Tender For Repair/ Replacement Of Ci/Di/Gi Pipe Line At Coimbatore And Madukkarai Area Under Ge Wellington 8152/E8
Tender Value
31 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
12 days left
EMD
62000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Replacement Of Ci/Di/Gi Pipe Line At Coimbatore And Madukkarai Area Under Ge Wellington 8152/E8
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exceeding 1.50m deep and not exceeding 1.5m width in soft/ loose soil for taking out / laying of pipe line complete all as specified and as directed. |
| 2 | Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25 cm thick using soils all as specified and directed. |
| 3 | Removing excavated soil (Soft/ loose) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point as in soils all as specified and directed. |
| 4 | Taking out / up / down from trenches /walls /floors of galvanised steel tubings / CPVC connections of bore of pipe 20mm dia complete all as specified and as directed. |
| 5 | Taking out / up / down from trenches /walls /floors of galvanised steel tubings / CPVC connections of bore of pipe 25mm dia complete all as specified and as directed. |
| 6 | Taking out / up / down from trenches /walls /floors of galvanised steel tubings / CPVC connections of bore of pipe 40 /50mm dia complete all as specified and as directed. |
| 7 | Taking out / up / down from trenches /walls /floors of galvanised steel tubings / CPVC connections of bore of pipe 80mm dia complete all as specified and as directed. |
| 8 | Taking out / up / down from trenches /walls /floors of galvanised steel tubings / CPC connections of bore of pipe 100mm dia complete all as specified and as directed. |
| 9 | Taking out / up / down from trenches /walls /floors of galvanised steel tubings / CPVC connections of bore of pipe 15mm dia complete all as specified and as directed. |
| 10 | Supply and laying in trenches, walls, floors galvanised steel tubings medium grade bore size of pipe 20mm dia with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends, tees, reducers, short pieces, unions, caps, plugs etc. including clamps connection cutting screwing , drilling etc upto 100 mm dia pipe all as specified and directed including connections of complete all as specified and directed. |
| 11 | Supply and laying in trenches,walls,floors galvanised steel tubings medium grade bore size of pipe 25mm dia with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc. incl clamps connection cutting screwing , drilling etc upto 100 mm dia pipe all as specified and directed including connections of complete all as specified and directed. |
| 12 | Supply and laying in trenches,walls,floors galvanised steel tubings medium grade bore size of pipe 40mm dia with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc. incl clamps connection cutting screwing , drilling etc upto 100 mm dia pipe all as specified and directed including connections of complete all as specified and directed. |
| 13 | Supply and laying in trenches,walls,floors galvanised steel tubings medium grade bore size of pipe 50mm dia with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc. incl clamps connection cutting screwing , drilling etc upto 100 mm dia pipe all as specified and directed including connections of complete all as specified and directed. |
| 14 | Supply and laying in trenches,walls,floors galvanised steel tubings medium grade bore size of pipe 80mm dia with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc. incl clamps connection cutting screwing , drilling etc upto 100 mm dia pipe all as specified and directed including connections of complete all as specified and directed. |
| 15 | Supply and laying in trenches,walls,floors galvanised steel tubings medium grade bore size of pipe 100mm dia with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc. incl clamps connection cutting screwing , drilling etc upto 100 mm dia pipe all as specified and directed including connections of complete all as specified and directed. |
| 16 | Supply and laying in trenches,walls,floors galvanised steel tubings medium grade bore size of pipe 15mm dia with screwed and socket joints together with all galvanised steel fittings such as sockets, elbows, bends,tees, reducers, short pieces, unions, caps, plugs etc. incl clamps connection cutting screwing , drilling etc upto 100 mm dia pipe all as specified and directed including connections of complete all as specified and directed. |
| 17 | Supply and fix threaded/ Welded MS flange 80mm dia joint for GI pipe with all necessary fittings all as specified and directed. |
| 18 | Supply and fix threaded/ Welded MS flange 50mm dia joint for GI pipe with all necessary fittings all as specified and directed. |
| 19 | Supply and fix threaded/ Welded MS flange 40mm dia joint for GI pipe with all necessary fittings all as specified and directed. |
| 20 | Cutting existing steel tubing 15mm dia for alterations and screwing existing steel tubing with requred acessories (Tee, Nipple and etc) all as specified and directed. |
| 21 | Cutting existing steel tubing 20mm dia for alterations and screwing existing steel tubing with requred acessories (Tee, Nipple and etc) all as specified and directed. |
| 22 | Cutting existing steel tubing 25mm dia for alterations and screwing existing steel tubing with requred acessories (Tee,Nipple and etc) all as specified and directed. |
| 23 | Cutting existing steel tubing 40mm dia for alterations and screwing existing steel tubing with requred acessories (Tee,Nipple and etc) all as specified and directed. |
| 24 | Cutting existing steel tubing 50mm dia for alterations and screwing existing steel tubing with requred acessories (Tee,Nipple and etc) all as specified and directed. |
| 25 | 100 mm DI mechanical joint confirming to relevent latest IS code all as specified and directed. |
| 26 | 150 mm DI mechanical joint confirming to relevent latest IS code all as specified and directed. |
| 27 | 200 mm DI mechanical joint confirming to relevent latest IS code all as specified and directed. |
| 28 | Cutting PCC paving / road etc not exceeding 15cm thick for laying of Pipe all as specified and directed. |
| 29 | PCC 1:2:4 type B-1 using 20mm graded stone aggregate 100mm thick for making good road, finished fair and even all as specified and directed. |
| 30 | Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with spigot and socket ends and joints, connections from the trenches of size of 100mm dia all as specified and directed. |
| 31 | Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with spigot and socket ends and joints, connections from the trenches of size of 150mm dia all as specified and directed. |
| 32 | Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with spigot and socket ends and joints, connections from the trenches of size of 200mm dia all as specified and directed. |
| 33 | Ductile iron pipe 100mm bore dia, spigot and socket ends, including specials class 'K-9\\" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed. |
| 34 | Ductile iron pipe 150mm bore dia, spigot and socket ends, including specials class 'K-9\\" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed. |
| 35 | Ductile iron pipe 200mm bore dia, spigot and socket ends, including specials class 'K-9\\" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed. |
| 36 | Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with flanged ends and joints, connections from the trenches of size of 100mm dia all as specified and directed. |
| 37 | Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with flanged ends and joints, connections from the trenches of size of 150mm dia all as specified and directed. |
| 38 | Dutile iron pipe of 100mm dia bore double end flanged type class K-9 confirming to IS-8329:2000 with cement mortar lining with portable slag cement as per relevent IS code with metallic zinc coating with finishing layer of bituminous coating as per relevant IS including all accessories and fitting specials complette all as specified and directed. |
| 39 | Dutile iron pipe of 150mm dia bore double end flanged type class K-9 confirming to IS-8329:2000 with cement mortar lining with portable slag cement as per relevent IS code with metallic zinc coating with finishing layer of bituminous coating as per relevant IS including all accessories and fitting specials complette all as specified and directed. |
| 40 | Ductile iron specials such as bends, tapers, tee pieces (single and double branch) any type and angle/ radius and straight connecting piece but all ends socketed/ flanged upt 250mm dia bore complete all as specified and directed. Make-Srikalahasthi pipe Ltd, Tata, Electro steel, Tisco, Jindal |
| 41 | Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 100mm dia bore including fixing and testing complete all as specified and directed. Make- Tata, Electro steel, Jindal |
| 42 | Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 150mm dia bore including fixing and testing complete all as specified and directed. Make- Tata, Electro steel, Jindal |
| 43 | Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 200mm dia bore including fixing and testing complete all as specified and directed. Make- Tata, Electro steel, Jindal |
| 44 | Run lead joint for CI/DI spigot and socket pipe line and fittings of size 80mm dia bore all as specified and directed. |
| 45 | Run lead joint for CI/DI spigot and socket pipe line and fittings of size 100mm dia bore all as specified and directed. |
| 46 | Run lead joint for CI/DI spigot and socket pipe line and fittings of size 150mm dia bore all as specified and directed. |
| 47 | Run lead joint for CI/DI spigot and socket pipe line and fittings of size 200mm dia bore all as specified and directed. |
| 48 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls complete including connections of bore size of pipe 20mm dia all as specified and directed.Note: 1. Excavation and earth work will be measured and paid separately.2. Suitable size of Union will be provided at all branches tees joints and at a maximum distance of 30 RM of straight pipe and rates are deemed to be included in the rate quoted above for ease in maintenance. |
| 49 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls complete including connections of bore size of pipe 25mm dia all as specified and directed. Note: 1. Excavation and earth work will be measured and paid separately.2. Suitable size of Union will be provided at all branches tees joints and at a maximum distance of 30 RM of straight pipe and rates are deemed to be included in the rate quoted above for ease in maintenance. |
| 50 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls complete including connections of bore size of pipe 50mm dia all as specified and directed.Note: 1. Excavation and earth work will be measured and paid separately.2. Suitable size of Union will be provided at all branches tees joints and at a maximum distance of 30 RM of straight pipe and rates are deemed to be included in the rate quoted above for ease in maintenance. |
| 51 | Gun metal globe valves with iron wheel head screwed both end for iron pipe of sizes 15mm bore complete all as specified and as directed. |
| 52 | Gun metal globe valves with iron wheel head screwed both end for iron pipe of sizes 20mm bore complete all as specified and as directed. |
| 53 | Gun metal globe valves with iron wheel head screwed both end for iron pipe of sizes 25mm bore complete all as specified and as directed. |
| 54 | Gun metal globe valves with iron wheel head screwed both end for iron pipe of sizes 40mm bore complete all as specified and as directed. |
| 55 | Gun metal globe valves with iron wheel head screwed both end for iron pipe of sizes 50mm bore complete all as specified and as directed. |
| 56 | Gun metal globe valves with iron wheel head screwed both end for iron pipe of sizes bore 100mm dia Non return butterfly valve complete all as specified and as directed. |
| 57 | Supply, fixing and testing sluice valve flanged and drilled both ends CI body, heavy duty, class PN 1:6 gun metal spindle conforming to IS 14846 including jointing with and including rubber gaskets, bolts, nuts, and washers complete and dismantling taking out old unserviceable sluice valve including cutting unscrewing old nut bolts for size 80mm dia complete all as specified and directed. |
| 58 | Supply, fixing and testing sluice valve flanged and drilled both ends CI body, heavy duty, class PN 1:6 gun metal spindle conforming to IS 14846 including jointing with and including rubber gaskets, bolts, nuts, and washers complete and dismantling taking out old unserviceable sluice valve including cutting unscrewing old nut bolts for size 100mm dia complete all as specified and directed. |
| 59 | Supply, fixing and testing sluice valve flanged and drilled both ends CI body, heavy duty, class PN 1:6 gun metal spindle conforming to IS 14846 including jointing with and including rubber gaskets, bolts, nuts, and washers complete and dismantling taking out old unserviceable sluice valve including cutting unscrewing old nut bolts for size 150mm dia complete all as specified and directed. |
| 60 | Supply, fixing and testing sluice valve flanged and drilled both ends CI body, heavy duty, class PN 1:6 gun metal spindle conforming to IS 14846 including jointing with and including rubber gaskets, bolts, nuts, and washers complete and dismantling taking out old unserviceable sluice valve including cutting unscrewing old nut bolts for size 200mm dia complete all as specified and directed. |
| 61 | PVC insulated water proof multi stranded copper conductor cable 3 core 6Sqmm 1100 volts grade ISI marked including disconnecting dismantling taking out old unserviciable cable from LT panel to submersible pump moter set in bore well all as specified and directed. Make: Finolex/ Incab/ Polycab/ Universal. |
| 62 | PVC insulated water proof multi stranded copper conductor cable 3 core 10Sqmm 1100 volts grade ISI marked including disconnecting dismantling taking out old unserviciable cable from LT panel to submersible pump moter set in bore well all as specified and directed.Make: Finolex/ Incab/ Polycab/ Universal. Please Enable Macros to View BoQ information |
| 63 | PVC insulated water proof multi stranded copper conductor cable 3 core 10Sqmm 1100 volts grade ISI marked including disconnecting dismantling taking out old unserviciable cable from LT panel to submersible pump moter set in bore well all as specified and directed.Make: Finolex/ Incab/ Polycab/ Universal. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender