Tender For Department Of Civil Engineering

Sharing tender

Tender for Department Of Civil Engineering , Civil Engineering , Auger Boring • Engine Type: 4-Stroke, Air-Cooled, Single-Cylinder Petrol Engine • Displacement: 196 cement concrete • Power Output: Minimum 6.5 - 7 Hp (≈3.5 Kw) • Maximum Engine Speed: ~3600 - 4000 Rpm • Starting System: Recoil (Manual) Start • Fuel Type: Pure Petrol • Fuel Tank Capacity: Minimum 1.5 - 1.6 L • Supported Auger Bit Sizes: 4″, 6″, 8″, 10″, 12″, 14″ (100 - 350 Mm) • Bit Material: Heavy-Duty Mild Steel With Powder Coating • Typical Drilling Depth: Minimum 3.5 - 4 Ft Per Bit (800 Mm - 1.2 M) • Bit Coupling: Quick-Coupling System For Easy Bit Replacements • Frame: Robust Tubular Steel Frame With Ergonomic Handles And Vibration Absorbers • Weight: Minimum 20 - 22 Kg (Without Auger Bit) , Weighing Balance 200 Kg Capacity With 50G Accuracy• Capacity: 100 Kg • Type: Digital Weighing Balance • Least Count / Accuracy: 10 G Or Better • Display: Led/Lcd Digital Display • Power Supply: Ac Mains With Inbuilt Rechargeable Battery Backup • Platform: Stainless Steel, Sturdy Construction • Functions: Tare, Zero Tracking, Overload Indication • Operating Time (Battery): Minimum 8-12 Hours • Standards: Legal Metrology Approved (Preferred) , Complete Set Of Seive For Fine Aggregate 200 Dia • Type: Is Standard Test Sieves For Fine Aggregate • Material: Brass Frame With Brass Woven Wire Mesh • Diameter: 200 Mm • Height: As Per Is Specification • Aperture Sizes (Complete Set): 4.75 Mm, 2.36 Mm, 1.18 Mm, 600 Μm, 300 Μm, 150 Μm, Pan & Lid • Standards: Is 2386 (Part I) / Is 460 • Finish: Smooth, Corrosion-Resistant • Accessories: Lid And Bottom Pan Included , Complete Set Of Seive For Course Aggregate 200 Dia Brass; 200 Mm Dia; Complete Set (80-4.75 Mm); Lid & Pan. , Flow Table Apparatus With All Accessories(Hand Operateddimensions And Specifications As Per Is 9103, • Table Top Made From Flat Metal Plate, Minimum Thickness 1.5 Mm. • Table Top Size: 700 Mm × 700 Mm, With Flatness Tolerance Of ±1.5 Mm. • Table Top Marked With: Scribed Cross At Centre, Lines Parallel To Table Edges And Central Circle Of 200 Mm Diameter • Underside Of Table Top Reinforced To Prevent Distortion. • Total Mass Of Table Top: 16 ± 1 Kg. • Table Top, Base Frame Front And Upper Stops Provided As Per Is 9103. • Lower Front Edge Fitted With Two Rigid Stops To Transfer Load Directly To Base Frame. • Base Frame Designed To Transfer Impact Load Directly To Supporting Surface, Minimizing Bounce. • Stop Watch - Digital - 2 Nos • Scale 1 Mtr - 2 Nos • Mounting Wooden Platform 300 Mm Height • annual maintenance contract For 3 Years Inclusive.