Tender For Provn Of Boundary Wall And Toilet Block Near Cwe Office And Repair To False Ceiling, Doors & Windows In Recreation Room At Cwe Office Jaipur At Jaipur Mil Stn
Tender Value
14.95 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
20 days left
EMD
29900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Boundary Wall And Toilet Block Near Cwe Office And Repair To False Ceiling, Doors & Windows In Recreation Room At Cwe Office Jaipur At Jaipur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ 82563/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: PROVN OF BOUNDARY WALL AND TOILET BLOCK NEAR CWE OFFICE AND REPAIR TO FALSE CEILING, DOORS & WINDOWS IN RECREATION ROOM AT CWE OFFICE JAIPUR AT JAIPUR MIL STN CA NO: CWE/JPR(S)- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc,or for shaft, wall, cesspits, manholes pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 3 | M&L for cement concrete in foundations, filling and mass concrete type D2 (1:4:8 ) using 40mm graded stone aggregate complete all as specified and directed. |
| 4 | M & L for Brick work with subclass ' B' brick, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 5 | Returning filling in including spreading, leveling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed. |
| 6 | Removing of excavated material (soil) to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.50 metre above the starting point complete all as specified and directed. |
| 7 | Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc finish with rough finish flat surface complete all as specified and directed. |
| 8 | M&L for RCC nominal mix type B-1(1:2:4) as in roof Beams, cantilevers, bressummers, lintels over 1.5m span with 20 mm graded aggregates complete all as specified and directed. |
| 9 | M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, slabs, hooking ends and binding with and incl mild steel wire 0.9 mm dia complete all as specified and directed. |
| 10 | M&L for steel reinforcement of TMT bars (FE-500 Grade) not exc 8 mm dia as in stirrups cut to length and bent to shape required including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 11 | M&L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 externally and finished even and smooth ( without using extra cement ) complete all as specified and directed. |
| 12 | Material & Labour for applying Two coats of exterior emulsion paint of approved shed including preparation of newly plastered surfaces over a coat of exterior primer applied over new surfaces over a coat of wall care putty complete all as specified and directed. |
| 13 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 14 | S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with particle board core complete all as specified and directed. |
| 15 | S & F 100mm size butt hinges medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 16 | M&L for earth filling under floors including watering and consolidation in layers n exc 25 cm complete all as specified and directed.Note:- The earth obtained from excavation item No 01 to be used under this item. |
| 17 | M&L for Hardcore of broken stone or boulder gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to true surface complete all as specified and directed. |
| 18 | M&L for 100 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate, as in sub base to floors and paving etc all complete all as directed. |
| 19 | M&L for 25 mm thick plain cement concrete 1:2:4 type B1, using 20 mm graded stone aggregate, as in sub base to floors including finishing even and smooth all complete all as specified and directed. |
| 20 | M&L for 15 mm thick screed bed in CM 1:6 including maintaining proper slope to counter the negative slope complete all as specified and directed. |
| 21 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) of size 600 x 1200 mm in floors etc. set with tile adhesive of approved make complete all as specified and directed. Note :- Tile adhesive shall be of Asian/Roff/Weber(Saint Gobin) or equivalent as per list of approved makes. |
| 22 | S&F coloured glazed digital ceramic tiles size 600 x 1200 mm, 10 mm thick edge cut/ joint free on walls etc in the combination of light and dark shade concept set & jointed in neat cement slurry & pointed in white/ coloured cement to match over 10 mm thick rendering in CM 1:6 tile adhesive of approved make complete all as specified and directed. Note :- Tile adhesive shall be of Asian/Roff/Weber(Saint Gobin) or equivalent as per list of approved makes. |
| 23 | M & L for cement concrete type C-2 1 : 3 : 6 40mm graded aggregate as in plinth protection 75 mm thick complete all as specified and directed. |
| 24 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors 16 mm bore complete all as specified including all brass fittings and plain fittings complete all as specified and directed. |
| 25 | Description all as per item No 23.00 above but size of tubing 20 mm bore complete all as specified and directed. |
| 26 | S&F two way bib tap 15mm bore cast copper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. Make - Jaquar Cat Part No. ARI-CHR-39041 & equivalent make in kohler & Grohe and as per list of approved makes. |
| 27 | S & F 15 mm dia Angle/stop valve, cast copper alloy chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed.Make- Jaquar Cat Part No. OPP-CHR-15053PM & equivalent make in kohler & Grohe and as per list of approved makes. |
| 28 | S&F rimless wall hung EWC white or coloured including connection to drain (or outgoing pipe) and to flushing pipe, anti sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device including flushing cistern including cover plates etc complete all as specified and directed.Make :- KUS-WHT-35953BIUFSMPM or equivalent make in kohler & Grohe and as per list of approved makes. |
| 29 | Supply and fix white vitreous china table top basin of size 435 mm x 700 mm x 135 mm fixed in position as per manufacturer instruction and connecting to drain pipe complete all as specified and directed. |
| 30 | Supply only 32 mm bore brass CP coupling with long shank for wash hand basin complete all as specified and directed. |
| 31 | S&F Cast copper alloy bottle trap for wash basin screwed to iron pipe or union complete all as specified and directed. Make:- Jaquar CAT part No. ALD-CHR-769L300x190 & equivalent make in kohler & Grohe and as per list of approved makes. |
| 32 | S&F 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 33 | S & F Glass Shelf 600mm Long complete all as specified and directed. |
| 34 | S&F 20mm bore gate valve gun metal screwed down high pressure with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed. |
| 35 | S&F looking mirror of size 1.20 m x .90 m fitted over 12 mm thick plywood with the help of screws or chemical complete all as specified and directed. |
| 36 | S&F brass CP health faucet with 1.2m chain complete all as specified and directed. |
| 37 | S&F Vitreous China bowl urinal flat back, size of 360 x 350 x 710 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe waste pipe) complete all as specified and directed. |
| 38 | S&F chromium plate urinal spreader for fixing with 15 mm dia pipe with auto closing system complete all as specified and directed. |
| 39 | S&F single lever mixer for wash basin 15mm bore cast copper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. Make:- Jaquar Cat Part No. ALI-CHR-85011B & equivalent make in kohler & Grohe and as per list of approved makes. |
| 40 | S & F PVC (SWR) 75 mm floor trap, plain with grating including jointing with solvent cement fixed in cement concrete type B1 1:2:4 complete all as specified |
| 41 | S&F Push button soap dispenser 0.8 litre capacity complete all as specified and directed. |
| 42 | S&F Paper Towel Dispenser - Towels with c/z Folds - Wall Mounted capacity: 400-600 C/Z towels material: AISI 304 stainless steel finish: satin complete all as specified and directed. |
| 43 | S&F toilet paper holder fancy type complete all as specified and directed. Make:- Jaquar Cat Part No. CPA-CHR-1151 & equivalent make in kohler & Grohe and as per list of approved makes. |
| 44 | S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor ( Joining to be done with solvent cement ) including PVC brackets complete all as specified and directed. |
| 45 | S&F 110 mm mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 46 | S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls ( Joining to be done with solvent cement ) including PVC brackets. |
| 47 | S & F PVC (SWR) 110 mm vent cowl complete all as specified and directed. |
| 48 | S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor ( Joining to be done with solvent cement ) including PVC brackets complete all as specified and directed. |
| 49 | S & F for 75 mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 50 | S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 51 | S&F 75 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 52 | S&F for 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and providing 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 53 | M&L for 200mm bore of pipe, DWC pipes laid in trenches and jointed complete with collars complete all as specified and directed. |
| 54 | Cutting into existing manholes/ septic tank for connecting new drains making good to pipe and rendering , cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4, type B-1, smooth finished and reforming benching as required for 150mm bore pipe complete all as specified and directed. |
| 55 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 56 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 57 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 58 | M&L for 20-25 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win- dow-cills, cooking plat- forms and like in cement mortar (1:4) including point- ing in white cement (1:2) us- ing marble dust with admix- true of pigment to match with shade of granite over 20 mm screed bed in CM 1:4 complete all as specified and directed. |
| 59 | S&F HPL compact laminate Toilet cubicals of size 2125 mm depth, 900 mm wide and having a door opening of 750 mm to be fixed on floors including necessary hardware such as hinges, locks, handles and sliding bolts complete all as specified and directed. |
| 60 | S & F Steel work in tubular trusses of required shape and size including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 fixing/supported on wall complete all as specified and directed. |
| 61 | S&F Puff sheets PUF Sheet, Thickness: 100 mm, For Insulation of tensile strength 38 TO 40 DENSITY complete all as specified and directed. |
| 62 | M&L for Preparation of new or previously untreated steel surface of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat red oxide complete all as specified and directed. |
| 63 | S&F for 4.8 mm thick sheet glass ordinary quality and glazing with neoprene beading n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 64 | S&F 300 mm Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 65 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed. |
| 66 | S&F 605 x 605 mm anodized aluminium snap T grid frame work for false ceiling with hangers 6 mm dia G.I. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed. Note :- Design & pattern of grid shall be approved by Engineer-in-Charge. |
| 67 | S&F 10mm PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed. |
| 68 | S&F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 69 | M & L for precast RCC soakage well (900- 950 mm dia & 40 mm thick wall, 250 mm height precast RCC wall panel joining together) upto 8 m effective depth with RCC cover including excavation in any type of soil PCC and removing excavated solid outside MD land complete all as specified and as per manufacturer instruction or directed by Engineer-in-charge. |
| 70 | M&L for cement concrete type B0 1:2:4, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 71 | M&L for Providing precast cement concrete Type B0 1:2:4 (12.5mm graded) in louvers and jallies, 25mm thick , including all mouldings but excluding frame set in CM 1:4 complete all as specified and directed. |
| 72 | M&L for Providing precast cement concrete type B1 1:2:4 (20 mm graded) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match set in CM 1:4 complete all as specified and directed. |
| 73 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint of approved shade over a coat of alkali resistant primer complete all as specified and directed. |
| 74 | Dismantling wall & ceiling board (fibre, pulp, insulation etc) or insulation boards/slab/ blankets any thickness including cover fillets complete all as specified and directed. |
| 75 | M&L for T grid fibre reinforced 12 mm thick for seamless false ceiling fixed with screw over and including Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete as per manufacturer instruction complete all as specified and directed. Note:- Pattern shall be approved by GE. |
| 76 | M&L for granite of any type tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed including 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 77 | Providing and fixing factory made uPVC white colour Sliding window Three track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 +/- 0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose. |
| 78 | S&F for 30 mm thick Flush Shutters, Solid core construction, Single or double leaved rebating shall be square or splayed, with block board core and both face is covered plywood face panels free from twist or wrap in plane, complete all as specified and directed. |
| 79 | M&L for decorative laminate type 1, 0.9 mm thick colour and pattern as approved fixed as in door shutters complete all as specified and directed. |
| 80 | S&F Aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws, complete all as specified and directed. |
| 81 | S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed. |
| 82 | S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 83 | S&F butt hinges extruded brass with galvanised mild steel hinge pin bright polished and fixed of size 100mm complete all as specified and directed. |
| 84 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 85 | S&F powder coated aluminium frame of approved colour coating for doors, window, ventilators, cabin partition with one or more rebates including joining cleats for fixing etc complete all as specified and directed. |
| 86 | S&F aluminium anodised powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 87 | M&L for 4 mm thick Sheet glass ordinary quality and glazing with oil putty/rubber gasket in square n.exc 0.50 sqm in each pane complete all as specified and directed. |
| 88 | M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed. |
| 89 | M&L for preparation of newly plastered surfaces of walls of any description with 1 mm thick of wall putty and applying two coats of oil bound distemper complete all as specified and directed. |
| 90 | M&L for Preparation of old distempered / decorated surfaces of walls including washing, rubbing down and stopping holes, trading oil and greasy spots and applying two coats of oil bound distemper over one coat of primer after applying 1 mm thick wall care putty complete all as specified and directed. |
| 91 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. |
| 92 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed. |
| 93 | S&F 25 mm dia stainless steel drapery rod with complete stainless steel holder, brackets and end cap suitable cut to size and fixed in position, including Standard ring complete all as specified and directed. |
| 94 | M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), concealed in wall, drawn into and including rigid non metallic PVC conduit, medium grade, not less than 20 mm dia, ISI marked, ivory colour, with all conduit fittings / fixing accessories and terminated in modular metal flush box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for one light / fan / bell point controlled by one switch, complete all as specified and as directed.Note :(i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of modular metal flush box & cover plate of size as required at site and cutting chases in stone / brick masonry and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate. |
| 95 | M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), concealed in wall, drawn into and including rigid non metallic PVC conduit, medium grade, not less than 20 mm dia, ISI marked, ivory colour, with all conduit fittings / fixing accessories and terminated in modular metal flush box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for one 3 Pin socket outlet 06 Amps on the same board with other switches, complete all as specified and as directed. Note :- (i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of MS sunken box & cover plate of size as required at site and cutting chases in stone / brick masonry and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate. |
| 96 | M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 Sqmm (Green), concealed in wall, drawn into and including rigid non metallic PVC conduit, medium grade, not less than 20 mm dia, ISI marked, ivory colour, with all conduit fittings / fixing accessories and terminated in modular metal flush box of thickness not less than 1.2 mm, cover with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulator as required for one 3 Pin socket outlet 06 Amps on the independent board, complete all as specified and as directed.Note :-(i) The Switch / Socket accessories shall be measure and paid separately. (ii) The cost of modular metal flush box & cover plate of size as required at site and cutting chases in stone / brick masonry and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate. |
| 97 | S&F Modular Switch one way 6 A, 1 module complete all as specified and directed. |
| 98 | S&F Modular Socket, 6A - 2/3 pin combined, 2 module complete all as specified and directed. |
| 99 | S&F ceiling rose 3 phase, PVC / polycarbonate, isolated body complete all as specified and directed. |
| 100 | M & L Sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete all as specified and directed. |
| 101 | M & L Bricks for protection cover to under ground cable (with old size sub class ‘B’ bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm complete all as specified and directed. |
| 102 | M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade of following sizes: 10 sqmm 2 Core complete all as specified and directed. |
| 103 | S&F sheet metal enclosure factory fabricated for MCB distribution board SPN double door type concealed in wall 240 Volt 4 way IP-42 protection with 200 amp rated bus bar complete all as specified and directed. |
| 104 | S&F rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and 06 to 32 Amp current carrying capacity complete with connection testing and commissioning all as specified and directed. |
| 105 | S&F rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN and 32 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. |
| 106 | S&F LED fixtures 20 Watt with extruded polycarbonate, environmental friendly, slim design with decorative and caps, high performance diffuser for soft & glare free light, minimum lumen output 1900 lm with efficacy 110 lm/w, driver with high voltage protection upto 380 V AC & surge protection upto 2.5 KV, CCT(K)-6500, LM 80 tested high brightness LED technology complete all as specified and directed. |
| 107 | S&F LED fixtures 10 Watt with extruded polycarbonate, environmental friendly, slim design with decorative and caps, high performance diffuser for soft & glare free light, minimum lumen output 1900 lm with efficacy 110 lm/w, driver with high voltage protection upto 380 V AC & surge protection upto 2.5 KV, CCT(K)-6500, LM 80 tested high brightness LED technology complete all as specified and directed. |
| 108 | M&Lfor LED light fitting 9W / 10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 109 | S&F exhaust fan, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep of size 200/250mm complete all as specified and directed. |
| 110 | Schedule of Credit Total in Figures 0.0 0.0 -2700.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Minus Two Thousand Seven Hundred Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender