Tender For Special Repair To Bldg No T-196 (Office Shelter) Of 267 Sata Bty At Hyms, Sumdo Under Ge 863 Ews.
Tender Value
29.71 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
18 days left
EMD
59420
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kinnaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-196 (Office Shelter) Of 267 Sata Bty At Hyms, Sumdo Under Ge 863 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises |
| 2 | M &L for 25 mm thick PCC 1:2:4 type BO (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge |
| 3 | M & L for Virified Ceramic tiles Light shed 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 4 | M & L for non skid coloured ceramic tiles 7 to 8mm thick square / rectangular area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor laid over 15 mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile complete all as specified and directed by Engr-in-charge. |
| 5 | M & L for glazed ceramic tiles in vertical surface such as skirting, dados and rises to steps etc 350x 250x 7 mm/ 450X 350X 7mm thick over 10mm thick cement morter in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tile complete all as specified and directed. |
| 6 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 7 | M &L for 75 mm thick PCC 1:2:4 type D2 (Using 40 mm graded stone aggregate) as in sub base under chequered tiles complete all as specified and directed by Engr-in-charge |
| 8 | M&L for chequered cement concrete tiles 20 cm by 20 cm by 25 mm thick including screed bed 20mm thick in (CM 1:6) , with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors. |
| 9 | M&L PCC (1:3:6) type C-2 using 40mm graded stone agg 75mm thick as in plinth protection finished even and fair without using extra cement. |
| 10 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings |
| 11 | Taking down and Re-fixing of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 12 | S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 13 | Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed. |
| 14 | M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed. |
| 15 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets. |
| 16 | Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified. |
| 17 | M&L 2nd class hard wood in scantling timber framed work fixed clean sawn directed complete all as specified and directed by Engr-in-charge. |
| 18 | M&L for 6mm thick decorative veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces fixed with screws to timber frame work as in wall pannelling/ceiling/cup board shutters complete all as specified & directed. |
| 19 | M&L for 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face has decorative veneer fixed to timber frame work, complete, all as specified and as directed. |
| 20 | Dismantling Unframed timber scantlings under 40 Sq. cm and over in section and in any position complete all as specified. |
| 21 | S & F Second class hard wood plain fillets, wrought, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 and not exceeding 6 Sq. cm |
| 22 | M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed. |
| 23 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified |
| 24 | Anodised alumnium Door,window and ventilator shutter side hung type with sash bars aluminium section weigh .55kg/m, including necessary joining cleats, glazing clips rubber packing anodised aluminium snap beading screw, anodised aluminium fitting such aspeg stays 150mm long (1 no)hinges type b-21 100mm long (2no) suitable handle (1no) complete all as specified. |
| 25 | Taking down chowkat or frames exc 1.5 sqm but n. exc 4 sqm each (w/o taking of shutters from the frame ) complete all as specified |
| 26 | S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints. complete all as specified |
| 27 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 28 | Rifixing of shutter exc 1.5 sqm but n.exc 4 sqm each complete all as specified |
| 29 | S and F Mild steel barrel tower bolts, 150 mm long stove enamelled black, with bright bolt and fixed complete all as specified |
| 30 | S & F in repairs of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 140 mm complete all as specified |
| 31 | S and F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and fixed complete all as specified |
| 32 | S and F 125 mm long MS Butt hinges medium weight, cold rolled mild steel, and fixed complete all as specified |
| 33 | S & F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised in repairs complete all as specified |
| 34 | S and F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 35 | S&F door closers of aluminium die cast body hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kgs and fixed, complete,all as specified and directed. |
| 36 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low levelcistern complete all as specified and directed. |
| 37 | S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed. |
| 38 | S & F in repairs for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 39 | S&F in repair CP jet Spray with 15mm bore flexible connecting pipe complete with all assembly as directed. |
| 40 | S & F in repairs White toilet paper holder, vitreous china box type fixed to wall with chromium plated brass screws,complete all as specified and directed. |
| 41 | S&F in repairs for Wash basins, Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and as directed. |
| 42 | S&F in repairs mirror glass of size 0.60X0.450m bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with cromium plated brass screw and cup washer etc complete all as specified and as directed. |
| 43 | S&F in repair brass CP mixer, 15mm bore ,for mixing hot & cold water screw down for iron pipe , complete all as specified and as directed. |
| 44 | S & F in repairs Vitreous China Half stall type urinals, white, with geating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe, complete, all as specified and directed. |
| 45 | S&F in repair brass CP Stop cock/ Angle cock 15mm fancy type choromium platedetc, complete all as specified and as directed. |
| 46 | S&F in repairs bib taps cast copper alloy , choromium plated ,with crutch or butter fly handle screwed down screwed for iron pipe etc complete 15mm dia complete all as specified and as directed. |
| 47 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 48 | S&F PVC waste pipe 32mm bore with cup and washers for WHB complete on new or old locations. |
| 49 | S&F PVC waste pipe 40mm bore with cup and washers complete on new or old locations. |
| 50 | S & F in repairs 20 mm dia Aluminium anodised tubular towel rail, D type, 60cm long between flanges complete all as specified and directed. |
| 51 | M & L cast iron floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 52 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed. |
| 53 | S&F Hand Dryer smart flow material ABS finish white complete all as specified and directed.Make - Jaguar Cat Part No - HDR WHT - M04A or its equivalent in Hindware/Parryware. |
| 54 | Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to all store as specified and directed |
| 55 | S & F 500 Ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 56 | S&F PUF insulated cylndrical tank of capacity 500 Ltr Vertical type double layer duly filled with puf insulation superior quality to resist in temp -30 to +35 degree centigrade alongwith hinged top lid of same material with locking arrangement and hoisted on platform complete with making pipeline connection with the following specification:-(a) Inner tank will be double layered HDPE food grade material.(b) Outer 4mm thick FRP jointless casing of tank.(c) Thickness of PUF insulation shall be 75mm.(d) Minimum density of PUF insulationshall be 44 kg per/cum+ 10%. |
| 57 | Taking up or down 15 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 58 | Taking up or down 20 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 59 | S&F 16mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified |
| 60 | S&F 20mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified |
| 61 | S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall, complete, all as specified and directed. |
| 62 | S & F 20mm bore of pipe PP-R Gate valves (brass insert) as per requirement of the site, complete, all as as specified and directed. |
| 63 | S & F in repair 25mm bore of pipe PP-R Ball valves (brass insert) as per requirement of the site, complete, all as as specified and directed. |
| 64 | Demolition of reinforced cement concrete cover slab for MH/Spetic tank and removing the debris to a distance not exc 500 M as directed. |
| 65 | M & L precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab for Man holes/Septic tank set in CM 1:4 complete all as specified and directed. |
| 66 | M&L for mild steel deformed bars or TMT bars10mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 67 | M&L for mild steel deformed bars or TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 68 | Dismantling of cast iron ,PVC or reinforced concrete pipes 110 mm/ 75mm dia bore jointed in cement mortar and taking out of trenches if reqd of any dia |
| 69 | S&F in repairs PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors and spout pipe of retaining wall complete all as specified and as directed |
| 70 | S & F 75mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed. |
| 71 | S & F 75 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 72 | S & F 110 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 73 | S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, complete all as specified and directed. |
| 74 | S & F 75 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, complete all as specified and directed. |
| 75 | S & F 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls |
| 76 | S & F 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls |
| 77 | Demolition of precast concrete block walling built in cement morter complete all as directed. |
| 78 | M&L for precast cement concrete block masonary walling type C-I 1:3:6 using 20mm graded aggregate with solid blocks, exc. 10 cm in width and setting in CM 1:6 complete. |
| 79 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 80 | M & L for rendering 15mm thick in cement plaster 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement complete all as specified and directed. |
| 81 | M & L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 82 | M&L for anodised rails of anodiesed aluminium alloy with fixing brackets stops,roilers etc all as specified |
| 83 | taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, , pendents, regulators sockets, light fittings , holder, bell push, ding dong etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and making good disturbed suefaces of walls, floor etc. |
| 84 | M&L for point wiring using approved colour coding as per IS with using 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & capping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing modular switches sockets etc. all as specified for one light point/ fan Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 85 | All as per Srl item No 84 here-in-before but controlled with one 3 pin socket outlet 5 Amp, independent board with other switches with cable 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 86 | All as per srl item no 84 here-in-before but controlled with one 3 pin socket 15 Amp on the independent board with other switches with cables 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge. |
| 87 | Supply and fixing of modular socket 6A - 2/3 pin combined 2 module, outlet 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, |
| 88 | Supply and fixing of modular switch1 way 6A 1 module , 230 Volt, complete all as specified and directed by Engineer -in-Charge, Make :ANCHOR or equivalent. |
| 89 | Supply and fixing of modular switch1 way 16A 1 module , 230 Volt, complete all as specified and directed by Engineer -in-Charge, Make :ANCHOR or equivalent. |
| 90 | Supply and fixing modular socket 6A/16A - 2/3 pin combined 2 module,230 Volts flush type complete all as specified and directed by Engineer-in-Charge. |
| 91 | Supply and fixing modular White cover plate with frame,2 module complete all as specified and directed by Engineer-in-Charge. |
| 92 | Supply and fixing modular White cover plate with frame,6 module complete all as specified and directed by Engineer-in-Charge. |
| 93 | Supply and fixing modular White cover plate with frame,8 module complete all as specified and directed by Engineer-in-Charge. |
| 94 | M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge. Make :ANCHOR or equivalent. |
| 95 | S/F in replacement LED integrated batten tube light fittings 20W 4 Feet long complete with twin core twisted flexible copper conductor cable complete all as specfied and directed. |
| 96 | Supply and fixing LED Lamp 12 Watt in lamp (bulb) holder complete all as specified and directed. |
| 97 | Supply and fix Bajaj LED Bulk head light fittings, 10 W cool white, color temperature 3500-4100K wall mounting type complete all as specifed and directed of equavalent make : CG/Philips/wipro etc. |
| 98 | Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 12 way 240 volt complete all as specified and direct by Engineer-in-Charge . |
| 99 | Supply and fixing in replacement of miniature circuit breaker (MCB) SPN 40 AMP rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning |
| 100 | Supply and fixing in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 101 | M & L in replacement for earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thicj\k buried directly in ground ( earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 4.0 mm dia as earth continuty conductor by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR-I 2010, connected to main switch board all as specified and including testing on completion , necessary excation, earthwork, PCC works ans CI earth pit cover with watering pipe 20 mm dia GI pipe medium grade , funeels with wire mesh and lugs GI pipe of 15 mm dia of light grade for protection of earth wire upto 7.5 mtrs complete all as specified and directed by Engineer-in-Charge. Note:- On testing after completion if the desired resistance is not obtained the earthing shall be re- done aat no extra cost. |
| 102 | S & F in repair Sub main wiring using two runs of single core PVC insulated cable with copper conductor multistranded 1100 volts of sizes 6.0 Sqmm through existing/ new in wall with PVC casing caping including copper earth wire in green colour of size 6.0 Sqmm connection to DB with thimbling complete as specified and directed. (Note:- Two runs of sub main wire including earth wire and rigid non metalic PVC casing caping shall be measured as one unit per RM make of cable) Contractor must make wall/ceiling cheasel cutting and after fixing make surface good as it is. |
| 103 | Supply and fixing in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 10 Sqmm complete |
| 104 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 105 | Schedule of Credit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender