Tender For 84191/E8 Provision Of Artificial Rock Climbing Wall At Doom Dooma Under Ge (Af) Chabua
Tender Value
81.80 Lakhs
Estimated cost
Bid Submission
10 Aug 2026
23 days left
EMD
1.47 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dibrugarh → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For 84191/E8 Provision Of Artificial Rock Climbing Wall At Doom Dooma Under Ge (Af) Chabua
BOQ
| Sl. No. | Item Description |
| 1 | B/R SERVICES / WORKS :- |
| 2 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out as in soft / loose soil complete all as specified and directed. |
| 3 | Excavating over area not exc 1.5 m deep and getting out as in soft / loose soil complete all as specified and as directed. |
| 4 | all as per item No.1.002 here-in-before for additional 1.5 m or part thereof in depth beyond the first 1.5 m and getting out as in soft / loose soil complete all as specified and as directed. |
| 5 | Returning filling in including spreading, levelling, watering and well ramming in layers n exc 25cm complete all as specified and directed. |
| 6 | Removing excavated soil to a distance n. exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point complete, all as specified and as directed. |
| 7 | M&L for Plain Cement Concrete, 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified & directed. |
| 8 | M&L for Reinforced Cement Concrete, M-25 (Design MIX) (Using 20mm graded stone aggregate) as in footings, foundation beams, plinth beams; bases for coloumns, etc complete all as specified and directed. |
| 9 | M&L for mild steel TMT bars 8 mm dia and over cut to length, bend to shape required including cranking, bending spirally for hooping for column hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed. |
| 10 | Form work for rough finished surfaces of concrete(flat) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed. |
| 11 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 12 | M&L steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and as directed. |
| 13 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including necessary welding complete all as specified and as directed. |
| 14 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as sepcified and directed. |
| 15 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as sepcified and directed. |
| 16 | M&L for preparation of new surfaces of steel of any description over 10 cm width or girth not otherwise described and applying two coat synthetic enamel paint (1st grade quality) over a coat of red oxide zinc chrome primer complete all as sepcified and directed. |
| 17 | S&F for Mild Steel bolts round holding down of anchor bolts with nuts and washer plates complete all as sepcified and directed. |
| 18 | M&L for Brick Work in One or More Brick thick Walls with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, Built in Cement Mortar 1:6, complete all as specified and as directed. |
| 19 | M&L for 15mm thick rendering in Cement mortar 1:4 on brick wall or concrete surface finished even & fair complete (without using extra cement) complete all as specified and directed. |
| 20 | M&L for filling loose sand under floors as in sand pit complete all as specified and as directed. |
| 21 | Designing, Providing & fixing polyester resin fibre glass reinforced 3D/ 2D panel with minimum 6mm thickness at center & 10mm at flanges .3D panels are modular in shapes and 2D Panels are flat in shapes. Panels shall have provision of insert holes @ minimum four nos per square meter for fixing holds, arrangement for fixing holders/ protection points/ belay points and arrangement at top for fixing security system (chain anchors) at top. The panels should be able to withstand climbers weight, weather proof for outdoor use and meet norms as per climbing STANDARDS. The panel will have sand finish on one side with slight abrasion on climbing side. Overhang and other standard should be as per drawing and as directed by designer. Wall should be so designed that it can be used for multipurpose training such as begineer/ intermediate/ advance level and climbing competition. The make of the panels should be from Baam Dveloper/XLimitz/Wild Ventures. Face 1(12x5 Mtr) - 3D Panels Face 2(12x3 Mtr) - 2D Panels Face 3(12x3 Mtr) - 2D Panels (Rappelling) |
| 22 | Supply and fixing Stainless Steel imported chanin anchors complete all as specified and as directed. |
| 23 | Supply and fixing Movable Climbing holds complete all as specified and as directed. |
| 24 | Supply only 10 mm dia Climbing Rope complete all as specified and as directed. |
| 25 | Supply only Harness complete all as specified and as directed. |
| 26 | Supply only Screw carabiners complete all as specified and as directed. |
| 27 | Supply only Fig. of 8 complete all as specified and as directed. |
| 28 | Supply only Quickdraws complete all as specified and as directed. |
| 29 | Supply only GRI - GRI complete all as specified and as directed. |
| 30 | Supply only Belay Glove complete all as specified and as directed. |
| 31 | SCHEDULE OF CREDIT |
| 32 | DEDUCT 'TOTAL AMOUNT OF CREDIT' AGAINST 'SCHEDULE OF CREDIT'However for this Tender credit amount is 'NIL' Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender