Tender For General-Govt Secretariat- Renovation And Maintenance Of Minister For Home And Vigilence Chamber And Office In 2Nd Floor Of North Block- Renovation And Maintenance Of Minister For Home And Vigilence-2026-General Civil Work
Tender Value
11.57 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
5 days left
EMD
28928
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Govt Secretariat- Renovation And Maintenance Of Minister For Home And Vigilence Chamber And Office In 2Nd Floor Of North Block- Renovation And Maintenance Of Minister For Home And Vigilence-2026-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Appendix 1 |
| 2 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) |
| 3 | 9.126.1:Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled and glazed shutters 25 mm to 40 mm thick.Marine plywood conformingto IS : 710 |
| 4 | OD64644/2026-2027:Plywood paneling (18 mm): Providing and fixing paneling using plywood, 18 mm thickplywood ( BWP 710 Grade ) to be fixed onto the existing framework using drywall screws andadhesive including primer. Complete as per the direction of the Engineer- in- Charge includingall costs of accessories, labour charges etc. complete |
| 5 | OD64646/2026-2027:Mica panelling : providing and fixing mica 1mm thick on to the existing plywood (superior quality) using adhesive complete as perthe direction engineer in charge including all the cost of accessories, labour charges etc. complete(data based on 9.126.1 of DAR) |
| 6 | OD64642/2026-2027:Providing and fixing PVC edge beading fixed with adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board/Plywood/Multiword/MDF as per direction of Engineer-in-charge. |
| 7 | OD64650/2026-2027:Providing and fixing wpc fluted wall panel on to the existing surface using adhesive complete as per the direction of engineer in charge including all the cost of accessories , labour charges etc complete. |
| 8 | 9.82:Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 9 | 9.83:Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 10 | 13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 11 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 12 | 13.82.2:Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats |
| 13 | 13.69.1:Polishing on wood work with ready mixed wax polish of approved brand and manufacture:New work |
| 14 | 9.165.1:Providing and fixing bright /matt finished Stainless Steel handles of approvedquality & make with necessary screws etc all complete.125 mm |
| 15 | OD64640/2026-2027:Providing and fixing stainless steel Auto close Hinges for the cupboard including materialLabour charges etc. complete. |
| 16 | 9.90.2:Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 50 mm |
| 17 | OD64652/2026-2027:Providing and laying floor finish with superior quality polished imported wooden SP( Stone Plastic) Composite panel flooring, 1390mm x 120mm x9mm size of nearest size, SP composite panel of C4, or approved equivalent make it should have water resistance, abrasion resistance, impact resistance, fire resistance, slip resistance etc. , and the panel tongued and grooved in flooring after cleaning and levelling the surface thoroughly and fixing 3mm thick or nearest size polyurethane foam as per manufacturer & specification , including cutting the panel to the required size and fixing with silicon sealant for the edges and iron screws etc. complete including providing edge beading and skirting and finishing the top edge of the skirting as per the directions of the Engineer in charge, the rate includes cost and conveyance of all materials to site, labour charges etc complete. |
| 18 | OD64648/2026-2027:Providing and applying texture paint of asian paint royale play or equivalent- New work (Two or more coats applied @ 3.28 ltr/ 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm finishing the surface to the entire satisfaction of engineer in charge as per the approved design. |
| 19 | OD64653/2026-2027:Providing and fixing roman blinds of best quality on window portion including all necessary fittings etc. as per the approval from Engineer- in - charge |
| 20 | OD64638/2026-2027:Labour for Miscellaneous works |
| 21 | 21.3.3:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) |
| 22 | OD73594/2026-2027:Supplying and fixing PVC vinyl floor sheet 1mm thickness good quality fixing with synthetic resign adhesive in correct position after cleaning and washing thoroughly clean the surface |
| 23 | OD73634/2026-2027:Providing and fixing Plain multipurpose cement board (High Pressure steam cures) as per IS:14862,with suitable screws for fibre cement board in partition etc. complete (frame work to be paid seperately) 8mm thick cement board. |
| 24 | 21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) |
| 25 | 21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side |
| 26 | 50.9.11.2:Providing and fixing Thomson Multi wood board or equivalent make paneling 18 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge. |
| 27 | OD73799/2026-2027:Providing and fixing good quality 450 mm stainless steel teliscopic sliders for cupboards work station etc...including all material and labour charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender