Tender For Repair / Replacement To Joinery, Cupboard And Other Misc Works Under Age Br-Ii Of Ge Sgnr At Mil Stn Sgnr
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jul 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Replacement To Joinery, Cupboard And Other Misc Works Under Age Br-Ii Of Ge Sgnr At Mil Stn Sgnr
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames (without taking off shutters from the frame) exceeding 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed. |
| 3 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of but of Frame size 65x 100 mm/125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 4 | S&F Factory Made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N (Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws and including 125 mm SS hinges with stainless steel screws (03 Nos ), 200 mm long Stainless steel tower bolt (02 Nos) and 300mm long Stainless steel sliding bolt (01/02 Nos) & Stainless steel handles (02 Nos) complete all as per direction of Engineer -In-Charge.Note: -(i) Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/ Bathroom/ Toilet/ Kitchen/ Balcony Doors. |
| 5 | S&F Factory 30 mm thick 100 % solid WPC (Wood Polymer Composite) Laminated Wiremesh shutter of size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: Including 125 mm SS hinges with stainless steel screws (03 Nos ), 200 mm long Stainless steel tower bolt (02 Nos) and 300mm long Stainless steel sliding bolt (01/02 Nos) & Stainless steel handles (02 Nos) |
| 6 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 7 | Factory made single extruded WPC (Wood Polymer Composite) 100 % solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of but of Frame size 75 x 50 mm(moulded) single rebated, made from wood polymer composite (single extruded process) material comprising of virgin PVC polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 780 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be not paid for separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 8 | Factory made single extruded WPC (Wood Polymer Composite) 100% solid plain flush door shutter of 24 mm thick size comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: 125 mm long stainless steel butt hinges (03 nos), 150 mm long aluminium handles (02 Nos) and 150 mm long aluminium tower bolts shall not be paid separately) |
| 9 | Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 122 x 54 mm & sash 47 x 80 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.50 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. |
| 10 | M&L for factory made white colour 3- TRACK UPVC sliding window are made of UPVC extruded profiles with wall thickness of 2.3 mm ( + 0.2 mm), Window profile with hollow section with multi chamber, Frame (122 mm x 54 mm), Sliding Glazed sash (80 mm x 47 mm), Mesh sash (64 x 47mm) Sliding interlock (One vertical length in each shutters ) (43 mm x 50.5 mm), Glazing bead (29.5 mm x 21.8 mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket, 1.5 mm (+0.2 mm) thick, galvanized steel in Frame 2 Nos, Sliding sash and Sliding mesh sash to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners. complete as per manufacture's specification and direction of Engineer-in charge. |
| 11 | Providing and fixing factory made UPVC white Coloured Casement (Openable) window of total two panels out of which 01 glass and 01 mesh panel for size 0.6 x 1.2 mtr ( panel made of extruded ISI mark profiles which should be lead free and cadmium free manufactured by an ISO 9001:2015 company having macufacuring fascilites in India and having licence of Bureau of Indian Standard with wall thickness of 2.3 mm (+-0.2mm). Window profile with hollow section with multi chamber, frame (67 mm x62 mm), sash (67 mm x 78 mm) T Profile (One vertical lenght in between two shutters) (67 mmx 78.4 mm), Glazing bead (42 mm x 25.8 mm) will be mitered cut and fusion welded at all corners , including drilling of holes for fixing hardware and drainage of water etc, making arragnement for fixing of hardware. EPDM gasket 1.2+-0.2 mm thick , galvanised steel 1.5 mm thick , For Frame (29 mm x 25 mm), sash (38x 28 mm) T Profile (38x25.65 mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100 mm long fasterners. Hardware (Casement handle made of Zinc alloyed (White powder coated), Butt hinges of zonc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system) and 5 mm thick clear toughened glazing with selected quality glass. (Note : The unit rate quoted by contractor excluded cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose complete all as specifed and directed. |
| 12 | S&F factory made 30 mm thick UPVC white coloured casement (Openable) glazed door made of extruded profile with wall thickness of 2.3 mm (+-0.2 mm). Door/Window profile with hollow section with multi chamber, frame (67 mm x 62 mm) , sash (67 mm x 115 mm), T Profile (One verticle length in between two shuteers) (78.4 mmx 67 mm). Glazing bead (42 mm x 25.8 mm) will be mitered cut and fusion welded at corners, including drilling holes for fixing hardware and drainage of water etc, making arragnement for fixing of hardwar. EPDM gasket 1.2+0.2 mm thick galvanised steel frame to be inserted in required profile , frame will be fixed to the wall with 8mmx 100mm long fastners. Hardware : (Casement door handle made of zinc alloyed (white powder coated). Door transmission gear made of mild steel with multi point locking system with strikeds. 3-D hinges of zinc alloyed (white powder coated) and 5 mm thick glazing provision with selected quality glass.(Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories). |
| 13 | Dismantling Wall and ceiling boards (fibre, pulp, AC insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets & snap grid and any description. |
| 14 | Providing PVC false ceiling consisting of 600mm x 600mm, 5mm (±0.25) thick Plain embossed PVC sheet of Density 600 Kg /Cum Manufactured by an ISO-9001-2015 certified Company, used as panel insert in a frame work made using powder coated aluminum T- section of sizes 1” x1” ( 25x25mm, 19 gauge or 1mm thick ) in square pattern of grid sizes of 2’x2’( 600x600mm ). The aluminum framework is supported from the ceiling with the help of 'J' hook and G.I. wire / 6mm M.S. rods of required sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminum L-section of size 1”x1” ( 25x25mm ) angles etc. Complete as per direction of Engineer-In-charge, manufacturer’s specification & drawing. |
| 15 | M&L for Solid PVC Wall Lining Single side prelam PVC sheet used instead of plain colour sheetconsisting of 5 mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 16 | M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 17 | S&F for Factory made WPC Railing combining 18 mm WPC board & 75x50 mm WPC frame thick 100 % solid WPC (Wood Polymer Composite) railing of required length and 2'-2.5 height, comprising of virgin PVC resing of K Value 58-60 (Suspension Grade) , Calcium carbonate and natural fibers (Wood Poweders/rice husk/Wheat husk) and Non toxic additives , made from single Extrusion process, WPC foam board with having minimum density 650 Kg cum and WPC frame with having minimum density 780 Kg/Cum having good screw holding capacity (screw withdrawal strength of 2000 N (Face) & 1100 N (Edge) minimum compressiv str of 50.2 N/mm2 , modulus of elasticity 850 N/mm2 and reistance of spread of flame of Class A category with property of being Termite/Borer free, water/moisture proof and fire retardant FPR WPC railihng WPC Jali to be fixed with WPC frame of size 75 x 50 m with necessary supporting length of verticle as well as horizontal. At wall frames to be fixed with 3\\" x 3\\" GI 'L' or SS Cleats to support vertically frame length complete all as per direction of Enginner in Charge, frames to be fixed with 3\\" x 3\\" GI 'L' or SS cleats to support vertically frame length complete all as specified and directed. |
| 18 | S&F 5 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 19 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick sorrounds, glazed with oil putty or fixed with beads complete all as specified and directed. |
| 20 | S&F 4mm sheet glass ordinary quality and glazing with oil putty/glazing clips in square n. exc 0.5 sqm in each plane all as specified.Rates of Hacking of glass from window frame are included complete all as specified and directed. |
| 21 | M&L anodised aluminium frames for doors, windows side hung/top hung/sliding type (including sliding wheels, star locking arrangments etc) with one or moe rebates including jointing cleats for fixing etc, necessary joining cleats, glazing clips, ruber neoprene packing, power coating minimum thickness of power coating shall be 50 micron as per the specification) complete all as specified and directed. |
| 22 | S&F powder coated aluminium door shutters (side hung/sliding),aluminium partition and similar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, sliding wheels, mortice lock, including Adequate No of handles in each door, hinges,powder coated aluminum snap beading screws, sliding channels, wheels, cleats etc. complete all as specified complete all as specified and directed. |
| 23 | S&F powder coated aluminium windows and ventilator shutters, side hung type, without sash bars aluminium saction weighing 0.55 kg/RM including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fitting such as peg stay 150mm long (1 no) hinges type B21 100 mm long (2 No) suitable handle (1No) including aluminium grill and wire mesh complete all as specified and directed. |
| 24 | S & F in repair for 5.5mm thick sheet glass(tinted),selected quality and glazing with necessory arrangement in square exc 0.5 sq. m in each pane complete all as specified and directed. |
| 25 | S&F in repair for door closer hydraulically regulated(extruded section body), alunimiun body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed. |
| 26 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 27 | S & F in repairs for brass mortice lock, vertical type, size 100 mm and 4 lever any type complete all as specified and directed. |
| 28 | S&F frameless rectangular LED Mirror with touch switch 600mm x 800 mm 5 mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection. mounted on wall with necessory fiments complete all as specified and directed. |
| 29 | Repairing and Fixing of old inbuilt locker including fixing of nut bolts 4 Nos of any size in each locker including welding of hinges, handles , locking arrangement and painting all complete as directed by Engineer in charge) and including welding work in steel inbuilt lockers for broken hinges,handles,inluding two coat painting with synthetic emulsion paint complete all as specified and directed. |
| 30 | S&F in repair 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with both side white balancing (BSB) with density of 850 Kg/cu.m complete all as specified and directed. Make : Action Tesa/ Greenpanel/Century Note : (i) Board on back side wall will be fixed with minimum 5mm PVC spacers. The payment for the same deemed to be included in the quoted unit rates. (ii) Rates of following items are included :(i) Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree.(ii) Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs (For drawers).(iii) Tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished. (iv) D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished.(v) Butt hinges of size 75mm of stainless steel 202 Grade finished/of outer plate metal.(vi) Piano/continuous hinge of size 19 mm stainless steel complete all as specified. |
| 31 | S&F in repair venitian window blinds of any size with closing and opening arrengement complete all as spesified and directed by Engineer-in -charge. Note : Size of window opening measured in sqm complete all as specified and directed. |
| 32 | S&F in repairs premium quality bathroom cabinet of PTMT with looking mirror of size 350x555mm complete all as specified and directed. |
| 33 | Taking down cement plaster including raking out joint, hacking for key & scrubbing down with water etc complete all as specified and directed. |
| 34 | M&L for 15mm thick rendering in CM 1:4 to brick/ concrete wall surfaces finished even & smooth w/o using extra cement complete all as specified and directed. |
| 35 | M&L for 15mm thick rendering in CM 1:6 to brick/ concrete wall/ceiling surfaces finished even & smooth w/o using extra cement complete all as specified and directed. |
| 36 | M&L for 5 mm thick cement plastering in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished fair & even without using extra cement complete all as specified and directed. |
| 37 | Prepration of New external plastered wall surface and applying complete all as specified complete all as specified and directed by Engineer-in-charge of the following :-(a) Applying 1mm thick wall care putty on wall surface and smoothening the surface prepatory to paint.(b) Applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 38 | Prepration of New internal plastered wall/Ceiling surface and applying complete all as specified complete all as specified and directed by Engineer-in-charge of the following :-(a) Applying 1.5 mm thick wall care putty on wall surface and smoothening the surface prepatory to paint.(b) Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 39 | Prepration of old existing external plastered wall surface and applying complete all as specified complete all as specified and directed by Engineer-in-charge of the following :-(a) Applying 1mm thick wall care putty on wall surface and smoothening the surface prepatory to paint.(b) Applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 10 sq.m/litre/1 coats by using roller to old existing external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 10 sq.m/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 40 | Prepration of old existing internal plastered wall/Ceiling surface and applying complete all as specified complete all as specified and directed by Engineer-in-charge of the following :-(a) Applying 1.5 mm thick wall care putty on wall surface and smoothening the surface prepatory to paint.(b) Applying 02 coats of interior emulsion paint (light shade) @ 20 sqm/litre/1 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 41 | M&L for Sun/Solar control window film reflective type 50mm thick with transmittance 50-70% (as approved) sticked to glass panes as per instructions of manufacturers complete all as specified and directed. |
| 42 | Cutting holes in brick (n.exc half brick) walls in cement mortar for inserting holdfasts and making good complete dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required with two coats of oil bound distemper complete all as specified and directed. |
| 43 | Dismantling for floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 44 | M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15 mm thick screed bed in cm 1:6 complete all as specified and directed. |
| 45 | M&L 450x300x7/ 300x600x7 mm mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including 10mm backing coat in CM 1:4 complete all as specified and directed. |
| 46 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed in CM 1:6 complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender