Tender For Maintenance On Shimla Bye Pass Road Km 13/00 To 24/250. (Sh:- Repair Of Patches Between Rd 13/620 To 13/727).
Tender Value
12.90 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
6 days left
EMD
25850
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance On Shimla Bye Pass Road Km 13/00 To 24/250. (Sh:- Repair Of Patches Between Rd 13/620 To 13/727).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for Structures .Earth work in excavation of foundation of structures as per drawings and technical specifications clause 304, including setting out, construction of shoring and bracing ,rermoval of slumps and other deleterious matter ,dressing of sides and bottom , back filling the excavation earth to the extent required and utlising the remaining earh locally for road work Ordinary Soil Manual Means , stacking the useful materials and disposal of unserviceable materials in all leads & lifts . Any loss to public /private poperty during course of excavation shall be the whole responsibility of the contractor including carriage of materials and equipment in all leads and lifts by all modes of transportation as per the direction by the Engineer-in-charge. |
| 2 | Construction of granular sub-base by providingwellgradedmaterial,spreading in uniform layers with Tractor mount graderonpreparedsurface,mixingbymix inplacemethodwithrotavator atOMC, and compacting with smooth wheel roller to achieve the desired density, completeas per Technical SpecificationClause 401. For Grading III Material |
| 3 | Prime Coat over WMM/WBM (i) Providing and applying primer coat with SS1 grade bitumen emulsion onprepared surface of granular Base including clearing ofroad surface and spraying primer at the rate of 0.90kg/sqm using mechanical means. |
| 4 | Providing and applying tack coat with bitumen emulsion pressure distributer at the rate of 0.25 Kg per sqm on prepared bitumen surface cleaed with mechanical broom as per clause 503 |
| 5 | Providing and laying 50 mm dense graded bitumenious macadame with 100 to 120 TPH batch type HMP producing an average output of 75 tonne/hour using crushed aggregate of specified grading, premixed with bitumenious binder @ 4.0 to 4.50% by weight of total mixed and filler , transporting the hot mix to work site , laying with a hydrostatic paver Finisher with sensor control to the required grade , level and alignment , rolling with smooth wheeled vibratory and tendom roller to achieve the desired compaction as per MoRTH specifiaction clause 507 complete in all aspects |
| 6 | Providing and laying 40 mm thick Bitumenious concrete with 60-90 TPH computerized HMP producing an average output of 75 tonne per hour using crushed aggregates of specified grading-II premixed with VG-30 bitumenious binder with minimum binder content of 5.5% of total weight of mix and filler (binder content as per job-mix formula shall be paid) above or below 5.5% transporting the hot-mix to work site laying with a hydrostatic paver finisher with sensor control to the required grade ,level and alignment rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per Morth Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender