Tender For Annual Maintanance Contract Of Streetlight
Tender Value
15 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
8 days left
EMD
37500
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palakkad → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Maintanance Contract Of Streetlight
BOQ
| Sl. No. | Item Description |
| 1 | Annual Maintenance Contract of Street light |
| 2 | Labour charges for dismantling 1x40w/2x40w fluorescent tube Street light fittings from the existing pole and cleaning, rewiring/ repairing & refitting the same on existing pole and giving connection. |
| 3 | Dismantling the existing 20w/24w/40w/70w LED street light fitting from the KSEB electric post without any damage, repairing and refixing in the same position including labour and conveyance. |
| 4 | Labour charges for dismantling 2x11W CFL Street light fittings from the existing pole and cleaning, rewiring/ repairing & refitting the same on existing pole and giving connection. |
| 5 | Dismantling the existing pendent holder,9W/12W/ 18W LED bulb form the electric post repairing and replacing the bulb etc. on existing pole and giving connection. |
| 6 | Supplying and replacing 36/40W copper choke for fluorescent fitting with new one including labour and conveyance charges. |
| 7 | Supplying and replacing 1200mm 36/40W fluorescent tube with new one including labour and conveyance charges. |
| 8 | Supplying and replacing starter suitable for 36/40W fluorescent tube fitting with newone including labour and conveyance charges. |
| 9 | Supplying and replacing Starter holder suitable for 40W fluorescent fitting with new one including labour and conveyance charges. |
| 10 | Supplying and replacing side holder suitable for 36/40W fluorescent tube fitting with new one including labour and conveyance charges. |
| 11 | Dismantling and renewing the defective LED drive suitable for 20w/24W LED fittings and giving necessary connections including all charges. |
| 12 | Dismantling and renewing the defective LED drive suitable for 35/36/70w LED fittings and giving necessary connections including all charges. |
| 13 | Dismantling and renewing the defective LED Panel/PCB suitable for 20w/24W LED fittings and giving necessary connections including all charges. |
| 14 | Dismantling and renewing the defective LED Panel/PCB suitable for 35/36/70W LED fittings and giving necessary connections including all charges. |
| 15 | Supplying and renewing 9w LED bulb B22 base with new one including labour and conveyance charges |
| 16 | Supplying and renewing 12w LED Bulb B22 base,6500K with new one including labourand conveyance charges. |
| 17 | Supplying and renewing 15w LED bulb B22 base with new one including labour and conveyance charges |
| 18 | Supplying and renewing 18w LED bulb B22 base with new one including labour and conveyance charges. |
| 19 | Supplying and renewing 20w LED bulb B22 base with new one including labour and conveyance charges. |
| 20 | Supplying and renewing 25w LED bulb B22 base with new one including labour and conveyance charges. |
| 21 | Supplying and renewing 30w LED bulb B22 base with new one including labour and conveyance charges. |
| 22 | Supplying and renewing 40w LED bulb B22 base with new one including labour and conveyance charges. |
| 23 | Supplying and renewing 50w LED bulb B22 base with new one including labour and conveyance charges. |
| 24 | Supplying and renewing brass pendent holder with new one including labour and conveyance charges. |
| 25 | Supplying and renewing 200mm aluminium shade with new one including labour and conveyance charges. |
| 26 | Supply and renewing 1.50sqmm PVC insulated and PVC sheathed twin core Aluminium WP cable for street light fitting and holders including giving connection etc. complete. |
| 27 | Supply Conveyance, installation, testing and commissioning of 100W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 28 | Supply Conveyance, installation, testing and commissioning of 20W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 29 | Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 30 | Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender