Tender For Construction Of Entrance Gate At District Court Ramgarh In Ward No-28, Chhatarmandu.
Tender Value
56.01 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
7 days left
EMD
1.12 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramgarh → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Entrance Gate At District Court Ramgarh In Ward No-28, Chhatarmandu.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 2 | Kerb stone Block M30 Grade (Size 375 mm x 300 mm x 150 mm ) Inclusive of OH &CP |
| 3 | Earth work in excavation in foundation trenches in hard soil (vide classification of soil item - A+B) and disposal of excavated earth as obtained to a distance up to 50M from the foundation trenches all complete as perbuilding specification and direction of E/I. |
| 4 | Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 5 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l |
| 6 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. |
| 7 | Providing P.C.C. M - 15 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarsesand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement – All work up to plinth level.1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. |
| 11 | Providing 75A brick work in C.M. (1:4) in superstructure -do- -do- all complete job as per specification and direction of E/I. |
| 12 | Providing R.C.C. M-200 (1:1½:3) in column -do- -do- all complete job as per specification and direction of E/I. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 16 | Providing R/F-do- -do- all complete job as per specification and direction of E/I.8 MM Dia |
| 17 | Providing R/F-do- -do- all complete job as per specification and direction of E/I.10 mm Dia,12 mm, 16mm Dia & 20 mm Dia |
| 18 | Providing and laying polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent |
| 19 | Providing 12 mm thick cement plaster (1:6) with approved quality of sand of requisite F.M. (2.5 to 3) -do- -do- all complete job as per specification and direcition of E/l. |
| 20 | Providing and applying putty of 2 mm thickness of approved brand and manufacture over the plaster wall surface to prepare the surface even and smooth complete job as per building specification and direction of E/I. |
| 21 | Providing 12 mm thick cement plaster (1:6) with approved quality of sand of requisite F.M. (2.5 to 3) -do- -do- all complete job as per specification and direcition of E/l. |
| 22 | Supplying, fitting and fixing M.S. grill gate with M.S. grills made of 20x6mm M.S. flats or 16mm. M.S. square bars fitted on 25x25x6mm. M.S. Angle frame – do – (when steel is not supplied by the deptt.).Per Kg – |
| 23 | Providing two coat of painting with ready mix paint of approved shade do all complete job as per direction of EI |
| 24 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved mak+B50e conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, includingnecessary filling up the gaps at junctions, i.e. at top, bottom and sides withrequired EPDM rubber/neoprene gasket etc. Aluminium sections shall besmooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed Portion : Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 25 | 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) — sqm — 1176.80 |
| 26 | E/W in back filling--do -do-- all complete job. |
| 27 | “Providing, fixing and finishing of SS 304 grade raised letters on gate as per approved Text & design, including all necessary materials, welding, polishing, fastening arrangements, complete in all respects.” |
| 28 | Supply, carriage, placing and fixing of 4'-0\\" high Lady Justice Statue made of polished white Makrana marble, complete in all respects at designated location, including all labour, tools & plants, lifting, loading, unloading, transportation, fixing and incidental charges as per approved design and direction of Engineer-in-Charge,@110000 |
| 29 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. |
| 30 | Stone crusher dust finer than 3mm with not more than 10% passing 0.075 Sieve at Quarry |
| 31 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. |
| 32 | Providing P.C.C. M - 150 with nominal mix of (1:2:4)) in foundation with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 33 | Excavation for road way in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 metres (average lead50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections. |
| 34 | Construction of Subgrade and Earthen shoulder with approved materials obtained from borrow pits with all lifts and leads transporting to site ,spreading ,grading to required slope and compacted to meet requirement \of table No-300-2 |
| 35 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 for grading - I complete as per the direction of Engineer-in-charge. |
| 36 | Construction of un-reinforced,dowel jointed ,plain cement concrete pavement over a prepared sub base with 43 grade cement @400kg/cumec ,coarse and fine aggregate confirming to IS 383 ,maximum size of coarse aggregate not exceeding 25mm ,mixed in batching and mixing plant as per approved mix design ,transported to site laid with a fixed form or slip form paver ,spread ,compacted and finished in a continuous operation including provision of contraction ,expansion ,construction and longitudnal joints ,filler separation membrane ,sealant primer , joint sealant ,debonding strip,dowel bar ,tie rod admixtures as approved , curing compound , finishing to lines and grades as per drawing . |
| 37 | Wiring for light point /fan point/ exhaust fan point / call bell point with 1.5 sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box etc. as required |
| 38 | Supplying and fixing of two way single door, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator), 8 way single door |
| 39 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for.inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required. 6 A to 32 A ratings, DP MCB, \\"C\\" curve, |
| 40 | Installation testing and commissioning of ceiling fan. including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated. copper conductor . single core cable etc.as required |
| 41 | Installation of exhaust fan upto 450mm sweep in the existing opening , including making the hole to suit the size of the above fan, making good the damage, connection, testing , commissioning etc . as required |
| 42 | Installation testing and commissioning of pre-wired, fluorescent fitting ./ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly / wall. including connection with 1.5 sq.mm FR PVC insulated . copper conductor single core cable and earthing etc. as required. |
| 43 | PVC/XLPE insulated PVC sheathed heavy duty, armoured electrical cable with aluminiumconductor forworking voltage up to and including L100 volts. (Conformsto IS:1554,part-1) 10 sq mm 2 core |
| 44 | Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of l.l KV grade of size not exceeding 35 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 45 | Supplying and fixing 2 pin 5 amp. Ceiling rose on the existing junction box/ wooden block including connection etc. as required . |
| 46 | 2.5 sq mm ISI Marked, FR LS PVC insualted, single coie copper conductor cable |
| 47 | ceilins fan 48\\" (1200mm) |
| 48 | 12\\" (300mm) metal exaust fan . |
| 49 | Recess Mounting LED Round Down light (18/20W) |
| 50 | Supplying and fixing of following modular switch / soket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps, one way switch |
| 51 | Supplying and fixing of following modular switch / soket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps, 3 pin socket outlet |
| 52 | Supplying and fixing of following modular switch / soket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amps, one way switch |
| 53 | Supplying and fixing of following modular switch / soket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amps, 6 pin socket outlet |
| 54 | Supplying and fixing following size / modules , GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 module (78mmx 78mmx 45mm) |
| 55 | Supplying and fixing following size / modules , GI box along with modular base & cover plate for modular switches in recess etc as required. 4/5 module (78m x 140mm x 50m) |
| 56 | LED Batten (20/22W) |
| 57 | Cement |
| 58 | Chips |
| 59 | Brick |
| 60 | Steel |
| 61 | S.Dust |
| 62 | Add GST @18% |
| 63 | Add Labour Cess @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender