Tender For Providing And Fitting Of Hydrant/Irrigation Equipments And Allied Works At B.C Parks Jammu.
Tender Value
3.04 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
4 days left
EMD
6080
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fitting Of Hydrant/Irrigation Equipments And Allied Works At B.C Parks Jammu.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and Laying of GI Pipes of medium Grade of parkashsurya, Jindal or TATA preferred make in dug out out trenches including cutting, threading, making of joints, complete with sockets. The Job includes digging of trenches for laying of pipelibe including refilling of trenches (depth of the trenches as per site conditions).a. 15mm dia |
| 2 | b. 20mm dia |
| 3 | c.25mm dia |
| 4 | d.40mm dia |
| 5 | e.50mm dia |
| 6 | f.65mm dia |
| 7 | g.100mm dia |
| 8 | Earth work in excavation by manual means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtrs in width as well as 10 sqm. on plan. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in all kinds of Soil cum. |
| 9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 cum. |
| 10 | Providing and fixing gun metal gate valve with C.l. wheel of approved quality (screwed end).15 mm nominal bore |
| 11 | 20mm nominal bore |
| 12 | 25 mm nominal bore |
| 13 | 50 mm nominal bore |
| 14 | 65 mm nominal bore |
| 15 | Providing and fixing ball valve (brass) of approved quality Complete.15 mm nominal bore |
| 16 | 20 mm nominal bore |
| 17 | 25 mm nominal bore |
| 18 | Providing and fitting of starter for 1HP-10HP monoblock Pump set of Havels or L&T preferred make. |
| 19 | Providing and fitting of SPN of Havells/L&T/Wipro/Indo Kopp or equivalent preferred make.32 Amp SPN |
| 20 | 40 Amps SPN |
| 21 | 63 Amp SPN |
| 22 | Supplying and drawing following sizes of FR PVC Insulated cupper conductor, single core flexible cable in the existing Surface/Recessed steel/ PVC conduit as required.1.5 mm sq |
| 23 | Providing and laying of armored aluminum cable encased in 3” ID ribbed flexible PVC hose pipe to act as conduit for cable of Havels, Anchor, Finolex, Polycab or Equivalent preferred make in dug out trenches. The job includes digging out Trenches and laying of cable including refilling of trenches. |
| 24 | Providing and laying of armored aluminum cable of Havels, Anchor, Finolex, Polycab or Equivalent preferred make in dug out trenches. The job includes digging out Trenches and laying of cable including refilling of trenches.10mm sq 2 core |
| 25 | Providing and laying of armored aluminum cable of Havels, Anchor, Finolex, Polycab or Equivalent preferred make in dug out trenches. The job includes digging out Trenches and laying of cable including refilling of trenches.a. 16mm sq 2 core. |
| 26 | b. 16mm sq 4-core. |
| 27 | Hire Charges of Technicians engaged for the Welding, fitting of damaged parts of Motor Sheds, Starter Sheds, Main panel, raising of motor sheds etc. with other allied works.Welding set (01 Nos.) |
| 28 | Welder (01 Nos.) |
| 29 | Providing and fitting of 1.5 HP, single-Phase monoblock pump/motor set of Kiriosker, KSB, Crompton and Greaves or Usha preferred make . The job includes material, carriage and labour charges. (Head and discharge as per site conditions and as approved by site Engineer) |
| 30 | Providing and fitting of MS ornamental shed 4'-0\\" x 2'-0\\"with ornamental roof of height 3’-0\\". The ornamental shed is to be fabricated out of 16 gauge MS sheet with front door in two equal halves having proper bolting system. Angle irons extended from four corners of the shed are to be grouted in cement concrete block. Painting one coat of steel primer and two coats of synthetic enamel paint inside and outside is also included in the job. Complete including all material require labor and carriage charges. |
| 31 | Providing and fitting of starter panel filled with 32Amps contactor, Over-load relay, single phase preventer, MCB TPN, Amp Meter, Selector switch, push button etc. Angle Irons extended from corner of the panel are to be grouted in cement concrete block, painting of synthetic enamel paints inside and outside is also included in the job. Complete job including all material required, labour and carriage charges. |
| 32 | Proving and filling of GI Fittings: a. ½\\" Elbow |
| 33 | b. ½\\" Union |
| 34 | c. ½\\" Tee |
| 35 | d. ½\\" Socket |
| 36 | e. ½\\" Plug |
| 37 | f. ½\\" Tank nipple |
| 38 | g. ½\\" Cap Plug |
| 39 | h. ½\\" x 2\\" Nipple |
| 40 | i. ½\\" x 4\\" Nipple |
| 41 | j. ½\\" x 6\\" Nipple |
| 42 | k. ½\\" x 12\\" Nipple |
| 43 | l. 1\\" Elbow |
| 44 | m. 1\\" Union |
| 45 | n. 1\\" Tee |
| 46 | o. 1\\" Socket |
| 47 | p. 1\\" Plug |
| 48 | q. 1\\" Cap plug |
| 49 | r. 1\\" Tank nipple |
| 50 | s. 1\\" x 2\\" Nipple |
| 51 | t. 1\\" x 4\\" Nipple |
| 52 | u. 1\\" x 6\\" Nipple |
| 53 | v. 1\\" x 9\\" Nipple |
| 54 | w. 1\\" x 12\\" Nipple |
| 55 | x. 1\\"x ½\\" reducer elbow |
| 56 | y. 1½\\" Elbow |
| 57 | z. 1½\\" Union |
| 58 | A. 1½\\" Tee |
| 59 | B. 1½\\" Socket |
| 60 | C. 1½\\" Plug |
| 61 | D. 1½\\" x 2\\" Nipple |
| 62 | E. 1½\\" x 4\\" Nipple |
| 63 | F. 1½\\" x 6\\" Nipple |
| 64 | G. 1½\\" x 9\\" Nipple |
| 65 | H. 1½\\" x 12\\" Nipple |
| 66 | I. 2\\" Elbow |
| 67 | J. 2\\" Union |
| 68 | K. 2\\" Tee |
| 69 | L. 2\\" Socket |
| 70 | M. 2\\" Plug |
| 71 | N. 2\\" x 2\\" Nipple |
| 72 | O. 2\\" x 4\\" Nipple |
| 73 | P. 2\\" x 6\\" Nipple |
| 74 | Q. 2\\" x 9\\" Nipple |
| 75 | R. 2\\" x 12\\" Nipple |
| 76 | S. 2\\"x 1½\\" reducer elbow |
| 77 | T. 2\\"x 1 ¼” reducer Tee |
| 78 | U. 2½\\" Elbow |
| 79 | V. 2½\\" Union |
| 80 | W. 2½\\" Tee Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender