Tender For Repair/ Maintenance To Fencing, Hardstanding, Chequered Tiles, Paver Block And Other Connected Works For Zone Ii B Under Age (I) Nyoma
Tender Value
9.98 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
18 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nyoma → Jammu And Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/ Maintenance To Fencing, Hardstanding, Chequered Tiles, Paver Block And Other Connected Works For Zone Ii B Under Age (I) Nyoma
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground,complete all as specified and as directed by Engr-in-charge. |
| 2 | S & F in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured), complete all as specified and as directed by Engr-in-charge. |
| 3 | Restraining & resecuring inclduing making good staples of galvanised steel barbed wire of any description and any type, complete all as specified and as directed by Engr-in-charge. |
| 4 | Dismantling fencing wire mesh, any type, complete all as specified and as directed by Engr-in-charge. |
| 5 | Supply only Chain link MS galvanisd fencing, any size or type, complete all as specified and as directed by Engr-in-charge. |
| 6 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and as directed by Engr-in-charge. |
| 7 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, diameter of neck 5-10 mm, complete all as specified and as directed by Engr-in-charge. |
| 8 | S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and as directed by Engr-in-charge. |
| 9 | M&L PCC 1:3:6 type C2 (using 40 mm graded aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases), complete all as specified and as directed by Engr-in-charge. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed by Engr-in-charge. |
| 11 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed by Engr-in-charge. |
| 12 | M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed by Engr-in-charge. |
| 13 | M & L for preparation of old of steel of any description , over 10 cm in width or girth not otherwise described applyingone coats of synthetic enamel paint , complete all as specified and as directed by Engr-in-charge. |
| 14 | Demolition of PCC block masonary, stone /boulder masonry, built in any type of cement mortar including all quoins, arches, pillars, etc., but including ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed by Engr-in-charge. |
| 15 | M & L for Precast cement concrete 1:3:6 type C-1, (20mm graded crushed stone aggregate) block masonary with solid blocks built in cement mortar 1:6, complete all as specified and as directed by Engr-in-charge. |
| 16 | M&L PCC 1:2:4 type B-1 using 20mm graded stone agg as in coping to retaining wall / drains / manholes, complete all as specified and as directed by Engr-in-charge. |
| 17 | M & L rendering 15mm thick on fair faces of stone/concrete work in CM 1:4 incl finished even and smooth without using extra cement , complete all as specified and as directed by Engr-in-charge. |
| 18 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced), complete all as specified and as directed by Engr-in-charge. |
| 19 | M&L for 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing & finished the surface even & fair, complete all as specified and as directed by Engr-in-charge. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by Engr-in-charge. |
| 21 | M&L for chequered cement concrete tiles 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, complete all as specified and as directed by Engr-in-charge. |
| 22 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar, complete all as specified and as directed by Engr-in-charge. |
| 23 | M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed by Engr-in-charge. |
| 24 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and pigment, complete all as specified and as directed by Engr-in-charge. |
| 25 | M & L for providing, cement concrete Type B-1, 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and as directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender