Defence Statutory Bodies & Commissions/Committees Closing in 22 days TDR #56406030

Tender For Upgradation Of Security Wall/ Fence Around Tech Area And Unit Area Of 14 Inf Div Ord Unit.

Issued by Statutory Bodies & Commissions/Committees · Dehradun, Uttarakhand
Tender Value
42.90 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
22 days left
EMD
85800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Upgradation Of Security Wall/ Fence Around Tech Area And Unit Area Of 14 Inf Div Ord Unit.

BOQ

Name of Work:- UPGRADATION OF SECURITY WALL/ FENCE AROUND TECH AREA AND UNIT AREA OF 14 INF DIV ORD UNIT.
Sl. No. Item Description
1Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr depth for foudations etc or for column footings, manholes etc not exceeding 10 Sqm on plan and not exc 1.5 mtr in depth and getting out in hard/dense Soil complete all as specified
2M&L for cement concrete type D-2 1:4:8 (using 40 mm graded crushed stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed.
3Returning & filling with excavated soil obtained from item No-1, in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thicks as in soil
4Removing excavated material (Hard dense soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
5Demolition of brick work built in cement mortarincluding all quoins arches pillar etc
6Taking down cement plaster of any description including racking out joints hacking for key scrubing down with water etc
7Dismentaling of wrought iron or mild steel work of any descrpition not otherwise provided for
8Brick work using sub class “B” bricks straight or curved on plan exc 6 metre mean radius built in CM 1:4 ( Old size brick) complete all as specified and directed.
9M&L for rendering 15 mm thick in Cement mortar (1:4) on fair faces of stone masonary/concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed
10M&L for rendering 15 mm thick in Cement mortar (1:4) on unfair faces of stone masonary/concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed
11Preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coat of synthetic enamel paint with approved shade over a coat of red oxide primer complete all as specified and directed
12Preparation of old steel surfaces of any description, over 10 cm in width or girth and applying two coat of synthetic enamel paint with approved shade over a coat of red oxide primer complete all as specified and directed
13M & L Framed work such as grills, gratings, etc.. with ends of barsshouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as directed.
14M&L for preparation of new ssurface and applying two coats of weather proof exterior emulsion paint (Apex of Asian, weather coat of Berger) of tint over a priming coat on wall, chajjas, facia etc complete all as directed.
15M&L for preparation of old surface of wall and applying two coats of weather proof exterior emulsion paint (Apex of Asian, weather coat of Berger) of tint t on wall, chajjas, facia etc complete all as directed.
16Providing, cement concrete in type B-1 1:2:4 (20 mm graded aggregate ) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles andthroating, as directed
17Removing of existing galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs complete all as specified and directed.
18S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts , including,securing or tying at crossings with and Provision of galvanised mild steel wire, staples or steel pins etc. as directed ( each line wire to be measured) complete all as specified and directed.
19S&F Concertina coil fencing with punched tape concertina coil 600mm dia streched to 6 metre length, having 50 Nos spiral turn per 6 metre length spring core wire (2.59 mm thick) of high tensile strength of 1620N/sqmm with tape (0.52mm thick) Hot dip galvanised upto 20 microns, weight of each coil 8.50 kg and fixing the same on existing Y-shaped angle iron with 6 horizontal R.B.T. (Reinforced Barbed Tape) wire, stud tied with G.I. staples and G.I. Clips to retain horizontal clips shall be @ 05 nos per 02 Nos spiral turns approximate 125 clips per coil including neccessary bolts complete all as specified and as diected.
20Taking down existing steel frame and refixing to opening all as specified and directed by Engr in Charge
21S&F 450 mm bore of pipe Reinforceed concrete pipes class NP 3laid and jointed with collers incl road cutting atany depth and packing,haunching of soil complete all as specified.
22NOTES :-1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56406030
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 42.90 Lakhs
LAST DATE 03-08-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Upgradation Of Security Wall/ Fence Around Tech Area And Unit Area Of 14 Inf Div Ord Unit.
Basic Detail
Tender No GE/CLT/ Of 2026-27
Bidding Type Tender
Location
City Dehradun
State Uttarakhand
Key Dates
Publish Date 10 Jul 2026
Submission Date 03 Aug 2026
Open Date 10 Aug 2026
Finance
Tender Value 42.90 Lakhs
Tender Fee 500
EMD 85800
Exemption Available
Document List
BOQ_871101.xls
c6259c4a-a72e-4922-8c72-2e3d0af00f2d.html
Tenderdocs8106.pdf
Tendernotice_1 (5).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 22 days
Aug 10, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 29 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_871101.xls

html

c6259c4a-a72e-4922-8c72-2e3d0af00f2d.html

pdf

Tenderdocs8106.pdf

pdf

Tendernotice_1 (5).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders