Tender For Electro-Mechanical Repairs Work To Be Carried Out At Lift Irrigation Scheme Ijara Phase 1St. (Adv. Construction 4.99 Lacs)
Tender Value
4.99 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
9 days left
EMD
9980
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electro-Mechanical Repairs Work To Be Carried Out At Lift Irrigation Scheme Ijara Phase 1St. (Adv. Construction 4.99 Lacs)
BOQ
| Sl. No. | Item Description |
| 1 | Repairs to 3.5 cuses 7 stage VT pumping unit no 01: Complete dismantling of VT pump column size 250 mm Dia by way of:Disconnecting all leads from the motor and marking the terminals, uncoupling of motor from the pump, dismounting of motor with stool. Disassembling, dismantling and segregation of various pump parts such as discharge and column pipes, shafts and couplings, bowl, suction bell, impeller, stuffing box, fasteners, etc. |
| 2 | Extra per additional stage over corresponding column pipe size rates above (07 stage) |
| 3 | Extra per additional column pipe (02) over corresponding column pipe size rates above |
| 4 | Fabrication, providing and fitting of GM bush to bell mouth and bowl unitas per sample having finished weight as under: 1 kg/Bush |
| 5 | Fabrication, providing and fitting of GM bush to stuffing box/ sleeve, or Centre kit as per sample having finished weight as under: 1.5 kg/bush |
| 6 | Fabrication, turning, finishing and fitting of Stainless steel-410 shaft sleeve for Bell mouth, centre kit and bowl assemblies as per old sample, etc. having finished weight as under: 0.8 kg / sleeve |
| 7 | Complete assembling of all VT pump parts after cleaning, coupling and alignment with motor, connecting of motor leads and testing on full load. Single stage pumps with single column pipe upto 300mm ND |
| 8 | Extra per additional stage over corresponding column pipe size rates above (07 stage) |
| 9 | Extra per additional column pipe (02) no over corresponding column pipe size rates above |
| 10 | Providing of Grease (industrial type) conforming to IS 7623(Preferred makes: HPCL Lithon-3/ Indian oil Servogem-3/ or equivalents of BPCL; Castrol; Caltex) |
| 11 | Providing of circulating oil for bearing lubrication (Antiwear type)(Preferred make: Indian Oil Servosystem 57/ HPCL Enklo/ BPCL Mak) |
| 12 | Providing of graphited natural fibre (non-asbestos) packing/braided gland packing(Preferred make: Champion Style-3116 or equivalent) |
| 13 | Repairs to 3.5 cuses 7 stage Vt pumping unit no 02: Complete dismantling of VT pump column size 250 mm Dia by way of:Disconnecting all leads from the motor and marking the terminals, uncoupling of motor from the pump, dismounting of motor with stool. Disassembling, dismantling and segregation of various pump parts such as discharge and column pipes, shafts and couplings, bowl, suction bell, impeller, stuffing box, fasteners, etc. |
| 14 | Extra per additional stage over corresponding column pipe size rates above (07 stage) |
| 15 | Extra per additional column pipe (02) over corresponding column pipe size rates above |
| 16 | Fabrication, providing and fitting of GM bush to bell mouth and bowl unit as per sample having finished weight as under: 1 kg/Bush |
| 17 | Fabrication, providing and fitting of GM bush to stuffing box/ sleeve, or Centre kit as per sample having finished weight as under: 1.5 kg/bush |
| 18 | Fabrication, providing and fitting of GM lantern (cooling) ring for stuffing box as per sample having finished weight 1 kg |
| 19 | Fabrication, turning, finishing and fitting of Stainless steel-410 shaft sleeve for Bell mouth, centre kit and bowl assemblies as per old sample, etc. having finished weight as under: 0.8 kg / sleeve |
| 20 | Complete assembling of all VT pump parts after cleaning, coupling and alignment with motor, connecting of motor leads and testing on full load. Single stage pumps with single column pipe upto 300mm ND |
| 21 | Extra per additional stage over corresponding column pipe size rates above (07 stage) |
| 22 | Extra per additional column pipe (02) no over corresponding column pipe size rates above |
| 23 | Providing of Grease (industrial type) conforming to IS 7623(Preferred makes: HPCL Lithon-3/ Indian oil Servogem-3/ or equivalents of BPCL; Castrol; Caltex) |
| 24 | Providing of circulating oil for bearing lubrication (Antiwear type)(Preferred make: Indian Oil Servosystem 57/ HPCL Enklo/ BPCL Mak) |
| 25 | Providing of graphited natural fibre (non-asbestos) packing/braided gland packing(Preferred make: Champion Style-3116 or equivalent) |
| 26 | Repairs to 400 HP ATS Starter: Isolating and disconnecting of all incoming and outgoing leads from 400 HP autotransformer starter. Draining out transformer oil from the oil tank and collecting in a suitable vessel. Taking out the damaged autotransformer coil assembly from oil tank. |
| 27 | Providing, preparation and fitting new copper coils of electrolytic grade copper strip windings having F-class insulation in place of damaged windings including allied costs such as varnish (Becks or any other reputed make), drying, etc., 13.6 kg per Legx 03 leg = 40.8kg |
| 28 | Providing, fitting and setting of electropneumatic timing relay with timing range upto 60s; coil voltage 415V AC (BCH make or equivalent) ,(2NO + 2NC) double block; ON delay |
| 29 | Providing, fitting and setting of single phase preventer Sz5 type relay of specified relay range (Make: L&t/Bentex or Equivalent) ) |
| 30 | Ampere Meter (0-1 to 0-50 A / 0-60 to 0-100 A) (Square Flush) |
| 31 | Volt Meter (0-1 to 0-60 V / 0-75 to 0-300 V/ 0-500 to 0-600 V) (Square Flush) |
| 32 | Credit the value of scrap copper as 95% weight of copper at S.no. 02 |
| 33 | Fitting of autotransformer coil assembly in the starter oil tank, refilling of collected t.oil in the tank, reconnecting all leads and load testing of the starter |
| 34 | Rewinding of 370 HP squirrel cage induction motor: Disconnecting of all motor leads, dismantling of motor, taking out the rotor from the stator and complete disassembly as per requirement of job. The job also includes removing of complete stator winding at workshop. |
| 35 | Mechanical transportation, loading, unloading, and handling of various items of induction motor to workshop, in a load carrier auto, mini-van or similar upto 30 km of lead. |
| 36 | Complete rewinding of stator coils as per old sample of 3-phase motor by providing and fitting of finished new elecrolytic grade copper windings having F-class insulation in place of damaged windings inculding allied costs such as labour, drying etc per Kg of winding approximately |
| 37 | Grade 3.1 Pre-compressed presspahn paper board (like Raman Sigmacom 3.1 or other make) for use as phase separator/ spacer/ axial ducts/ cylinder for core yoke insulation |
| 38 | Grade K pre-compressed Press Board of required thickness (like Senapathy or any other make) |
| 39 | Inter-leaved insulating paper between the layers of the winding Epoxy dotted Kraft Paper |
| 40 | Fiberglass cotton insulation tape 1-inch |
| 41 | Epoxy slot wedges |
| 42 | F-class fiberglass insulating sleeves (for stubbing, etc.) 6mm |
| 43 | Assembling of all motormotor and re installation at site after carrying out necessary repairs using tools and tackles and testing on full load. |
| 44 | Credit the value of scrap copper as 95% weight of copper at S.no. 03 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender