Tender For Certain Repair Works To Toilets And Bathrooms And Sanitary Fittings At South Side Of Runway In Tech Area Under Age B/R (P) At Af Stn Jodhpur
Tender Value
35 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
17 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair Works To Toilets And Bathrooms And Sanitary Fittings At South Side Of Runway In Tech Area Under Age B/R (P) At Af Stn Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repairs CP bib tap, fancy type, with wall flange, 15mm bore, cast copper alloy with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 2 | S&F in repairs CP pillar taps, fancy type, 15mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 3 | S&F in repairs vitreous china wash basin, white, flat back, size 550mm x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and as directed by Engineer-in-Charge. |
| 4 | S&F in repairs sink with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 5 | S&F in repairs sink made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 6 | S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litres capacity, low level, white, with intel, ball valve, float and handle including brackets complete all as specified and directed. |
| 7 | S&F in repairs 600mm x 450mm mirror of selected quality glass 5 to 6 mm thick and fixed to walls with necessay PVC frame complete all as specified and directed. |
| 8 | S&F in repairs mirror of 5 to 6 mm thick glass with double coat of protection and longevity grounded edges for safety and silver plating on the back for better reflection including with stainless steel decorative fastener/ studs complete all as specified and directed. |
| 9 | S&F in repairs stop valves/ angle valve 15mm bore, fancy type, CP, cast copper alloy screwed down high presure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 10 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) white including necessay fitting etc. complete all as specified and as directed. |
| 11 | S&F in repairs vitreous china squatting pan of orissa pattern, size 580mm x 440mm, white with `P' or `S' trap, front or back inlet and integrated foot rests, including provision of cement concrete bedding complete all as specified and directed. |
| 12 | S&F in repairs vitreous china urinal, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, with grating and union for discharge pipe and PVC waste pipe, including making all connections to existing connections, fixed complete all as specified and directed. |
| 13 | S&F in repairs brass chromium plated urinal spreader, fancy type of approved quality fixing with 15mm dia pipe complete all as specified and directed. |
| 14 | S&F in repairs 15mm bore pillar taps of PTMT of any colour, high pressure, screwed for iron pipe and fixed (minimum weight 15mm-110gms) complete all as specified and directed. |
| 15 | S&F in repairs angle valve/ stop valve of PTMT of any colour, high pressure, screwed for iron pipe and fixed (minimum weight 15mm-90gms) complete all as specified and directed. |
| 16 | S&F in repairs for 15mm bore bib tap standard of PTMT of any colour, fancy type, high pressure, screwed for iron pipe and fixed (minimum weight 15mm-105gm) complete all as specified and directed. |
| 17 | S&F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight for 20mm-210 gms) complete all as specified and as directed. |
| 18 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 19 | S&F in repairs health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified and directed by Engineer-in-Charge. |
| 20 | S&F in repair CP grating of size 100mm dia with/ without waste hole complete all as specified and as directed. |
| 21 | S&F CPVC pipes 20mm dia (outer dia) SDR 11 and plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including taking down old u/s pipe complete all as specified and directed. |
| 22 | S&F CPVC pipes 25mm dia (outer dia) SDR 11 and plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including taking down old u/s pipe complete all as specified and directed. |
| 23 | S&F in repairs 32mm dia, 800mm long flexible PVC waste pipe complete all as specified and as directed. |
| 24 | S&F in repairs 38/ 40 mm dia, low density polyethylene pipe upto 1.00 metre long, suitable for flushing cistern, etc. with necessary fittings complete all as specified and as directed. |
| 25 | S&F in repairs 110mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 26 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 27 | S&F in repairs for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 28 | S&F in repairs PVC (SWR) bends of any radius, 75mm dia complete all as specified and as directed. |
| 29 | S&F in repairs PVC (SWR) bends of any radius, 110mm dia complete all as specified and as directed. |
| 30 | S&F in repairs 15mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 31 | S&F in repairs one piece EWC with seat cover and twin flush fittings of size 640mm x 350mm x 725mm of snow white colour including 220mm S/P trap complete all as specified and directed. |
| 32 | S&F in repairs counter top wash hand basin of size 520mm x 450mm x 200mm of snow white colour including all necessay fittings etc. complete all as specified and directed. |
| 33 | S&F in repairs 15mm bore CP wall mixer (3-in-1) for mixing hot and cold water with arrangement for both telephonic hand shower and overhead shower with long bend pipe complete all as specified and directed. |
| 34 | Demolition of cement concrete in ground floors and pavings not exc. 15 cm thickness (below or above ground level) and disposing of debries outside MD land complete all as specified and as directed. |
| 35 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 36 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge. |
| 37 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including hangers etc. complete all as specified and directed. |
| 38 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete block walling complete all as specified and as directed. |
| 39 | Dismantling of old unserviceable, rusted, broken (corrugated/ semi corrugated, etc.) asbestos cement/ any type of sheets in ridge and roof coverings complete all as specified and as directed by the Engineer-in-Charge. |
| 40 | Taking down chowkats or frames with shutter (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed. |
| 41 | Taking down chowkats or frames with shutter (without taking off shutters from the frame) exceeding 1.5 Sqm but not exc. 4.0 Sqm each complete all as specified and as directed. |
| 42 | M&L for precast cement concrete (1:3:6) type C1 (using 20mm graded stone aggregates) block masonry with solid blocks, exceeding 10cm in width and setting in cement mortar (1:6) including demolition of old u/s blocks complete all as specified and as directed. |
| 43 | M&L for PCC (1:3:6) type C1 (using 20mm graded stone aggregates) in cills, steps, bands, copings, bed plates, blocks for inserting hold fasts etc. and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engineer-in-Charge. |
| 44 | M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in CM (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 45 | M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick, stone or concrete surfaces, finished even and smooth without using extra cement complete all as specifed and as directed. |
| 46 | M&L for 35 to 40 mm thick precast RCC jallies of pattern as approved including frame, balusters, bressumers, kneelers, string courses fixing in any position with CM (1:4) including demolition of old jallies and thrown outside MD land complete all as specified and directed. |
| 47 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 48 | M&L for preparation of new surface and finishing walls with two coats of acrylic smooth exterior paint with required shade over a coat of primer complete all as specified and directed. |
| 49 | M&L for preparation of old surfaces of wall by applying 2 to 3 mm thick white cement base putty in patches as required and applying two coats of oil bound distemper complete all as specified and directed. |
| 50 | S&F framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 Gde E-165 including dismanting of old u/s existing MS work complete all as specified and as directed by Engineer-in-Charge. |
| 51 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise discribed and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 52 | S&F in repairs 20mm dia with 1.00 mm wall thickness curtain rod in any length, high strength stainless steel pipe including required bracket/ finials complete all as specified and as directed. |
| 53 | M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates) in sub floors complete all as specified and as directed by the Engineer-in-Charge. |
| 54 | M&L for vitrified, light shade, coloured tiles, 9 to 10 mm thick (squares/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 1.00 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour/ shade of tiles, laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortor (1:6) complete all as specifed and directed. |
| 55 | M&L for coloured non skid ceramic tiles 7 to 8 mm thick (squares/ rectangular), area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour/ shade of tiles, laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortor (1:6) complete all as specifed and directed. |
| 56 | M&L for vitrified light shade coloured tiles 9 to 10 mm thick (squares/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 1.00 Sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour/ shade of tiles, laid over and including 10mm thick plastering in CM (1:4) as in backing coat of tiles complete all as specifed and directed. |
| 57 | M&L for glazed ceramic coloured tiles of size 350mm x 250mm x 7mm/ 450mm x 300mm x 7mm/ 300mm x 600mm x 7mm thick, laid over and including 10mm thick rendering in cement mortar (1:4) as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour/ shade of tiles complete all as specifed and directed. |
| 58 | M&L for granite of 18 to 20mm thick, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including screed layer of 15mm thick in CM (1:4) complete all as specified and as directed. |
| 59 | M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base complete all as specified and as directed. |
| 60 | M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design and pattern as in foot path, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter-locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 61 | S&F for pre-painted galvalume aluminium zinc coating GI based corrugated trapezoidal shape steel sheet 0.50mm of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 62 | S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed. |
| 63 | S&F for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed. |
| 64 | S&F rotational moulded polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule including taking down old one complete all as specifed and directed. |
| 65 | S&F rotational moulded polyethylene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule including taking down old one complete all as specifed and directed. |
| 66 | S&F factory made single extruded WPC (wood polymer composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of size 45mm x 85mm/ 75mm x 50mm single rebated comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ Cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and as directed by Engineer-in-Charge.Note:- 1. M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.2. For WPC solid door/ window frames, minus 5.00 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. 3. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 67 | S&F factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class 'A' category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed by Engineer-in-Charge.Note:- Stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 68 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with particle board core with 2, 4, or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face and 2mm prelaminated PVC sheet on back face complete all as specified and directed. |
| 69 | S&F factory made solid panel PVC door shutter, 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded wood grain printed PVC sheet used instead of plain colour PVC sheet and 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as per specification and drawing complete all as specified and as directed. |
| 70 | S&F butt hinges medium weight, cold rolled mild steel of size 100mm complete all as specified and directed. |
| 71 | S&F aluminium anodised barrel tower bolt of extuded section and fixed of 150mm long complete all as specified and directed. |
| 72 | S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 73 | S&F extruded aluminium alloy handle fabricated type, anodised, 150mm long complete all as specified and directed. |
| 74 | S&F in repairs 12mm thick WPC (wood polymer composite) board with CNC approved pattern/ design cutting of approved colour with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position including all necessary fittings, adhesive, sealant etc. complete all as specified and directed. |
| 75 | S&F in repairs for 3 to 4 mm thick coloured ACP sheet cladding over MS frame work or any other surfaces including making necessary arrangement for light, vertical, horizontal offset of any size/ any pattern complete all as specified and directed. |
| 76 | S&F in repairs for powder coated GI grid frame work of size 605mm x 605mm for false ceiling fixed with screws, suspended with 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleates made out of GI flat 40mm x 3mm, size 60mm long complete all as specified and as directed by Engineer-in-Charge. |
| 77 | S&F 5 to 6 mm thick PVC ceiling board fixed in flat surfaces on snap grid frame work complete all as specified and directed. |
| 78 | S&F solid PVC wall lining consisting of 5mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 79 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 80 | S&F in repairs for venetian blinds, vertical/ horizontal type, 100mm wide with polyester fabric of approved colour and pattern with aluminium fittings, and top rail and nylon buttons/ loops etc., fixed cuttings and alteration if necessary wherever AC/ coolers exists complete all as specified and as directed. |
| 81 | M&L for factory made vitrified heavy duty parking tiles coloured, matt finish, unglazed and unpolished of size 300mm x 300mm x 10mm thick, laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 82 | S&F in repairs fancy type overhead shower of size minimum 140mm and above with necessary fittings complete all as specified and directed. |
| 83 | S&F in repairs 600mm long stainless steel towel rack with lower hangers complete all as specified and directed. |
| 84 | S&F in repairs toilet roll holder with stainless steel flap complete all as specified and directed. |
| 85 | S&F in repairs for towel ring square with round flange complete all as specified and directed. |
| 86 | S&F in repairs soap dispenser with glass bottle complete all as specified and directed. |
| 87 | S&F in repairs corner glass shelf with bracket complete all as specified and directed. |
| 88 | S&F in repairs 18/ 19 mm thick PVC moulded solid board, decorative of approved colour for cabinet boxes, shutters etc. with shelf and shutters full size fitted including coloured topping on all exposed edges all as per manufacturer's specifications and drawings complete all as specified and directed by Engineer-in-Charge. |
| 89 | S&F in repairs continuous (piano) hinges, width of flap 30mm mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 90 | S&F in repairs stainless steel handles 75mm long complete all as specified and as directed by Engineer-in-Charge. |
| 91 | S&F in repairs magnet catches fitting fixing at site with necessary arrangement, screws, strikes etc. complete all as specified and directed. |
| 92 | S&F in repairs PVC bathroom mirror cabinet of size 350mm x 450mm x 150mm, 1st quality fixed with necessary screws complete all as specified and directed. |
| 93 | S&F in repairs 15mm bore, 2 way CP bib cock with wall flange complete all as specified and directed. |
| 94 | S&F 15mm borte GI tubing, medium grade, with all fittings, fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. |
| 95 | S&F 20mm bore GI tubing, medium grade, with all fittings, fixed to walls, ceiling or laid in floors including taking up or down existing unserviceable steel tubing and connections complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender