Tender For Repair/ Replacement Of Certain Repairs To Otm And Md Accommodation At Rms Chail Under Ge (I) Jutogh
Tender Value
18 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
18 days left
EMD
36000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/ Replacement Of Certain Repairs To Otm And Md Accommodation At Rms Chail Under Ge (I) Jutogh
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | Dismantling timber scantlings 40 Sqcm and over in section, in any position (Unframed work) complete all as specified and directed. |
| 3 | Dismantling Wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 4 | Demolition of brick masonry /stone masonry built in cement mortar including all quoins, pillars arches etc complete all as specified and directed. |
| 5 | S&F in repair IInd class hard-wood, timber fixed and clean sawn, in scantlings complete all as specified and directed. |
| 6 | M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with creosote complete all as specified and directed. |
| 7 | S&F in repair pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed. |
| 8 | S&F in repair pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified plain, galvanised, complete all as specified and as directed |
| 9 | M&L for exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber 8 mm suitably placed in false ceiling grid made of anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605 mm & hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including dismantling old ceiling complete all as specified complete all as specified |
| 10 | M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 11 | Taking down chowkats or frames without taking down shutters, not exc. 1.5 sqm. each complete all as specified and directed. |
| 12 | Taking down chowkats or frames without taking down shutters exc. 1.5 sqm but n. exc. 4 sqm each complete all as specified and directed. |
| 13 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant including holdfast of size 25x3 mm Flat iron required to fix chowkhat, complete all as specified and directed. |
| 14 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed. Note: Stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 15 | S&F for 2nd class hardwood 35 mm thick plain framed paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on boths face. The size of rail and stile as per IS:1003 (part-I) kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 16 | S&F for 2nd class hard wood 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc, without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing gauge, etc sizes of member of shutter as specified in SSR Part-I, Sec-8, Clause 8.24(a), complete all as specified and directed. |
| 17 | Taking down shutters of any description n exc 1 sqm each complete all as specified and directed. |
| 18 | Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed. |
| 19 | Providing and fixing factory made uPVC white colour casement (Open able) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + 0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm thick glazing withselected quality glass, complete all as specified and directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 20 | Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock, complete all as specified and directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) (A) Area exceeding 2.00 sqm each ® |
| 21 | S&F in repair galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. |
| 22 | S&F butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 23 | S&F butt hinge ISI Marked 75mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 24 | S&F 200mm long mild steel barrel tower bolts, stove enameled black, with bright bolt and fixed complete all as specified and directed. |
| 25 | S&F 150mm long mild steel barrel tower bolts, stove enameled black, with bright bolt and fixed complete all as specified and directed. |
| 26 | S&F 250mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 27 | S&F 150mm mild steel pressed handles, oval type, stove enameled black complete all as specified and directed. |
| 28 | S&F 125mm mild steel pressed handles, oval type, stove enameled black complete all as specified and directed. |
| 29 | S&F 300mm brass ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 30 | S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed. |
| 31 | M&L for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc., complete all as specified and directed. |
| 32 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces including finishing surface without using extra cement, complete all as specified and directed. |
| 33 | M&L for rendering 10mm thick in CM 1:6 on rough faces of brick work or concrete surfaces/stone work including finishing surface without using extra cement, complete all as specified and directed. |
| 34 | M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 35 | S&F glazed ceramic coloured tiles of size 300x450x7mm/ 250x350x7mm thick as in dados, skirting, wall etc set jointed and pointed in coloured cement to match the tiles over 10 mm thick rendering in CM 1:4, complete all as specified and directed. |
| 36 | M&L for non-skid coloured ceramic tiles/Matt finish 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18sqm but not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:6 for laying glazed tiles in floors etc., complete all as specified and directed. |
| 37 | M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick rendering in CM 1:4, complete all as specified and directed. |
| 38 | M&L for non-skid coloured ceramic tiles/ Matt finish 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:6 for laying glazed tiles in floors etc, complete all as specified and directed. |
| 39 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded & pointed in any mortar complete all as specified and directed. |
| 40 | M&L for 16-18 mm thick granite (of any type) work(table rubbed and polished)in steps, jambs, pillars, window-cills, cooking platforms and like in CM 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 41 | M&L for two coats of synthetic enamel paint over coat of pink primer on newly wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surfaces complete all as specified and directed. |
| 42 | M&L for preparing new plastered or unplastered surface of walls and applying two coats of OBD over a coat of 3 mm thick wall care putty as on walls complete all as specified and directed. |
| 43 | M&L for preparing new plastered or unplastered surface of walls and applying two coats of cement base paint, complete all as specified and directed. |
| 44 | S&F in repair Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed chromium plated 15 mm bore complete all as specified and directed. |
| 45 | S&F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated 15 mm bore, complete all as specified and directed. |
| 46 | M&L for 15mm bore tubes, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up & down steel water tubing complete all as specified and directed. |
| 47 | S&F in repair 15mm fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 48 | S&F in repair 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed . |
| 49 | Dismantling water tanks and removing to store exc 500 liters but n exc 1000 liters complete all as specified and directed. |
| 50 | S&F 1000 liter Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, in SSR Part I, complete all as specified and directed. |
| 51 | S&F in repair ball brass valves, high pressure, with polythene float and fly nut complete, screwed for 20mm iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 52 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe) etc., complete all as specified and directed. |
| 53 | S&F in repair vitreous china wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including pillar tap CP 15 mm bore, complete all as specified and directed. |
| 54 | S&F in repair 10 liters capacity PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe etc complete all as specified and directed. |
| 55 | S&F in repair mild steel chromium plated hand shower (health faucet ABS body) suitable for 15mm dia pipe with 8 mm dia 1.25 mtr long flexible tube and ABS wall hook including making connection, complete all as specified and directed. |
| 56 | S&F in repair CP brass wall mixture 3-in-1 system for mixing hot and cold water suitable for 15mm bore pipe complete with 115 mm long bend pipe, connecting legs & wall flange and wall bracket for hand shower, complete all as specified and directed. |
| 57 | S&F 600mmx450mm beveled edge mirror 5mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, as in repair complete all as specified and as directed by the Engineer–in–Charge. |
| 58 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 59 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender