Tender For Laying Of Paver Block And Installation Of Light At Jalwabad Kabristan,Under Nagar Panchayat Koderma Ward 02
Tender Value
24.89 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
10 days left
EMD
49800
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Koderma → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Laying Of Paver Block And Installation Of Light At Jalwabad Kabristan,Under Nagar Panchayat Koderma Ward 02
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | Supply of fine agreegate/stone dust -do- -do- all complete job. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement: 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge) |
| 5 | Providing and Laying factory made chamfered edge cement concrite paver block in footpath and lawns drive way or light or traffic parking etc. of required strength , thickness and size and shape made by table vibratory mathod using pu mould -do-do- all complete job as per specification and direction of E/I 80mm thick cement concrete paver block of M-30 grde with |
| 6 | Swaged steel tubular pole (410SP-2) of height 7 mtr. Onfirming to IS :2713 (part II) in threesection with steel base size, bottom of the pole made of 50 mm dia MSB clamp pipe welded to 300mm long MS canopy of suitable dia at an angle of 102.5 suitable size of nuts and bolts including rating of one cost steel primer and two coat or read - oxide all complete as required . (without Arm) |
| 7 | Double Arm 1x2 Meter long. |
| 8 | S.I.T.C of floowing rating LED Street lighting luminarie with pressure die cast housing and toughened glass cover (IP 66 protection) in existing pole/pipe for supply voltage 100-270V AC, 50Hz. Luminarie shall be confirm to IS: 10322 part-5/section -3 and shall be complete with allneccssary accessories as required 90/100 watt led street light |
| 9 | Supply and drawing following sizes of FR PVC insulated copper conductor, Three core coppercable in the existing surface/recessed Steel/ PVC condduit as reqd. A 2 x 2.5 aqmm |
| 10 | Supply of XLPE insulated PVC sheathed heavy dutty, armoured electrical cable with aluminium conductor for working voltage up to 1100 volts. Including conforms to IS: 7098, part-1 ) (A) 4 core 16 sqmm |
| 11 | Providing and supplying in standard lengths High Density Polyethylene Pipe (HDPE Pipe) confirming to IS 4984/14151/ 12786 / 13488 (Latest Revision with necessary jointing materials like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joints excluding coupler / specials and taxes). providing standard length high dkensithy polythene pipe |
| 12 | Outdoor stand mounted feeder panel with 32amp TPN MCB incomer, 45 amp TP contactor automatic switching of liuminaries, power tool control incommer outgoing terminal etc as reqd. |
| 13 | Earthing with copper earth plate 600mm x 600 mm x 3mm thick inculding accessories, andproviding masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 14 | Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required . |
| 15 | Earthwork for 2.6X2.6X2.6 (Foundation) excavating and refilling |
| 16 | Reinforced cement concrete work in beams, 5.3.9.1 suspended floors roofs having slope up to15° landings, balconies, shelves, chaljas, lintels, bands plain window sills, starcases and spiral |
| 17 | Foundation bolt of size M-16 450 mm |
| 18 | (CARRIGE OF MATERIALS )Cement |
| 19 | Stone Chips |
| 20 | add 18% gst |
| 21 | Add 1% labour cess |
| 22 | Photography and Board Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender