Tender For Addition Alteration To Certain B/R And E/M Wks Certain Ms Accn Of Engr Regt At Rana Sanga Enclave In Mil Stn Kaluchak Under Ge Kaluchak
Tender Value
43.20 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
19 days left
EMD
86400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kaluchak → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition Alteration To Certain B/R And E/M Wks Certain Ms Accn Of Engr Regt At Rana Sanga Enclave In Mil Stn Kaluchak Under Ge Kaluchak
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed. |
| 2 | Demolition of cement concrete (Re-inforced) of any description and in any position not otherwise specifically provided for. complete all as specified & directed. |
| 3 | Demolition of cement concrete (un Re-inforced) of any description and in any position not otherwise specifically provided for. complete all as specified & directed. |
| 4 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing with neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified & directed. |
| 5 | Taking down cement plaster/wall tiles including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed |
| 6 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed. |
| 7 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified & directed. |
| 8 | Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed. |
| 9 | M&L Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6, complete all as specified & directed. |
| 10 | M&L Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:6 but except brick i.e. using serviceable bricks obtained from Srl item No. 9 here-in-before, complete all as specified & directed. |
| 11 | M&L Pressed steel frames of size 125mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate., complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately. |
| 12 | M&L Pressed steel frames of size 105mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate., complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately. |
| 13 | M&L PCC 1:3:6 nominal mix, type C-0 using 12.5mm graded crushed stone aggregate as in filling of pressed steel door frames/chowkats, complete all as specified & directed. |
| 14 | M&L PCC 1:2:4 type B-1 using 20 mm graded aggregates as in anchoring hold fast, parapets, copoing, apex plates, bed plates and the like including weathering slightly rounded or chamfered angles and throating etc. complete all as specified and directed. |
| 15 | S & F for 35mm thick 2nd class hard wood (Sal/Hollock), glazed and skeleton shutters (factory made), open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, complete all as specified & directed. |
| 16 | Ditto all as per item ser no 15 here-in-before but partly panelled shuuetrs (bottom portion) & partly skelton shutter (top portion) suitable for fly proofing complete all as specified & directed. |
| 17 | S & F in 30mm thick flush shutters solid core constructions with block board core any plywood face panels commercial type on both face is covered with decorative face veneer with lipping/frame to match. complete all as specified & directed. |
| 18 | M & L Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter with side hung shutters including 3 mm thick Glass panes, Stainless steel wiremesh 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, MS handles and MS peg stay dovetailed or welded - 02 Nos, MS Tower bolts 150 mm long for each leaf and 8 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts etc all as shown on Drg No CEPZ/TD -354/09 sheet 1/3 to 3/3 including one coat of red oxide zinc primer, complete all as specified and directed . |
| 19 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified & directed. |
| 20 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet 5mm thick to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified & directed. |
| 21 | M&L for Hasp and staple 100 mm in size, aluminium anodised, including bolt to hinge plate and fixed with screws. complete all as specified & directed. |
| 22 | M&L 18 to 20mm thick PVC celuka board without lamination of any colour as in kitchen cupboard shutters/shelves including of magnet catchers etc, fixed in repairs , complete all as specified & directed. |
| 23 | S& F magnet door catcher for cupboard shutter complete all as specified and directed. |
| 24 | Supply & fixed in repair 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, including necessary wooden or PVC lipping all around fixed with screws/nails to timber frame or wooden cleats work as in shelves of cupboards etc all as specified and directed. |
| 25 | S & F of zero crank hinges of size 150mm heavy duties softning and closing types as in shutters of cupboards in kitchen , complete all as specified and directed. |
| 26 | S&F continuous (piano) hinges, mild steel bright finish or electro galvanised width of flaps(when open) 30 in mm complete all as specified & directed. |
| 27 | S&F for Butt hinges 100 mm long, stainless steel, medium weight and fixed complete all as specified & directed. |
| 28 | S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed complete all as specified & directed. |
| 29 | S&F Aluminium, anodised, barrel tower bolts 200 mm of extruded section and fixed complete all as specified & directed. |
| 30 | S&F Aluminium, anodised, barrel tower bolts 150 mm of extruded section and fixed complete all as specified & directed. |
| 31 | S&F Aluminium, anodised, handles 150 mm of extruded section and fixed complete all as specified & directed. |
| 32 | S&F Aluminium, anodised, handles 125 mm of extruded section and fixed complete all as specified & directed. |
| 33 | S&F for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 34 | Mild steel, 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door frame. complete all as specified & directed. |
| 35 | S & F for Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with statinless steel wire staples. complete all as specified & directed. |
| 36 | S&F, 5 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane , fixed in repair, complete all as specified and directed. |
| 37 | Supply and fixing in repair 25mm outer dia stainless steel decorative curtain rod with brackets & knobs fixed on wall including all necessary fitting of projecting 150 mm outer side from the clesr opening of doors/window all as specified by Engineer -in-charge ( Including necessary fittings) |
| 38 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls or removal to store with all fittings, complete all as specified and directed. |
| 39 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing ,etc., and making good, cutting not exc 20 cm girth in brick walls, complete all as specified. |
| 40 | Supply & fix CPVC (Chlorinated poly vinyl chloride) pipes, bore (inner dia) of pipe in 15 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified & directed.Note :- The rate for pipe including all pipe fittings such as ends, elbows, unions, tees reducing tees, adapters, sockets, plugs, house clips as well as brass threaded fittings for all opening/connections such as Bib taps/Stop valve etc. |
| 41 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 42 | Supply & fix CPVC (Chlorinated poly vinyl chloride) pipes, bore (inner dia) of pipe in 20 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified & directed.Note :- The rate for pipe including all pipe fittings such as ends, elbows, unions, tees reducing tees, adapters, sockets, plugs, house clips as well as brass threaded fittings for all opening/connections such as Bib taps/Stop valve etc. |
| 43 | Taking up or down steel tubing of 25 mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 44 | Supply & fix CPVC (Chlorinated poly vinyl chloride) pipes, bore (inner dia) of pipe in 25 mm of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified & directed.Note :- The rate for pipe including all pipe fittings such as ends, elbows, unions, tees reducing tees, adapters, sockets, plugs, house clips as well as brass threaded fittings for all opening/connections such as Bib taps/Stop valve etc. |
| 45 | Supplied and fixed Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. |
| 46 | Supply and fixed in repairs to Stop valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 25 mm bore and fixed. complete all as specified & directed. |
| 47 | Supply and fixed in repairs to Bib tap 15 mm bore long body, Brass CP, fancy type (long shank )., with crutch or butterfly handle screwed down screwed for iron/PVC pipe or for brass ferrule and fixed, complete all as specified & directed. |
| 48 | S & F in repair brass CP wall mixer without telephonic for screwed down for iron pipe and fixed complete all as specified & directed. |
| 49 | Supply and fix in repair brass CP Sink mixer for making hot and cold water screwed down for pipe and fixed. complete all as specified & directed. |
| 50 | M &L for Stop valve /Angle valve (ISI Marked), fancy type, chromium plated with long shank and cup (concealed type). screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron /PVC pipe or for unions of 15 mm bore and fixed in repair complete all as specified & directed. |
| 51 | Supply and fixed in repairs for Stop valve /Angle valve (ISI Marked), fancy type, chromium plated and cup (concealed type) ,screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron /PVC pipe or for unions of 15 mm bore and fixed in repair complete all as specified & directed. |
| 52 | Supply & fixed overhead shower , 65 mm ABS shower (without arms). complete all as specified & directed. |
| 53 | Supply and fixed Soap dish cantabile-clea (material SS finish, glossy) fixed to plugs with CP brass screws. complete all as specified & directed. |
| 54 | S & F in repair corner glass shelf with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified & directed. |
| 55 | S & F in repairs Vitreous china of EWC pattern, long pan size 550x440mm , with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete fixed in repairs including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe fixed in repair. complete all as specified & directed. |
| 56 | S&F in repair health faucet with all connected accessories complete all as specified & directed. |
| 57 | Supply & fixed in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litres. complete all as specified & directed. |
| 58 | M&L for sunken treatment with glass fiber reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent) complete all as following :-Base Coat : Berger HS Latex plus (or equivalent)consumption base coat : 0.3 kg/m2Reinforcement : Glass fiberSecond and Third coat : Latex sheild 2K (or equivalent)Consumption top coat : 3 kg/m2System reqquirements : density : 2.00 kg/ltr;Compressive strength: 0.5N/mm2Wall penetration through the RCC slab must be sealed using Berger HS Repair (or equivalent).Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus (or equivalent) modified mortar with a bonding coat of Berger HS Latexplus (or equivalent) modified cement slurry upto sft.All depressions, unevenness, surface honeycombng shal be repaired using Berger HS Latex plus (or equivalent) modifiled polymer mortar with a bonding coat of Berger HS latex plus (or equivalent) modified cement slurry.Including cleaning of RCC surface to remove dust, loose paricles, etc with compressed air or any other suitable technique depending on site conditions, grinding aby sharp edges, etc.Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'AB' on page no. 101 of tender documents as per Sch 'A' Note No 19 Page No 17). |
| 59 | Supply only Integral water proofing compound liquid complete all as specified & directed. |
| 60 | M&L for hard core, of broken bricks broken to gauge n exc 63mm for laying sub base of thickness 150mm complete all as specified and directed. |
| 61 | M&L Cement concrete type D-2 1:4:8 (40mm graded crushed stone aggregate) in foundations, filling and mass concrete in sub base complete all as specified & directed. |
| 62 | S&F 20mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in as spout pipes to pour out rsidual water out from the treated area. complete all as specified & directed. |
| 63 | Supplied and fixed sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed. |
| 64 | M&L Stainless steel plate rack(Utensil Rack) of size (900mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts,bolts & washers complete all as specified and as directed. |
| 65 | Supply & fixed, Vitreous china wash basin, white flat back, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but inclluding vitreous china pedestal and PVC waste pipe with union, flexible suitable for wash hand basin or urinal, 32 mm dia. |
| 66 | S & F 32 mm dia, Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 suitable for waste pipe etc fixed complete to walls, ceilings or in floors etc. complete all as specified & directed. |
| 67 | Supply & fixed in repair, Pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia bore of pipe . complete all as specified & directed. |
| 68 | Supply & fixed in repair 600 x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers. complete all as specified & directed. |
| 69 | Supply and fixed in repairs of Brass CP towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified and directed. |
| 70 | S & F in repairs of Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed. |
| 71 | Supply & fixed, PVC connection 15 mm bore with PTMT nuts of length 450 mm long. complete all as specified & directed. |
| 72 | M&L PVC (SWR) floor trap, dia of outlet in 75 mm, plain excluding grating, but including jointing with solvent cement fixed in repair. complete all as specified & directed. |
| 73 | Supply & fixed PVC grating square, 100 mm (Hinge pattern and with or without hole). complete all as specified & directed. |
| 74 | Supply & fixed in repair, 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. complete all as specified & directed. |
| 75 | Supply & fixed , 110 mm bore PVC (SWR) bends any radius, with or without excess door. complete all as specified & directed. |
| 76 | Supply & fixed , 110 mm bore PVC (SWR) branch piece , with or without excess door, single (Single Y) equal or unequal.with excess door. complete all as specified & directed. |
| 77 | Supply & fixed , 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal,with excess door. complete all as specified & directed. |
| 78 | Supply & fixed , 110 mm bore PVC (SWR) vent cowl complete all as specified & directed. |
| 79 | Supply & fixed in repair, 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenches or in floor. complete all as specified & directed. |
| 80 | Supply & fixed in repair, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenches or in floor. complete all as specified & directed. |
| 81 | Supply & fixed in repair, 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. complete all as specified & directed. |
| 82 | Supply & fixed , 75 mm bore PVC (SWR) bends any radius, with or without excess door. complete all as specified & directed. |
| 83 | Supply & fixed , 75 mm PVC (SWR) junction double, (double T), with excess door, equal or unequal complete all as specified & directed. |
| 84 | M & L for Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified and directed . |
| 85 | M & L for Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in skirting etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar 1:3, complete all as specified and directed . |
| 86 | M &L for Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but nexc 0.11 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified and directed . |
| 87 | M & L for Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed. |
| 88 | M & L for 20 mm thick granite black marble (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including Screed bed or bedding layer of mortar 15mm thick for laying floor in CM 1:4 finished even & rough to receive top layer, complete all as specified and directed. |
| 89 | M&L Machine cut Kota stone slab flooring not less than 19mm thick (size of stone shall in single piece of the stair tread and riser), laid over & including 15 mm thick screed base in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified & directed. |
| 90 | M&L Machine cut Kota stone slab not less than 19mm thick as in riser of steps, skirting, dado and pillar laid over & including 15 mm thick screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified & directed. |
| 91 | M&L Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as specified & directed. |
| 92 | M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded agg) as in Sub-base to floor finishes. complete all as specified & directed. |
| 93 | M&L Rendering 10 mm thick plaster in cement mortar 1: 3 on concrete surfaces as in ceilings finished even and smooth without using extra cement, complete all as specified & directed. |
| 94 | M&L Rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:6, finished even and smooth without using extra cement. complete all as specified & directed. |
| 95 | M&L for capillary rise treatment of walls as following :-Base coat: Berger HS Latex plus (or equivalent)Consumption base coat: 0.3 kg/m2Second and Third coat: Latex sheild 2K (or equivalent)Consumption top coat: 3 kg/m2System requirements: density: 2.00 kg/ltrCompressive strength: 0.5 N/mm2 Note :-The concerned items should be executed by OEM authorized applicator after signing of MOU (format attached as Appendix 'GH' on page no. 113 of tender documents as per Sch 'A' Note No 19 Page No 17). |
| 96 | M&L Rendering 15 mm thick on fair faces of brick/concrete surfaces in cement plaster 1:4, using water proofing compound mix as per manufacturer detail, complete all as specified and as directed. (WPC measured and paid seperately) |
| 97 | M&L Rendering 15 mm thick on fair face of brick work or concrete surface in CM 1:4, finished even and smooth without using extra cement. complete all as specified & directed. |
| 98 | M&L for 75 mm thick cement concrete 1:2:4, type B2 (using 40mm graded agg) as in plinth protection finished even and smooth using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified & directed. |
| 99 | M&L Preparation of newly plastered surface of wall & applying 1 mm thick Acrylic wall care putty on wall surfaces and all as specified and directed. |
| 100 | M&L Preparation of old plastered surface of wall & applying 3mm thick Acrylic wall care putty on wall surfaces and all as specified and directed. |
| 101 | M&L Preparation of newly plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade , complete all as specified & directed. |
| 102 | M&L Complete removal of existing treatment of wall surfaces and applying two coat of oil bound distemper, white or tinted shade , complete all as specified & directed. Please Enable Macros to View BoQ information |
| 103 | M&L Complete removal of existing treatment of wall surfaces and applying two coat of oil bound distemper, white or tinted shade , complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender