Tender For Restoration And Preservation Of Dhanidhar Fort Rajouri
Tender Value
2.02 Crore
Estimated cost
Bid Submission
25 Jul 2026
13 days left
EMD
4.04 Lakhs
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration And Preservation Of Dhanidhar Fort Rajouri
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.2.6.1 All kinds of soil : |
| 2 | Filling available excavated earth (excluding rocks) in trenches, plinths, sides of foundations etc. not exceeding 20cm in depth; consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m |
| 3 | REMOVAL & DISMANTLING |
| 4 | Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:15.10.1 In lime mortar |
| 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : 15.12.2 Of area beyond 3 sqm. |
| 6 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 7 | ROOF DISMANTLING |
| 8 | Demolishing RCC work by mechanical means & stockpiling at designated locations & disposal of dismantled materials upto a lead of 1 kilometer, stacking serviceable & unserviceable materialseparately including cutting reinforcement bars |
| 9 | Extra for cutting reinforcement bars by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer -in -charge. |
| 10 | Demolishing lime concrete manually/by mechanical means and disposal of material within 50 meters lead as per direction of Engineer-in-charge. |
| 11 | MASONRY WORK |
| 12 | Brick Tile Work :Tile brick masonry with common burnt clay tile bricks of class designation 10 in foundation and plinth including curing complete in: 6.20.1 Lime mortar 1:1:1 (1 lime putty : 1 surkhi : 1 fine sand) |
| 13 | Coursed Rubble Masonry with hard stone in foundation and plinth andcuring complete with:7.6.2 Lime mortar 1:1:1 (1 Lime putty: 1 Surkhi: 1 Fine sand) |
| 14 | Traditional brick masonry with special brick size in lime mortar in propotion similar to the existing traditional lime mortar (lime putty -surkhi 1:2) after removing the damaged and out of plumb masonry from the historic structure, as directed by Engineer incharge/ Architect, and including all leads, lifts and carriage. All complete.Brick masonry for arches with special size traditional bricks |
| 15 | Underpinning brickwork in matching / best lime mortar(1:1) with the brick courses of the historic structure in traditional brick masonry with special brick for superstructures by joining old brickwork with new brickwork. Grooves shall be cut 5cm deep in alternate course of old brickwork, as directed by Engineer incharge/ Architect, and including all leads, lifts and carriage. All complete. |
| 16 | Stitching the cracks in brick masonry using brick and lime mortar matching the traditional lime mortar and bricks as existing in the historic structure after raking, cleaning and washing the cracks, as directed by Engineer incharge/ Architect, and including all leads, lifts and carriage. All complete. |
| 17 | Stitching of Traditional brickwork by inserting red sand stone of size 600 X 300 X 100 MM at identified locations by engineer in charge / architect and grouting the area with lime mortar 1:1 (1 lime: 1 Surkhi) including preparing like cutting out brickwork, teething, cleaning, grouting etc.For all heights and stacking of malba within 100 mtr lead.cleaning and washing the cracks, as directed by Engineer incharge/ Architect, and including all leads, lifts and carriage. All complete. |
| 18 | Brick work in dome/arched structure with well burnt clay bricks of class designation 7.5 in lime mortar 1:1:1 (1 lime putty : 1 surkhi : 1 fine sand) , including preparation of lime putty by proper slaking, mixing of surkhi and sand in specified proportion, addition of traditional additives such as gur, bel pulp, gond, etc. wherever specified, providing and fixing necessary centering and formwork, laying bricks in true radial courses to required curvature, raking and finishing of joints, curing for minimum 21 days, removal of centering after proper setting, scaffolding, all leads and lifts, complete as per drawings and directions of Engineer-in-Charge. |
| 19 | ROOFING |
| 20 | Providing , Careful hosting & Placing Structural steel (I Sections) work in single section fixed with or without connecting plate including cutting hoisting, fixing in position and applying a anti rust paint over priming coat of approved steel primer & , as directed by Engineer incharge/ Architect, Including all formwork, scaffolding proping etc. required. |
| 21 | Providing, hoisting and laying of stone base plate of size (450X 600X 150 MM ) under I sections/wooden beams on the end wall for placing the structural steel/wooden beam, as per the specification |
| 22 | Providing and fixing 1st class well seasoned and chemically treated deodar wood (of approved quality) work in beams ,ties,karis (purlins) and columns , section of various sizes as per drawing /available at site including carving and moulding as per existing in orignal /as per drawing / length as per design and traiditional wooden joinry of members, and fixed in position in traditional detail/manner as directed by Engineer incharge/ Consultants , All member to be finished from all sides with antitermite treatment as approved by the Engineer In-charge / Consultants . Item also include all leads, lifts and carriage upto all heights including necessary framework/scafolding etc required to complete the task. Contractor needs to ensure that moisture content of wood is well within IS codes and Any timber found unseasoned shall be rejected. All timber to be free of knots, cracks etc.Item also includes Anti termite treatment of wood before fixing the frame at site. |
| 23 | Providing and laying of twin layer brick tiles over wooden planks, as directed by Engineer incharge/ Architect, and including all leads, lifts and carriage. All complete. |
| 24 | Providing and laying APP modified pree fabricated 7 layers 3 mm thick water proofing membrane ,black finished reinforced with non woven polyster matt consisting of a coat of bitumin primer for botumen membrane @.4 ltr /sq mtr by the same membrane manufacture of density at 25 degree centigrade ,0.87-0.89 kg/lt and viscosity of 70-160 cps .the laying of membrane shall be got done through authorised applicator of the manufacturer of membrane including laying of geo textile cloth of 70 mils thickness over the APP layer all inclusive and complete. |
| 25 | Lime plaster 20 mm thick 1:1 (1 slaked Lime: 1 surkhi) on over the stone/ wooden slab/terrace of desired level of app sheet including organic additives like sugarcane molasses, extracts of beil,maithi, etc. as per traditional practices.Item includes cost of shuttering /scaffolding /safety measure /use of specified equipment for workers required to complete the work. |
| 26 | Providing and laying of 150 to 200 mm thick lime dhar on roofing as per traditional practice in 1:2:2:2 (1 lime: 2 sand: 2 old lime powder: 2 brick aggregate 12mm to 40 mm nominal size) using methi, gur, hemp, belgiri etc. including beating and temping as per specification. Ramming for minimum 10 days and curing for min 30 days, as directed by Engineer incharge/ Consultants , and including all leads, lifts and carriage. All complete. |
| 27 | Providing gola 75mm x 75mm in lime concrete 1:2:4 (1 lime: 2 coarse sand: 4 graded stone ballast 10mm nominal size) including finishing with lime mortar 1:2 ( 1lime: 2 fine sand), as directed by Engineer incharge/ Architect, and including all leads, lifts and carriage. All complete. |
| 28 | Making khurras 45x45 cm with average minimum thickness of 25 cm lime concrete 1:2:4 (1 lime : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm lime mortar 1:2 (1 cement : 2 coarse sand) and a coat of lime kara , rounding the edges and making and finishing the outlet complete. |
| 29 | Construction of water down drain guides/ channel in Lime – surkhi Plaster 1:1 (1 slaked Lime: 1 surkhi) on wall surfaces of thickness between 15 to 40 as per old design at site up to 450 mm width ,inclusive of lime plastering and lime kara ,75 mm thk side section on both side . Item includes all leads lift and height , cost of shuttering /scaffolding /safety measure /use of specified equipment for workers required to complete the work. |
| 30 | Antitermite coat over wooden member of approved brand and manufacture : all locations prepared and applied as per manufacturer's specifications including , preparation of surface, etc. complete. On wood work |
| 31 | FLOORING |
| 32 | Sub base for flooring: sub- base of 50mm thick bed of local sand evenly spread and rammed brick ballast bed 150mm thick with lime mortar in equal proportion, as directed by Engineer incharge/ Architect, and including all leads, lifts and carriage. All complete. |
| 33 | Providing & laying of the modular brick tile on edge flooring on 20mm thick lime concrete leveling course laid over the sub- base of 50mm thick bed of local sand evenly spread & rammed brick ballast bed 150mm thick including the filling of joints of the brick courses with lime mortar (1lime : 1surkhi / sand). Post construction the exposed mortar joints in floors to be neatly scraped & raked with metal brush to bring neat finish |
| 34 | NEW DOORS/WINDOW /VENTILATORS |
| 35 | Providing and fixing new 1st class well seasoned and chemically treated deodar wood (of approved quality) work in frames of doors, windows, clerestory windows,ventilators , other frames and wrought frame of approved size , as per traiditional wooden joinery of members, and fixed in position in traditional detail/manner with the help of holdfasts / traditional holdfast / handmade nails etc . Item is inclusive of carving /engraving of patterns on fames as per existing patterns on original frames / detail drawing and finish with primer and Redoxide as approved by the Engineer In-charge/ Consultants . Item also include all leads, lifts and carriage upto all heights including necessary framework/scafolding etc required to complete the task. Contractor to ensure that moisture content of wood is well within IS codes and Any timber found unseasoned shall be rejected. All timber to be free of knots, cracks etc.Item also includes Anti termite treatment of wood before fixing the frame at site, coating/painting of section of embedded timber coming into contact with masonry with tar application/ solignum. Measurement of final finished product will be used for the purpose of volume calculation and for payments. various sizes as per drawing /available at site including carving and moulding as per existing in orignal /as per drawing / length as per design and traiditional wooden joinry of members, and fixed in position in traditional detail/manner as directed by Engineer incharge/ Consultants , All member to be finished from all sides with antitermite treatment as approved by the Engineer In-charge / Consultants . Item also include all leads, lifts and carriage upto all heights including necessary framework/scafolding etc required to complete the task. Contractor to ensure that moisture content of wood is well within IS codes and Any timber found unseasoned shall be rejected. All timber to be free of knots, cracks etc.Item also includes Anti termite treatment of wood before fixing the frame at site. |
| 36 | Providing and fixing new doors, windows and ventilators shutters of 1st class well seasoned and chemically treated deodar wood (of approved quality)single/ double leaves 40-50 mm thick fully/partialy glazed openable shutters, panneling of door in wood /glass using 6mm thick Clear float Glass of Saint Gobain or equivalent make ,for doors/windows/ventilator as per the existing original design and pattern /or design as per drawing / as instructed by the Consultants including all necessary fitting/ hardware like screws, nails,metal spikes ,ornamented nails ,metal patterns of flower, metal ribets , parliamentary hinges, tower bolts, handles, traditional MS handmade nails, traditional locking system (hook and chain), decorative features (butt hinges/tower bolt/ handle /door Aldrop/lock) of the same design, material, size and weight, etc . Item to also include making all the mouldings and design of the panels as in the original detail with all beading, patti, carving, marking, as per original existing designs and size of shutters. shutters/panel should be finished from all sides with Redoxide of appropriate shade as approved by the Engineer In-charge / Consultants . Item also include all leads, lifts and carriage upto all heights including necessary framework/scafolding etc required to complete the task. Contractor to ensure that moisture content of wood is well within IS codes and Any timber found unseasoned shall be rejected. All timber to be free of knots, cracks etc.Item also includes Anti termite treatment of wood before fixing the frame at site, coating/painting of section of embedded timber coming into contact with masonry with tar application/ solignum. Overall Length and width of the shutter /panel will be measured of final finished product for the purpose of area calculations & payments. |
| 37 | FINISHING |
| 38 | Lime plaster 15 to 40 MM thickness on wall/flat vertical surfaces Providing and application of Lime – surkhi Plaster 1:1 (1 slaked Lime: 1 surkhi) on wall surfaces of thickness between 15 to 40 MM including organic additives like sugarcane molasses, extracts of beil,maithi, etc. as per traditional practices. The preparation of mortar is to be done following traditional practice includes using chakki/garat (wet grinding of lime and sand by heavy stone mill / chakki/garat), application of mortar in 3 layers with last layer of 6 MM thick, with a gap of minimum 3 days and not more than 10 days from previous layer. The item rate includes application of Loi, tampering, beating, reworking of plaster till the shrinkage cracks disappear and desired finish achieved and curing for 10 days. Item also includes all lead and lift, establishing work yard / chakki, scaffolding, formwork tools and implements etc. |
| 39 | Decorative plaster work in lime surkhi mortar (1:1) as per traditional practice and design, the mortar should be prepared by the grinding mill only. The thickness varying from 10 mm to 100mm as per design, as directed by Engineer incharge/ Architect, and including all leads, lifts and carriage. All complete. |
| 40 | Careful scraping and removing of multiple layers of white wash enamel paint , distemper, oil paint, algae, etc. from plain plaster and surfaces gently with care to keep old designs intact .as per prescribed process and specification . Item includes cost of safety measure /use of specified equipment for workers required to complete the work.(Overall length and width will be measured for the purpose of payment |
| 41 | Scaffolding |
| 42 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. |
| 43 | CONDUIT |
| 44 | Providing and fixing 25 mm dia PVC conduit for laying cable in flooring as per design including all bend ,junction box - all complete . |
| 45 | Providing and fixing 37 mm dia PVC conduit for laying cable in flooring as per design including all bend ,junction box - all complete . |
| 46 | TOILET |
| 47 | Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. |
| 48 | Ordinary rock |
| 49 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 50 | With 40mm nominal size graded stone aggregate |
| 51 | M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) |
| 52 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts andstruts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. |
| 53 | 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 54 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with |
| 55 | 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 56 | Centering and shuttering in cluding strutting, propping etc. and removal of form for: |
| 57 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 58 | Suspended floors, roofs, landings, balconies and access platform. |
| 59 | Lintels, beams, girders, bressumers and cantilevers |
| 60 | Brick work with non modular fly ash bricks confirming to IS:12894, class designation 10 average compressive strength in superstructure above plinth level upto floor five levelincluding curing complete in: |
| 61 | Cement mortar 1:4 (1 cement : 4 sand) |
| 62 | Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed S.S. screws having minimum density of 750 kg/m3 and screw withdrawal strength of 2200 N (Face) |
| 63 | & 900 N (Edge), minimum compressive strength 58 N/mm2, modulus of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately) |
| 64 | Single rebate (100 mm X50 mm) |
| 65 | Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mmx17 mmx 1 mm, painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm |
| 66 | PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement and self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm and 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge: |
| 67 | Decorative finish (both side wood grained finish). |
| 68 | For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 69 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 70 | Filling the gap in between aluminium frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width |
| 71 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) : |
| 72 | With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) |
| 73 | Add extra for providing and fixing froasted glass instead of float glass |
| 74 | With glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) |
| 75 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. |
| 76 | With 12 mm mild steel U beading. |
| 77 | Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete : |
| 78 | 300x16 mm |
| 79 | Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete : |
| 80 | 125 mm |
| 81 | Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete : |
| 82 | 250x10 mm |
| 83 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 84 | Fixed to openings /wooden frames with rawl plugs screws etc. |
| 85 | Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete |
| 86 | In light colour and shades as ivory, beige blanco, grey etc. |
| 87 | (a) Size 300X300 mm thickness 9-10 mm |
| 88 | Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS : 15622 of approved make in all Colours shades, Except burgundy, Bottle green, Black, laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement : 3 sand) jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 89 | Size of Tile 300x450 mm |
| 90 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete.Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. |
| 91 | Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. |
| 92 | Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. samples approved by Engineer-in-charge. |
| 93 | Granite fine grained dark black/ dark red / white with self design/ pattern/ crystal of other colours or glitters |
| 94 | PLUMBING |
| 95 | Providing and fixing white vitreous china Anti germ Fluoro-Polymer Coated Water closet squatting pan with 100 mm sand cast Iron P and S- trap, and 7.2 liter Low level, dual flush, PP (Poly Propylene) made open slim wall hung cistern capacity 3 liter/6 liter flushing, with all fittings and fixtures complete including cutting and making good the wall and floors wherever required |
| 96 | White Vitreous china Anti germ Fluoro-Polymer coated Orissa Pattern W. C. Pan of Size 440X575X250mm With integral foot rests. (Premium Range) |
| 97 | Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin with 15 mm C. P. wall mounted pressmatic Pillar cock auto closing system with square wall flange and spout complete (decol technology), 32 mm C.P. brass waste coupling length 130mm and 32 mm C.P. brass bottle trap size 200x300mm i/c cutting and making good the wall and floors wherever required all fittings and fixtures etc. complete |
| 98 | Providing and fixing white vitreous china type Anti germ fluoro-polymer coated counter top wash basin Size 570X820X195mm with 15 mm C. P. Table Top pressmatic Pillar cock auto closing system (decol technology). (Premium Range) |
| 99 | Providing and fixing white vitreous china Flat Back Anti germ Fluoro-Polymer Coated Urinal (Inbuilt spreaders, Inbuilt Bottle trap and inbuilt ceramic Waste coupling) with 15mm Brass made pressmatic (Decol technology, 400000 operation warranted) concealed flushing Stop cock complete including painting of fittings and brackets, cutting and making good the wall and floors wherever required . |
| 100 | White Vetrious China Anti germ Fluoro-Polymer Coated Urinal Size 480 X 300X740 mm with 15mm Brass made pressmatic auto closing concealed urinal flush valve with wall flange (Decol technology, 400000 operation warranted). (Premium Range) |
| 101 | Providing and fixing bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 102 | Providing and fixing in position best Indian ( bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm, nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn)Bib cock. (Premium Range) |
| 103 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 104 | 25 mm nominal bore |
| 105 | Providing and fixing UPVC trap of self cleaning design complete. Including cost of cutting and making good the wall and floors. 100 mm inlet and 75 mm outlet |
| 106 | Providing and fixing C.P. brass grating of approved quality and make conforming to IS:specification. |
| 107 | 100 mm dia. |
| 108 | Providing and fixing CP brass bottle trap of approved quality and make for sink and wash basin. |
| 109 | Providing and fixing square-mouth S.W. gully trap class SP1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : |
| 110 | 150 x 100 mm size P type. |
| 111 | With well burnt bricks |
| 112 | Providing and fixing unplasticised PVC moulded fittings/ accessories for unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. |
| 113 | Coupler |
| 114 | 75 mm |
| 115 | 110 mm |
| 116 | Single tee with door |
| 117 | 75x75x75 mm |
| 118 | 110x110x110 mm |
| 119 | Single tee without door |
| 120 | 75x75x75 mm |
| 121 | 110x110x110 mm |
| 122 | Bend 87.50 |
| 123 | 75 mm bend |
| 124 | 110 mm bend |
| 125 | Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. |
| 126 | Shoe (Plain) |
| 127 | 75 mm Shoe (minimum wall thickness 1.8mm) |
| 128 | 110 mm Shoe (minimum wall thickness 2.2mm) |
| 129 | Providing and fixing CPVC gate valve with knob of approved quality. |
| 130 | 32 mm nominal bore. |
| 131 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 132 | Concealed work including cutting chases and making good the walls etc. |
| 133 | 20 mm nominal outer dia .Pipes. |
| 134 | 25 mm nominal outer dia .Pipes. |
| 135 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trench |
| 136 | External work |
| 137 | 32 mm nominal outer dia .Pipes. |
| 138 | 40 mm nominal outer dia .Pipes. |
| 139 | Providing and fixing unplasticised Rigid PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm. (minimum wall thickness 3.2mm) |
| 140 | 75 mm diameter (minimum wall thickness 3.2mm) |
| 141 | 110 mm diameter (minimum wall thickness 3.2mm) |
| 142 | Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. |
| 143 | 75 mm diameter (minimum wall thickness 1.8mm) |
| 144 | 110 mm diameter (minimum wall thickness 2.2mm) |
| 145 | Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC soil and waste pipes by means of bombay nail of required length including and making good the wall etc. complete. |
| 146 | 110 mm |
| 147 | Providing and fixing in position best indian Stainless steel made (0.3 micron Chrom and 10 micron Nickel plated) Single Towel Rail 300 mm long |
| 148 | Providing and fixing in position best Indian C. P. brass made Spout (nickel plating 0.10 micron and chrome plating 0.3 micron). (Premium Range) |
| 149 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 150 | Point wiring (excluding metallic switchnbox & sheet but including switches, sockets, lamp holders/ceiling roses etc) with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints etc. as required as per specification for :-Point wiring concealed rigid P.V.C. conduit |
| 151 | Light/fan points primary (Light point/fan points.) |
| 152 | Primary short point |
| 153 | Primary medium point |
| 154 | Primary long point |
| 155 | 3 Pin 6 Amp socket outlet on separate board |
| 156 | short point |
| 157 | medium point |
| 158 | Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 Amp. socket outlet point with 1.5sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit with required materials as per specification on same board. |
| 159 | Wiring for circuit wiring with PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification Circuitwiring 2.5Sq. Mm |
| 160 | 2x2.5 Sq.mm. |
| 161 | 4x2.5 Sq.mm. |
| 162 | 6x2.5 Sq.mm. |
| 163 | Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size etc. with 20/16 Amp. F.T. switch & socket/S.S. combined 20/16/6 Amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints as per specification for :- |
| 164 | On separate board |
| 165 | long point |
| 166 | Supply and fixing PVC conduit ISI marked FRLS along with the accessories in concealed system etc. as required |
| 167 | 25 MM H.M.S. |
| 168 | 32 MM H.M.S. |
| 169 | Supplying and fixing of approved make modular type G.I. metal box 1.2mmnminimum thick and depth 50mm for single row boxes and 60mm depth for two/three row boxes earth terminal stud with nut and washer with modular base and cover plateincluding fixing in concealed etc. as required for:- |
| 170 | Gi Box 1 Or 2 MODULE |
| 171 | Gi Box 3 MODULE |
| 172 | Gi Box 6 MODULE |
| 173 | Gi Box 8/9 MODULE |
| 174 | Supplying and drawing single core PVC insulated cable FRLS with copper multi strand conductor ISI marked in existing rigid PVC casing and capping/conduit in surface or concealed as per specification. |
| 175 | 1.5 sq mm |
| 176 | 1 Wire |
| 177 | 2 Wire |
| 178 | 2.5 sq. mm. wire |
| 179 | 1 X 2.5 sq. mm. |
| 180 | 4.00 sq. mm. wire |
| 181 | 1 X 4.00 sq. mm. |
| 182 | 10.00 sq. mm. |
| 183 | 2 wire 2 X 10.00 sq. mm. |
| 184 | Supplying of ISI marked iron clad/metal clad triple pole and neutral switch fuse unit with two earthing terminals & without HRC fuses – Triple pole and neutral switch fuse with two earthing terminals & without HRC fuses |
| 185 | 63 Amp 415/500 Volts. |
| 186 | Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitablefor 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :-Single pole |
| 187 | MCB SP 6Amp to 32Amp 10kA rating |
| 188 | Double pole |
| 189 | MCB DP For 40Amp 10kA rating |
| 190 | For Triple pole |
| 191 | MCB TP 50Amp to 63Amp 10kA rating |
| 192 | Four pole |
| 193 | MCB FP 50A to 63A, 10kAMCB FP 50Amp to 63 Amp 10kA rating |
| 194 | Supplying & fixing of approved make Industrial type metal plug& socket DBs (without MCB) SPN sheet encloser (dust protected) inclusive of 2 pole and earth metal plug and socket and space to incorporate SP MCB complete as per specification as required. |
| 195 | 20 Amp |
| 196 | Labour charges for fixing sheet steel enclosures, MCB DB surface mounting type, as per accepted practice on 25x25x 5 mm angle iron clamp, including supplying and fixing of clamp duly embedded in wall, cable connection etc. complete :-For item no :- |
| 197 | 27.11.6 & 27.11.7; 27.12.5 ; 27.13.2 to 27.13.4 & 27.14.1 to 27.14.4 ; 27.15.1 to 27.15.4 |
| 198 | Fixing of MCB/MCCB/Isolator in sheet steel enclosure as required as per accepted practice, including mounting on busbar and cable connection etc. complete (labour only) |
| 199 | MCB/MCCB Isolator TP/TPN/FP |
| 200 | Supplying, erecting and testing of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250complete connection and including, frame bolt/anchor holefasteners etc. complete finished and as required. |
| 201 | 300mm sweep RPM 900 / 1400 |
| 202 | Providing and fixing circular/hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by mean of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing. Supplying and fixing fan clamp of 12 mm dia steel bar as per specification complete |
| 203 | Supplying and fixing crimping type alum.lugs as per I.S.S. specification suitable forfollowing size of cable with alu./coppersolid/stranded conductor evenly crimpedwith high/pressure tool and connected toswitch gear/bus/M.C.C.B./M.C.B. etc. as required complete. |
| 204 | 6mm to 16 sq. mm |
| 205 | 120 sq. mm |
| 206 | 150 sq. mm. |
| 207 | Supplying of approved make vertical TPN MCB DB metal double door IP 43 protection with provision for FP MCB/Isolator/RCCB/RCBO as incomer and SP/TP MCBs as outgoing inclusive of busbar, neutral bar, earth bar, & two earth terminals etc. complete as per IS:13032(exclusive of MCB & isolator) |
| 208 | 4 Way (8+12) |
| 209 | Supply of approved make powder coated sheet steel encloser SPN MCB DB inclusive of busbar, neutral bar, earth bar, connection copper wire not less than 16 sq.mm & two earth terminals etc.complete as per IS:13032(exclusive of MCB & isolator)- |
| 210 | 12 Way double door IP 43 protection |
| 211 | Supplying of approved make TPN MCB DB metal double door IP 43 protection with provision for FP MCB/ Isolator/ RCCB/ RCBO as incomer and SP MCBs as outgoing inclusive of busbar, neutral bar, earth bar, connection copper wire not less than 16 sq.mm & two earth terminals etc. complete as per IS:13032 (exclusive of MCB & isolator): |
| 212 | 6 Way (8+18) |
| 213 | Supplying of approved make, powder coated metal double door vertical TPN MCB DB IP 43 protection with provision for MCCB upto160A TP/FP 36kA as incomer and space for SP/TP MCBs as outgoing (without MCCB/MCBs) inclusive of busbar & connections etc |
| 214 | 4 Way without MCCB |
| 215 | Supplying and installing of RCBOs (Residual current circuit breaker with overload and short circuit protection) ISI marked complete as per I.S. standard conforming to IEC:61009-1 & IS:12640-2, 240/415V 50 Hz with 10 kA short circuit withstand capacity for earth leakage, overload & short circuit protection including connection in existing enclosure in approved manneras per specification. |
| 216 | DP (4 module) |
| 217 | 2 pole 6Amp to 25Amp, 30 mA sensitivity |
| 218 | Fixing of MCB/MCCB/Isolator in sheet steel enclosure as required as per accepted practice, including mounting on busbar and cable connection etc. complete (labour only) |
| 219 | MCB/Isolator SP/DP |
| 220 | MCB/MCCB Isolator TP/TPN/FP |
| 221 | 3d Lidar scanning and generation of point cloud data of fort complex including preparation of 3d model from point cloud data. |
| 222 | Providing of 1.2 m wide wooden ramp of lenght 30m with Stringers 40x40x3 mm MSsquare tube, Cross members 40x6mm MS Rlat, Handrails SS pipe 304grades with press fit technology as per JIS 3448 standard 42.70 mm outer dia, Wooden planks of Second class kail wood, nails, screws, fitting. labour charges all complete.- as per approved design, In consultation with consultant |
| 223 | Providing of water tank MS cage of size 10 m by 10 m as per approved design, In consultation with consultant. |
| 224 | Providing of Signage boards with 2 main boards of size 1.5 m by 2 m and 5 information boards of size .8m by 1.5 m as per approved design, In consultation with consultant. |
| 225 | Conservation Management Plan of Fort including detailed architural drawings, conservation drawings and proposal drawings (Consultancy) @ 2% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender