Tender For Repair To Footpath, Road Side Berms, Kerb Stone And Road Furniture, Culvert, Hard Standing Etc In Certain Areas Under Age B/R-I Of Ge (N) Mamun
Tender Value
40 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Footpath, Road Side Berms, Kerb Stone And Road Furniture, Culvert, Hard Standing Etc In Certain Areas Under Age B/R-I Of Ge (N) Mamun
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of brick work built in cement mortar including all quoins, arches, pillars etc and removal of debris out off the premises etc complete all as specified and directed. |
| 2 | M&L for Brick work with fly ash bricks (Old Size bricks), sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:4 complete all as specified & directed. |
| 3 | All as per Srl item No 2 here-in-above but except bricks (using old servicable bricks) complete all as specified & directed. |
| 4 | M&L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed |
| 5 | All as per Srl item No 4 here-in-above but except bricks (using old servicable bricks) complete all as specified and directed |
| 6 | Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed. |
| 7 | M&L for 15mm thick cement plaster in CM 1:4 on brick masonary surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 8 | M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 9 | M&L for preparation of old surface of walls and applying one coat of cement base paint over one coat of primer complete all as specified and directed |
| 10 | M&L for preparation of old surface and applying one coat of exterior emulsion paint Ist quality on wall, kerb stone, etc complete all as specified and directed. |
| 11 | M&L for Preparation of new cement surface and applying two coats of exterior emulsion Ist quality on wall coping and kerb stone over a coat of white chalk complete all as specified and directed |
| 12 | Demolition of cement concrete un-reinforced of any description and in any position complete all as specified and directed |
| 13 | M & L Precast interlocking paver blocks factory made confirming to IS-15658-2006 of 60mm thick grade of concrete M-35 with cement and coloured pigment (topping thickness not less than 5mm thick with white cement and colour pigment non fadable with epoxy coating) complete all as specified and directed. |
| 14 | M & L Precast interlocking paver blocks factory made confirming to IS-15658-2006 of 80mm thick grade of concrete M-35 with cement and coloured pigment (topping thickness not less than 5mm thick with white cement and colour pigment non fadable with epoxy coating) complete all as specified and directed. |
| 15 | M&L for 75mm thick PCC 1:3:6 Type D2 (using 40 mm graded crushed stone aggregate) as in sub base to paving complete all as specified and as directed. |
| 16 | M&L 25mm thick sand filling in floors or paving including levelling, watering and consolidation complete all as specified and as directed. |
| 17 | Dismantling and refixing of existing undulated interlocking tile (paver) of any thickness including sand cushioning of any description, providing PCC sub base 1:4:8 Type D-1 (using 20mm graded crushed stone aggregate) to make up maintain with adjacent sub base top level, laying same interlocking tiles and sand cushioning as per site condition complete all as specified and directed. |
| 18 | M&L for Solid Precast Cement Concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in road side kerb stone chamfered on edges, including demolition and removing materials out side MoD land & etc complete all as specified and directed |
| 19 | M&L for PCC 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) as in cills, steps; seismic Cum and othe similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, fillet, gola, water troughs and the like including weathering, slighth rounded or chamfered angles and throating complete all as specified and directed. |
| 20 | M&L cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed. |
| 21 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, rubbish off the premises complete all as specified and directed. |
| 22 | M&L for Providing, precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), as in cover slabs (for septic tanks, manholes) and similar articles including necessary moulds/fromwork set in cement mortar (1:6) complete all as specified and directed. |
| 23 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed. |
| 24 | Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete including taking out embedded portion, making good disturbed ground and removal of rubbish complete all as specified and directed. |
| 25 | S&F in repairs galvanised 2 strand steel barbed wire 2.24 mm dia barded with 2mm dia wire at 75 mm spacing, straining and fixing to any type of standard rail, standard bolts including securing or tying at crossing with galvanized mild steel wire staple or steel pins complete all as specified and directed. Note: Each line of wire to be measured separately. |
| 26 | Dismantling of fencing, wire mesh of any type and in any position by unscrewing nuts fillets, clamps etc complete all as specified and directed. |
| 27 | Supply only 4.00 mm dia, galvanized steel wire chain link fencing 50mm x 50 mm mesh, including binding wire / line wire etc complete all as specified and as directed. |
| 28 | Fixing only 3.15 mm dia, galvanized steel wire chain link fencing 50 mm x 50 mm mesh, fixed to RCC fencing post with bolts etc including fixing of binding wire / line wire, Mild steel round bar etc complete all as specified and directed. Note :- Supply of Galvanized steel wire chain link fecncing, Mild steel round bars, Mild steel flat iron, Nuts, Bolts & Washers will be measured and paid for separately. |
| 29 | S&F Mild steel screw bolt (machine made) with hexagonal or square heads at one end, screwed the other or screwed both ends. Each screwed end to be fitted with two washers and one hexagonal or square nut exc 5 cm but not exc 10cm long (dia of shank 12mm) complete all as specified and directed. |
| 30 | Supply only 10 mm dia mild steel round bars as in stiffener to chain link fencing including necessary cutting bending etc. conforming to Grade-I, IS 432-2000 (Part-I) complete all as specified and as directed. |
| 31 | S&F Frame work such as door or gates etc, including hooks, hold fast, locking, hanging arrangement, fastening and fixing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. complete to similar work conferming to Fe-290 Gde E-165 including dismantling old complete all as specified and directed. |
| 32 | M&L for PCC 1:4:8 Type D-2 (using 40mm graded stone aggregate) as in mass concrete, sub base to paving complete all as specified and directed. |
| 33 | Dismantling of reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required and removal complete all as specified & directed. |
| 34 | M&L for 300 mm bore reinforced cement concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 35 | M&L 150mm thick concrete bed to drain pipes including forming cadles in cement concrete 1:3:6 type C2 using 40mm graded crushed stone aggregate of over pipes complete all as specified and directed. |
| 36 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc. complete all as specified and directed. |
| 37 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand and similar work conforming to Fe.290 Gde-E-165 including dismantling of existing steel work complete all as specified & directed. |
| 38 | M&L for preparation old steel or iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 39 | M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 40 | M&L green Marble work 18-20mm thick (table rubbed and polished) in cooking plateform, window cill, steps, stair case trade & riser etc in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of including demolition of existing bhaislana Zebra complete all as specified |
| 41 | S&F of precast cement concrete Type B-0 1:2:4 (12.5mm graded crushed stone aggregate) louvres and jallies, 25mm thick (measured solid), set in cement mortar 1:4 including all mouldings and demolition of old jallies, removal of rubbish complete all as specified & directed. |
| 42 | Taking out brick bats, pebbles, muds, clay sludge, cleaning of drains by removing silt, etc from the bottom of drain and culvert bed, removing to a distance not exc 50 m and deposited complete all as specified and directed. |
| 43 | M&L for 9 to 12 mm thick endura heavy duty Industrial tiles (sqaure/ rectangular), area of each tile exc 0.08 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15 mm thick screed bed or bedding layer mortar in CM 1:4 including dismantling of old tiles of any description with bedding layer of mortar and removal of rubbish complete all as specified and as directed. |
| 44 | M&L Road Marking (Thermoplastic) Hot Thermoplast and cold solvent based marking machines used for making of roads, Highways,spots field, airports etc. They are used to mark straight as well as curved lines with accurate prevision to eliminate human error. Thermoplastic paint material conforming to BS specifications as per IS '164 Grade -I. |
| 45 | Supply & fixing Guide posts ABS round body fitted with twin reflectors made out of MS pipe of 50mm dia and mounted on ovel shape metal plate of dimensions 303x167mm fitted with two nos. 110mm dia high reflective reflectors on both the sides along with two nos 70x23mm rectangular reflactors each sides for excellent reflectivity in the night hours all specified and directed. |
| 46 | Taking down & Refixing delineator of any size and type including drilling holes and grouting in CM 1:2 and finish the surfaces as per existing finishing all as directed by Engineer in charge. |
| 47 | Supply & fixing solar road stud 125 x 125 x 25 mm (Model DA 110- DHRUV) made from Aluminium alloy and construction. Solar powered by monocrystal solar panel. Type of battery. One high capacity Ni-Cd rechargeable battery. View Distance. Approximate 1000 mtrs. LEDs- 010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colours back- up - hours of continues lighting at night all specified and directed. |
| 48 | Supply & fixing ABS Plastic Speed breaker is designed so dynamically and Compact that it can bear maximum load of it. The body of the breaker is made of ABS material. Two highly reflective reflectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process and then fixed on to the speed breaker so that dust and water cannot touch reflectors inside and thus it maintains its reflectivity for a long time complete all as specified and directed. |
| 49 | Supply & fixing road stud DA-972 of size 110 x 120 x 23.5mm (Wt. 370 gms.) Aluminium Alloy Die casted dynamically designed very high impact strength and fitted with 2 mos. Highly reflective reflectors & 2 nos. eye balls each on both sides.complete, all as specified and as directed by the Engr-in-Charge. |
| 50 | Supply and fixing cautionary /Mandatory sign board made of high intensiyt grade retro-reflective sheeting. It is made of alcobond sheet/ Aluminium sheet 2mm thick confiring to IS: 736 covered with high intensity grade retro reflective sheeting as per IRC standard and logos in black to be printed and fixed after etching treatment fixed with suitable adhewsive. It is painted with epoxy to standard made fixed to structural steel frame of MS angle 25x25xS mm with nuts bolts or rivets ensuring safety. This is fixed to one vertical past of 50x50x5mm angle or 50x50mm square pipe. as required 3mtrs.long. This is painted in black and white alternative band of 25cm height. One Message/definitions plate of size 600mm.900x200mm is fixed below. Similarly round shaped boards 900mm dia are provided. |
| 51 | Supply and fixing Convex mirror of size 800mm made of PC material provided with suirtable MS pipe post, duly powered coated as per site requirement.It is meant for Round turning, intersections, curves, T junctions, Hospital, Parking lots etc. It is also ideal for surveillance. It should have clear and define mirror images having 130 degree of viewing angle. It is unbreakable and stronger than glass complete all as specified and directed. |
| 52 | Supply & fixing of double legged Double side informatory sign board fixed on single frame and meeting back to back on the square pipe. ( This is double sided board ) single sided boards are made. The boards are of high intensity Green/Blue or as required colour grade retro- reflective sheeting of AVERY DENNISOX made out of 2mm thick Alco band /Aluminium sheet conforming to IS-736 to be covered with High intensity grade retro- rsheeting eflective (AVERY DENNISON) of Green/Blue as per IRC standard complete all as specified and directed. |
| 53 | M&L for 25 to 30 mm thick prepolished coloured designers chequerd tiles of size (300x300x 25 mm) set in CM (1:6) screed bed of thickness 15 mm including dismantling of existing tiles & PCC complete all as specified and directed |
| 54 | M&L for 40mm thick PCC (1:2:4) type 'B-1' (using 20mm graded crushed stone aggregate) as in flooring , sub base,etc work finished fair and even without using extra cement all as directed. |
| 55 | M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in coloured cement 15mm thick screed bed in CM (1:4) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as spd & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender