Tender For Height Raising Work Of 132Kv Sarnath- Cantt Line For Crossing Of Proposed Elevated Road Between Loc No. 10 & 11 With Cost Of All Material & Work Under
Tender Value
36.11 Lakhs
Estimated cost
Bid Submission
06 Aug 2026
23 days left
EMD
43000
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Height Raising Work Of 132Kv Sarnath- Cantt Line For Crossing Of Proposed Elevated Road Between Loc No. 10 & 11 With Cost Of All Material & Work Under
BOQ
| Sl. No. | Item Description |
| 1 | SUPPLY |
| 2 | ACCESSORIES |
| 3 | Tower Accessories as UPPTCL Standard |
| 4 | Number Plate |
| 5 | Danger plate |
| 6 | Phase Plate in Set of Red,Blue and Yellow |
| 7 | Bird guard |
| 8 | Earthing material Pipe type |
| 9 | Circuit Plate |
| 10 | Conductor Accessories Suitable for HTLS Conductor |
| 11 | Vibration Dampers |
| 12 | Mid Span compression Joint |
| 13 | Repair sleeves |
| 14 | Preformed Armour Rod |
| 15 | Connectors and other Accessories |
| 16 | Hardwares & Insulator Accessories for Conductor |
| 17 | SINGLE SUSP.FTTG |
| 18 | SINGLE TENSION FTTG |
| 19 | SINGLE SUSP. FTTG For PILOT STRING |
| 20 | DOUBLE TENSION.FTTG |
| 21 | COMPOSITE SILICON-RUBBER INSULATOR STRING |
| 22 | 70KN SUITABLE FOR 132KV SUSPENSION FITTING |
| 23 | 120KN SUITABLE FOR 132KV TENSION FITTING |
| 24 | Supply of Earth Wire |
| 25 | 7/3.25MM GS EARTHWIRE |
| 26 | Earth Wire Accessories |
| 27 | SUSPENTION CLAMP |
| 28 | TENSION CLAMP |
| 29 | VIBRATION DAMPER |
| 30 | COPPER BOND |
| 31 | (ERECTION WORK) |
| 32 | Details survey of following line due to infrengement in aligment of Proposed elevated Road by Setu-Nigam .This work includes route alingement of proposed Line, preapration of profile, tower schedule, schedule of materials, marking of of location (Route length), GPS survey of line, with co-ordinates of each tower (length of the line shall be authenticated by GPS Survey).All NOCs (Safety etc) required for erection/charging of the line has to obtain by the contractor and all ROW has to solve by the contractor including collecting of forms, completion of all required documuntations,submission in triplicate to respective offices including clearance from revenue department has to be done by the firm. |
| 33 | Check Survey |
| 34 | Soil investigation (All kind of Soil) |
| 35 | Cost of excavation of 220 KV tower foundation pits including all earth work, backfilling levelling etc |
| 36 | Setting of stubs including all foundation work but excluding the cost of concerting and excavation (Rate per location) for following towers. The work also includes carriage of material from the store to the site. |
| 37 | STUB-SETTING(220 KV B MC) |
| 38 | Cost of concreting of all type of tower foundation including cost of cement, dewatering, shoring and shuttering, forming, curring but excluding cost of reinforcement bars |
| 39 | 1:2:4 concreting |
| 40 | 1:3:6/PCC concreting |
| 41 | Erection of superstructure of 220KV Towers and Anchor tower and their extensions wherever required including all work above ground level excluding hoisting of insulators, hardware & accessories, but including fitting of danger, number, phase plates, bird guard and fixing & punching for 220 KV MC lines names (additional Box Type Cross arm 6 No.). The work also includes carriage of material from the store to the site. |
| 42 | Tack welding of all the bolts up to the height of one section of the tower or 5 meter from ground levvel whichever is higher with three tacks at 1200 seperation of minimum 10 mm thickness with 10mm/12mm electrode & application of Zinc rich Aluminium paint of the affected surface including cost of all material including tack welding of river crossing tower & Anchor towers. |
| 43 | Installation of steel reinforcement bars in RCC foundation including cost of steel reinforcement bars with cutting bending placing dinding etc. |
| 44 | Laying, stringing, tensioning clamping, jointing etc of all 3 phases of HTLS conductor including hoisting of insulators, fitting of all necessary hardware and accessories i.e. fitting Armour rods, vibration dampers etc, on all Six phases of 132 KV Lines . The work also includes carriage of material from the store to the site, identification of LT lines and shut down clearances from discom. |
| 45 | Laying, stringing of 7/10 SWG EW including fixing of all kind of hardwares on 132kv line.(Panther/HTLS). The work also includes carriage of material from the store to the site, identification of LT lines and shut down clearances from discom. |
| 46 | Grounding work including earthwork etc for Pipe type grounding including cost of coke & salt. The work also includes carriage of material from the store to the site. |
| 47 | Dismantaling of all 3 phase of existing HTLS conductor, all hardware fitting & conductor accessories e.g. armour rod, vibration damper, insulator string etc. of existing line and re-rolling of dismantled conductor on empty drum for re-use, safly transportation of all removed material to UPPTCL stores.existing tower with conductor and opgw and shifting it to store Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender