Tender For Certain B/R Works At Icgs And Icgas Ratnagiri.
Tender Value
26 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
19 days left
EMD
52000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ratnagiri → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain B/R Works At Icgs And Icgas Ratnagiri.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out, complete all as specified and directed. |
| 2 | Excavation in post holes in soft/disintegrated rock (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 3 | Excavation in trenches, not exceeding 1.5 metres wide and not exceeding 1.5 metres in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, toe walls, kerb stones etc. not exceeding 10 sqm on plan and not exceeding 1.5 metres in depth and getting out in soft/disintegrated rock complete all as specified and directed. |
| 4 | Material and Labour for Plain cement concrete 1:4:8, type D2 using 40mm graded stone aggregate as in foundation, filling, concrete padding and mass concrete etc, complete all as specified and directed. |
| 5 | Material and Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed. |
| 6 | Supply and Fixing of Aluminium composite panel AL 33D having 3-4mm thick sheet panel with 0.3 mm aluminium coil thickness aluminium alloy AA3105 of approved texture (veneered pattern) and colour by Engineer-in-charge for Interior/exterior applications such as wall claddings, partitions, sign board fixed on Mild Steel /Galvanised Iron /Aluminium frame work by riveting/screwing or with bolts and nuts at 300mm c/c including filling the joints of each panel with silicone gel to match the colour of ACP panels for superior finish all along the periphery complete all as specified and directed.Note: The rate quoted includes fabrication of Mild Steel/Galvanised Iron/Aluminium frame work and fixing of ACP panels. |
| 7 | Material and Labour for printing with 3 metre radium reflective film and UV eco print by pressure sensitive adhesive backing on aluminium composite panel as in sign board for printing designs images, logos, fonts etc, as approved by Engineer in Charge. |
| 8 | Supply and Fixing of SS 304 grade swing type pole mounted twin dustbin/receptacles i.e. double pole and double trash receptacles with closed rotating lids to avoid intrusion of rain water, having full body with minimum sheet thickness of 1mm and above, weight 15kg and above for set of 02 receptacles, 80-100 litre capacity for each trash bin, design/model as approved by Engineer in Charge. |
| 9 | Supply and Fixing of PVC/ABS safety speed breaker/hump of height 75mm heavy duty load capacity suitable for any road types to withstand load up to 12 tonne, combination of black and yellow colours interlocked with each panels, including two highly visible reflectors on each side of every single panels, fixed to the existing ground surfaces irrespective of its conditions with SS screws etc, complete all as specified and design/model as approved by Engineer in Charge. |
| 10 | Supply and laying Precast RCC 3-seater outdoor/ benches with back rest & arm rest, suitable for children’s park, smooth finishes with two coats of acrylic emulsion coatings (weatherproof paint), having height 750mm and above made with concrete of superior grade such as M30 and above including reinforcement as required complete all as per design/model as approved by Engineer in Charge. |
| 11 | Removing excavated material exceeding 250 metres but not exceeding 500 metres and depositing where directed at a level not exceeding 1.50 metres above the starting point complete all as specified and directed. |
| 12 | Supply and Fixing of folding/rolling blinds of size 1.80 x 1.50 metres for windows of sizes 1.50 x 1.20 metres having blinds (set of two/double blinds) made of non-shrinkable double fabric zebra pattern, design, texture as approved by Engineer-in-charge having dust proof, UV resistance, medium opacity, PVC cord mechanism for rise and fall, sturdy top and bottom Aluminium tubular rails, equipped with cord tensioner to keep the cord tight against unwanted pull & unforeseen entangle especially for office use, including mounting and fixing of hardware such as pulling cord, blind shade, brackets, screws & fishers for hassle free installation complete all as specified and directed. |
| 13 | Supply and Fixing of Steel work in tubular trusses and vertical posts including special shaped washer, nut, bolt etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.- 240 complete including fixing and securing firmly the vertical members of truss to parapet wall of the building all as specified and directed. |
| 14 | Supply and Fixing of gusset plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, including nut bolt and washer without any attachment Fe 410-W(Grade E-250) quality A complete all as specified and directed. |
| 15 | Material and Labour for preparation of steel surfaces of any description over 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed. |
| 16 | Supply and Fixing of Pre- painted galvalume aluminium zinc coating Gl based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed. |
| 17 | Supply and Fixing of Pre- painted galvalume aluminium zinc coating Gl based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete all as specified and directed. |
| 18 | Supply and Fixing of 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 19 | Supply and Fixing of 110mm PVC (SWR) bends any radius complete all as specified and directed. |
| 20 | Material and Labour for application of polymer modified self-levelling compound to achieve required flatness and uniformity complete all as specified and directed. |
| 21 | Supply and applying of Sport Vinyl flooring 6.5 mm in badminton court marking as per prescribed dimensions through authorised applicator as approved by GE complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender