Tender For Comprehensive Repairs / Replacement To Various B/R Related Items In Various Md Accn In Wing Ii & V At Arty Centre Under Ge Nasik Road.
Tender Value
50 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
20 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repairs / Replacement To Various B/R Related Items In Various Md Accn In Wing Ii & V At Arty Centre Under Ge Nasik Road.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n exc 1.5 sqm each and making good the jambs, soffits of lintels etc. after fixing of new chowkhat or frame to match the existing surface. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 sqm each and making good the jambs, soffits of lintels etc. after fixing of new chowkat or frame to match the existing surface. |
| 3 | Taking down shutters of any description exc 1 Sqm and n. exc 2 Sqm each. |
| 4 | Taking down shutters of any description exc 2 Sqm each. |
| 5 | S&F aluminium (minimum 50 micron powder coated) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 6 | S&F aluminium (minimum 50 micron powder coated) window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/tower bolt 150mm long (1 No.) hinges type B-21, 100mm long (2 Nos.), suitable handle (1 No.), rollers, grip etc. complete all as specified. |
| 7 | S&F 4.8 mm thick ordianary quality float glass exe 0.5 sqm in each pane of glazing with oil putty /beading etc all as specified and directed. |
| 8 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 9 | S&F Providing precast cement concrete 1:2:4 type B1 (20mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin), corbels, brackets, Kerb stones etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match with CM 1:6 complete all as specified and directed. |
| 10 | S&F Framed work as in grill, doors or gates of angle or other section with gusset plates, braces etc, complete, drilled for fixing of steel sheeting or other covering, Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe Grade 290(Gde E-165) complete all as specified and directed. |
| 11 | M&L for 2nd class hardwood for Plain, solid, straight chowkhats and frames, framed rebated on the solid, rounded or chamfered, put together with glue pinned complete all as specified and directed. |
| 12 | S&F 35mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified. |
| 13 | S&F flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 14 | M&L for preparing new wood or wood based surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer. |
| 15 | S&F factory made 100% Solid WPC (Wood Polymer Composite) Door Frame 63x51 mm (Moulded) Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 16 | S&F 25mm thick 100% Solid WPC (Wood polymer Composite) Solid Plain Flush Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/rice husk/wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free, Water/ Moisture Proof, Fire Retardant complete all as directed. |
| 17 | S&F staineless steel butt hinges 100mm size medium weight complete all as specified and directed |
| 18 | S&F stainless steel tower bolt 150 mm long complete all as specified and directed. |
| 19 | S&F 150 mm stainless steel handels complete all as specified and directed. |
| 20 | S&F Stainless steel sliding door bolts, 250 mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified. |
| 21 | S&F floor door stopper 150mm length of cover plate of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 22 | Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar, for inserting holdfast and making good dismantled portion in CM 1:3 or PCC 1:2:4 type B1 as required. |
| 23 | All as per item No.22.00 above but in Stone walls complete all as specified. |
| 24 | Dismantling wooden boarding, any description fixed in any position with nails complete all as specified. |
| 25 | S&F in repair 18mm prelaminated coloured solid PVC sheet suitably fixed in MS angle frame work as in cup board, Cabinet, Drawer etc as per manufacturer specification and drawings complete all as specified and directed. Note: Mild steel frame work shall be measured and paid sepratly. |
| 26 | S&F stainless steel kitchen basket in various type of basket, plain basket 4\\", thali basket 8\\" height, cup saucer 4\\" height and perforated cutlury basket 4\\" height etc all specified and directed. |
| 27 | S&F stainless steel Auto closing concealed hinges 9.5 cranks for half overlay doors with opening angle 95* (14-32mm) with integrated overlay adjustment + 2.50mm & depth adjustment 4mm complete all as specified. |
| 28 | S&F hitech channels (exc 300mm n exc 500 mm) as complete all as specified and directed. |
| 29 | S&F Handles of senso (as per 3D designs) 150 mm inclduding all connection fitting as complete all as specified and directed. |
| 30 | S&F Europa cupboard locks as complete all as specified and directed. |
| 31 | S&F Brass helical / ordinanry rat tail rod pattern door spring 300 mm including roller and roller plate complete fixed with welding all as specified |
| 32 | M&L for PCC 1:3:6 type C1 (20mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 33 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris out of MOD land and rubbish off the premises complete all as specified |
| 34 | M&L for Non-skid coloured ceramic joint free tiles 600x600x7 to 8 mm thick or above (square/rectangular) in flooring etc. laid over screed bed 15 mm thick in CM 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match. |
| 35 | M&L for colour glazed cermic tiles 300x450x7mm thick or above size in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match laid over and including rendering 10mm thick in CM 1:4 as in backing coat on fair surfaces of brick wall |
| 36 | M&L for 600x600 mm or above (or equivalent area in rectangular size), 10 mm thick double charged vitrified tiles (soluble salt not acceptable) as in flooring, laid in any shape/pattern over and including 15 mm thick screed in CM 1:6 as in floors. |
| 37 | M&L for 75mm thick cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) in sub base of flooring/hard standing complete all as specified. |
| 38 | M&L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in sub base of flooring/hard standing complete all as specified. |
| 39 | Demolition of Cement Concrete of any description in ground floor & paving n.exc. 15 cm thick (below or above ground level) complete all as specified |
| 40 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified. |
| 41 | M&L for 20mm thick Granite (jet black) work machine cut, (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 15mm thick screed bed in CM 1:4, pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified. |
| 42 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified Note: Stone slabs so provided shall be not less than 900mm in length |
| 43 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified |
| 44 | Dismantling Plain or corrugated steel sheeting of any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 45 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 46 | S&F rolled mild steel joist, channel, angle, flat section fixed independently without connecting plates or MS tubular sections etc (cut to ordinary length i.e. within 20mm length indicated) grade Fe 410-W (E 250) all as directed. |
| 47 | S&F steel work in tubular pipes including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 Grade St-240 complete all as specified and as directed. |
| 48 | Preparing new untreated steel or iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer. Please Enable Macros to View BoQ information |
| 49 | Preparing new untreated steel or iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender