, ordinary quality, in squares exc 0.5 sqm each pane of 4.8 mm thickness all as specified and directed |
| 24 | S & F powder coated aluminium frame for doors, window, ventilators/ partitions with one or more rebates including jointing cleats for fixing etc complete all as spefied and directed. |
| 25 | S & F aluminium door shutters, aluminium section weighing 0.55 Kg/m including, necessary jointing, cleats, glazing clips, ruber neoprene packing handles 2 Nos in each door, hinges as specified,stopper anodised aluminium snap beading screws etc complete all as specified |
| 26 | S & F aluminium (extruded section) body door closed hydraulically regulated/ telescopic top/ side hung closer, universal type, suitable for door/ window shutters for any width of doors and of weight exc 80 Kg and fixed all as specied and direcetd. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender