Tender For Special Repair Of Building No 4/J/01 (12 X Jcos Md Accn) Under Ge (S) Binnaguri
Tender Value
1.13 Crore
Estimated cost
Bid Submission
07 Aug 2026
15 days left
EMD
1.88 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Building No 4/J/01 (12 X Jcos Md Accn) Under Ge (S) Binnaguri
BOQ
| Sl. No. | Item Description |
| 1 | PART-I : (B/R WORKS) Taking down chowkats with shutters (without taking off shutter from the frames) not exceeding 1.50 Sqm each complete all as specified and directed. |
| 2 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed. |
| 3 | Demolition and breaking up including removing salt glazed stoneware pipe 150 mm bore (internal) with concrete bedding and haunching complete including necessary earth work as required complete all as specified and as directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 5 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 6 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for, complete all as specified and as directed. |
| 7 | Taking down cement plaster of any description on brick or stone or concrete surface of wall & celing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 8 | Taking down eaves gutters and rainwater pipes CI/PVC/AC soil pipe including all fittings, heads, shoes, bends, swan-necks, etc. (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 9 | Dismantling water tanks and removing to store of capacity exc 500 & n . Exc 1000 ltrs, complete all as specified and as directed. |
| 10 | S&F of rotational moulded PVC water storage tank 1000 litres capacity conforming to IS-12701(1989) cylindrical vertical type multi-layered (not less than three layers) with closed top including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part-I, 2009 etc., complete all as specified and as directed. |
| 11 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation or for shafts, well, cesspits, pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 12 | Removing surplus excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting points in soft/loose soil complete all as specified and as directed. |
| 13 | Returning, filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm, soil complete all as specified and as directed. |
| 14 | M&L for hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders, complete all as per specified and as directed. |
| 15 | M&L for PCC (1:2:4) type B-1, (using 20mm graded crushed stone aggregate) as in filling and mass concrete for water tank platforms complete all as specified and as directed. |
| 16 | M & L for PCC(1:3:6) type C-2, (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed |
| 17 | M&L for PCC (1:3:6) type C-2, (using 40 mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and as directed. |
| 18 | M&L for precast reinforced cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in cover slab in drain/mainhole set in cement mortar (1:4) complete all as specified and as directed. |
| 19 | M&L for PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) as in copings, bed block for filling hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stone, bed plates, water troughs and the like including weathering, slightly rounded or champfered angles and throating as directed including necessary form work as required complete all as specified and as directed. |
| 20 | M&L for PCC 1:2:4 , type B1, 20mm graded aggregate as in kerbs, coping and other similar including form work (straight or curved), complete all as per specified and as directed. |
| 21 | Supply only integrated liquid water proofing compound complete all as specified and as directed. |
| 22 | M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6, complete all as specified and as directed. |
| 23 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6mtr mean radius in cement mortar 1:4, complete all as per specified and as directed. |
| 24 | M&L for brick work with fly ash old sized Bricks straight or curved on plan in CM 1:6 as in half brick thick walls, complete all as specified and as directed. |
| 25 | M&L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including griding & polishing with 15 mm thick screed bed or bedding layer of cement mortar (1:4) complete all as specified and as directed. |
| 26 | Ditto-all as per Item No.25.00 here-in-before but in skirting/dado over and including a backing coat of 10mm thick cement plaster in cement mortar (1:3) complete all as specified and directed. |
| 27 | Supply and fixing of factory made partly glazed i.e. upper panel will be wire mesh fitted externally in the clear space & lower panel will be plain colour PVC sheet 5mm thick PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as per specified and as directed. |
| 28 | M&L for providing & fixing factory made solid PVC cup board frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5 mm thick prelam/plain colour PVC sheet reinforce with 19mm x 19mm MS square tube of 19 gauge thickness throughout the frame and metre cut at two corners and jointed with 2 no's of 150mm long brackets of 15mm x 15mm MS square tubes. The door frame shall be fixed to the wall using 100mm long MS screws through the frame by using PVC fasteners. A minimum 4 no's of screws to be provided for each vertical member and minimum 2 no's of screws to be provided to the horizontal member etc., complete all as per specified and as directed. |
| 29 | S&F of factory made solid PVC door frame of size 50mm X 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing as mentioned in SSR Part-II (2020), Section 8, Page No. 178 complete all as specified and as directed. |
| 30 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 4 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with wood free EPS complete all as complete all as specified and as directed. |
| 31 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and as directed.Note: (a) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.(b) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 32 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length, complete all as specified and as directed.Note: (a) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.(b) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 33 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.Note: stainless steel butt hinges and necessary Stainless Steel screws shall be paid separately |
| 34 | S&F repair for providing and fixing factory mad PVC shelf /partition of required size consisting of 20 mm thick PVC sandwich with 1 mm thick plain PVC sheet on both sides suitably fixed in omplete all as specified and as directed. |
| 35 | S&F of Continuous (piano) hinges width of flaps (when open) in 40 mm, mild steel, bright finish or electrogalvanized, complete all as per specified and as directed. |
| 36 | S&F of 100 mm extruded brass handles, fabricated type polished, complete all as per specified and as directed. |
| 37 | S&F of 300 mm aluminum alloy, anodised , sliding door bolt with hasp and staple (bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified and as directed. |
| 38 | S&F of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor (overall length of cover plate 140mm) complete all as specified and as directed. |
| 39 | S & F 100 mm butt hinges stainless steel complete all as specified and directed. |
| 40 | S&F of 75 mm long aluminium, anodised, barrel tower bolts of extruded section( IS-204 (Part-2) : 1992) and fixed complete all as specified and as directed. |
| 41 | S&F of 200 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 42 | S&F of 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 43 | S&Fin repair 25mm dia curtain rod, chromium plated with fixing brackets etc. complete as specified and as directed. |
| 44 | M & L for Providing & fixing factory made solid PVC cup board shutter (flush type) of 24 mm thick made from co-extruded 3 layer regid PVC sheet (single extruded) with density not less than 500 kg/cbm outer layer (0.8 -1 mm ) thick should be of rigid PVC with density of not less than 1400 kg/ cbm manufactureed bayn ISO 9001-2015 certified company. Door should be water proof, turmite proof,fire reterdant and having good screw holding capacity complete all as specified and as directed incl taking down the external cupboard. |
| 45 | S&F Aluminium handles, 125 mm size cast type, anodised complete all as specified and as directed . |
| 46 | S & F in repair MS 300 mm , ordinary rat tail rod pattern springs incl. roller platecomplete all as specified and as directed. |
| 47 | S&F in repairs of brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges complete all as specified and as directed. |
| 48 | S & F Ball catches with 8 mm dia steel ball and brass body and striking plate incl. letting in and fixed, complete all as specified and as directed. |
| 49 | S & F in repairs of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and as directed. |
| 50 | S & F powser coated aluminium sliding windows for three track with rubber gusket, stopper powder coated aluminium standard beads / glazing clips, locking arrangenent etc aluminium frame of size 80 mm x 25 mm x 1.5 mm and shutter section 20 mm x 20 mm x 1.5 mm incl (two shutter of 4.8 mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm ) including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and all as specified as directed . |
| 51 | S & F powser coated aluminium louvered ventilators of size not exc. 0.50 Sqm. Area with glass louvers , without sash bars of aluminium section weighing not less than 0.650 kg/ mfor frame of size 40 x 20 x 2 mm including necessary jointing cleats , glazing cleats,rubber packing, anodside aluminium fittings and 5.5 mm thick tinted glass fixed panels with suitable locking arrangements including taking down of old existing steel ventilators and making good disturbed surface of wall complete all as specified and as directed. |
| 52 | S&F of TMT bars 6mm to 8mm dia and over cut to length bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 53 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed. |
| 54 | S&F in repair of 0.56 mm thick Plain, Aluminium sheeting, Alloy 31000 H4 bend to shape fixed with pins to door shutter to prevent water splashing, ridges, hips, valley gutters, drip and straight flashings over crumple joints complete all as specified and as directed. |
| 55 | M&L for 18 / 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium/timber frame work, complete all as per specified and as directed. |
| 56 | M&L for machine cut kota stone slab flooring 20-25mm thick, for staircase steps (treads) in single piece (of length not more than 1200mm), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including provn of two Nos 3x3 mm grooves at tread of each step laid over 15 mm thick screed bed or bedding layers in CM 1:6 complete all as specified and as directed. |
| 57 | M&L for machine cut kota stone 15-20 mm thick for staircase steps (risers) in single piece (of length not more than 1200mm), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and beewax polishing over 10 mm thick bedding layers in CM 1:4, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 58 | M&L for machine cut kota stone 15-20 mm thick for staircase steps (risers) in single piece (of length not more than 1200mm), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and beewax polishing over 10 mm thick bedding layers in CM 1:4, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender