Tender For Performance Based Contract Annual Repair And Maintenance Of Sewerage Network Of Stp North Disposal And Summerhill Zone For Two Years Complete Per As Direction Of Er.-In-Charge.
Tender Value
2.57 Crore
Estimated cost
Bid Submission
18 Jul 2026
6 days left
EMD
3.32 Lakhs
Bank guarantee accepted
Document Fee
7000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Performance Based Contract Annual Repair And Maintenance Of Sewerage Network Of Stp North Disposal And Summerhill Zone For Two Years Complete Per As Direction Of Er.-In-Charge.
BOQ
| Sl. No. | Item Description |
| 1 | Performance based contract (Sewerman, Beldar, Pumber Supervisor, Accountant etc.) for repair running and maintenance (Including cement , sand, aggregate and brick etc and all the necessary tools all required while the repair work/ laying work i.e including excavation for laying of line) of sewerage network of various diameter under STP North Disposal Zone for 2 years complete in all respect as per the directions of Engineer-in-charge. |
| 2 | Performance based contract (Sewerman, Beldar, Pumber Supervisor, Accountant etc.) for repair running and maintenance (Including cement , sand, aggregate and brick etc and all the necessary tools all required while the repair work/ laying work i.e including excavation for laying of line) of sewerage network of various diameter under STP Summerhill Zone for 2 years complete in all respect as per the directions of Engineer-in-charge. |
| 3 | Excavation in earth work and disposal of all excavated earth up to all leads and lifts, disposed earth to be levelled neatly dressed as per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 4 | Providing, laying jointing & testing in trenches centrifugal cast ductile iron (spun) pressure pipes as per IS:8329/2000 Class K-7 duly ISI marked, inside cement mortar lined suitable for tyton (push on joints) for sewer lines including cutting of pipes, chamfering where required (earth work in trenches and jointing of pipes to be measured and paid for separately) including carriage up to the site of work, testing etc., complete as per instructions of the Engineer-in-charge. |
| 5 | 150 mm |
| 6 | 200 mm |
| 7 | Providing & fixing in trenches centrifugal cast ductile iron fittings of 9523/2000 class A, series K-12 with inside cement mortar lined suitable for tyton (push on joints) with sewers, such as socketed bends of all degrees, socketed, tees, collars and all other required fittings, including carriage up to the site of work, testing etc. complete as per instructions of the Engineer-in-charge. (earth work in trenches and jointing of fittings to be measured and paid for separately). |
| 8 | 150 mm dia double socket DI Bend of require degree |
| 9 | 90 degree |
| 10 | 45 degree |
| 11 | 22.5 degree |
| 12 | 11.25 degree |
| 13 | DI Tee 150X150X150mm |
| 14 | DI Tee 150X150X100mm |
| 15 | MJ Collar 150 mm dia |
| 16 | 200 mm dia double socket DI Bend of require degree |
| 17 | 90 degree |
| 18 | 45 degree |
| 19 | 22.5 degree |
| 20 | 11.25 degree |
| 21 | DI Tee 200X200X150mm |
| 22 | DI Tee 200X200X200mm |
| 23 | MJ Collar 200 mm dia |
| 24 | Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket confirming to IS 12820/1989 complete as per direction of er-in-charge. |
| 25 | 150 mm |
| 26 | 200 mm |
| 27 | Steel work welded in built up section/framed work, including cutting, hoisting. Fixing in position and applying a priming coat of approved steel primer using structural steel etc. MS Angle 40x40x5 mm as required. |
| 28 | Providing form work with steel plate 3.15 m.m thick welded with angle iron 30x30x5 m.m so as to givea fair finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plaiin concrete work in:- Foundation ,footings basis of columns etc and mass concrete complete as direction of Engineer-in-charge. |
| 29 | Providing fixing of SFRC frame cover manufacture as per BIS:12592 (Part 1 &2) for Manhole of load capacity of 20 MT having diameter 560 mm complete installation as per direction of Er.-in-charge. |
| 30 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of entering, shuttering, finishing and reinforcement, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) complete as direction of er-in-charge. |
| 31 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of entering, shuttering, finishing and reinforcement, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) complete as direction iof er-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender