Tender For Special Repair To Store Shed (Bldg No T-03, T-04) At Bso Ge Dehradun Under Age B/R-Ii Of Ge Dehradun And Provn Of Covered Shed Near Mt At Rimc Dehradun
Tender Value
32.98 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
18 days left
EMD
65960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Store Shed (Bldg No T-03, T-04) At Bso Ge Dehradun Under Age B/R-Ii Of Ge Dehradun And Provn Of Covered Shed Near Mt At Rimc Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition of brick work or stone masonry/stone slabs built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed. |
| 3 | Material and Labour for brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified. |
| 4 | Taking down cement plaster, from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing unserviceable material,outside of A 1 defence land complete all as specified and directed. |
| 5 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth, complete all as specified and as directed. |
| 6 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth, complete all as specified and as directed. |
| 7 | Material and Labour for white washing three coats on wall incl preparation of newly plastered surfaces.complete all as specified and directed. |
| 8 | Material and Labour for two coats of cement based paint over a coat of cement based primer to newly plastered surfaces including preparation of surfaces complete all as specified and directed. |
| 9 | Material and Labour for white washing two coats on wall including preparation of old plastered surfaces including preparation of surfaces complete all as specified and directed. |
| 10 | Material and Labour for preparation of old surface of wall and applying two coats of cement based paint of finish wall surface even and smooth, complete all as specified and directed. |
| 11 | Demolition of cement concrete (un-reinforced) in ground floors and paving n.exe 15cm thickness ( below or above ground level ) and including removing unserviceable material,outside of A 1 defence land complete all as specified and directed. |
| 12 | Material and labour for cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) for surface channels and drains complete all as specified and directed. |
| 13 | Material and labour for cement concrete 1:3:6 type C-1 (using 40mm graded stone aggregate) 75 mm thick as in sub bases of floor complete all as specified and directed. |
| 14 | Material and Labour for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection work/Hardstanding, and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified and directed. |
| 15 | Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in floor complete all as specified and directed. |
| 16 | Material and labour for 20-25 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry @ 3.0 Kg per sqm mixed with pigment to match the shade of the slab including necessary grinding, rubbing and polishing rounding to exposed edges including 15 mm thick screed bedding layer of CM 1:4 complete all as specified and directed. |
| 17 | Description all as per item No 15 above but as in skirting and including 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 18 | Material and labour for polished rubber moulded coloured machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming IS 15658-2006 of 60mm thickness, M-35 grade laid over and incl 25mm thick sand cushioning complete all as specified and directed. |
| 19 | Material and Labour for PCC (1:3:6) type C-1 (Using 20mm graded stone aggregate) as in cills, copings, bed blocks for hold fasts and the like including necessary form work etc complete all as specified and directed. |
| 20 | Material and Labour for RCC (nominal mix), type B1 1:2:4 using 20 mm graded stone aggregate as in beams, cantilevers, lintels and similar types of work including demoplition of old RCC all as specified and directed. |
| 21 | Material and Labour for RCC (nominal mix), Type B1 1:2:4 using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, shelves and similar types of work incl demoplition of old RCC all as specified and directed. |
| 22 | Material and Labour for use and waste of formwork to sides and soffits of floor, lintels band & beams including supports, overhangs, etc. with rough finished surface of concrete complete all as specified and directed. |
| 23 | Material and Labour for use and waste for form work to soffits of suspended concrete slabs for fair finished concrete surface flat surface complete all as specified and directed. |
| 24 | Supply and fixing of mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips ,complete all as specified and as directed. |
| 25 | Supply and fixing of mild steel TMT bars, 8mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups, spacer, binders, etc complete all as specified and directed. |
| 26 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each complete all as specified and directed |
| 27 | Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each complete all as specified and directed |
| 28 | Supply and fixing of stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails complete all as specified and directed. |
| 29 | Supply and fix for steel Butt Hinges medium weight,100 mm fixed to steel/wooden shutters complete all as specified and directed. |
| 30 | Supply and fix for steel barrel tower bolts 200 mm size, with bright bolt, complete all as specified and directed. |
| 31 | Supply and fix for stainless steel handles 150 mm size complete fixed complete all as specified and directed. |
| 32 | Supply and fix for steel sliding door bolts 'bolt type' 250 mm size stove enamelled black with and including 6 nuts and bolts complete fixed all as specified and directed. |
| 33 | Dismantling of asbestos cement/ galvanium aluminium (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 34 | Supply and fixing of pre- painted galvanium aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (AZ-150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, all as specified and directed. |
| 35 | Supply and fixing of prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick (AZ-150) of any colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 36 | Dismantling of timber scantlings 40 sq cm and over in section in any position in unframed work complete all as specified and directed. |
| 37 | Supply and fixing of roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410-W (Gde E-250) quality-A complete all as specified and directed. |
| 38 | Supply and fixing of mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staircase; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed. |
| 39 | Supply and fixing of 1mm thick mild steel, plain, black sheet as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed), wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed |
| 40 | Material and labour for preparation of new steel surfaces of any description over 10cm width & girth not otherwise described and applying two coats of synthetic enamel paint (Ist quality) over a coat of red oxid primer complete all as specified and directed |
| 41 | Surface excavation n.exc (not exceeding) 30 Cm deep and average 15 cm deep and getting out soft/loss soil complete all as specified and directed |
| 42 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed. |
| 43 | Material and Labour for cement concrete in foundation filling and mass concrete type D2 1:4:8 (40 mm graded stone aggregate) complete all as specified and directed. |
| 44 | Excavation in post holes or similar each n exc 0.50 Cum getting out, returning, filling and in ramming earth round in layer n exc 25 cm watering and removing surplus soil to a distance n exc 15 m and making good surface in soft/loose soil complete all as specified and directed |
| 45 | Supply and fixing of mild steel joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section, MS tubes, flats square bars etc fixed indepently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed. |
| 46 | Material and labour for preparation of newly plastered surface of walls including corners to receive the coats as per manufacturer directions and applying two coats of SmartCare Damp Proof Advanced of approved colour consist of fiber reinforced elastomeric liquid applied waterproofing membrane, formulated with select elastomeric and resilient acrylic polymers and reinforcing synthetic fiber which forms a thick, seamless, durable membrane upon curing and offers ultimate waterproofing complete all as specified and directed. Make:- Asian Paints Product Cose 5457 or Berger Home Shield Dampstop Elasto or Nerolac Perma No Damp + or equivalent. |
| 47 | Returning filling in including spreading, watring and well ramming in layer n.exc 25cm each in loose/soft soil complete all as specified and directed. |
| 48 | Removing excavated material exc 1.5 km & n exc 5 Km and depositing wher directed at a level n exc 1.5 m above the starting point in soil complete all as specified and directed. |
| 49 | Material and Labour for hardcore of broken stone of gauge n exc 63mm deposited, spreaded & levelled in layers n exc 15cm thick including watering and ramming etc complete all as specified and directed. |
| 50 | Material and Labour for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) inclusive finished even & smooth using extra cement complete all as specified and directed. Please Enable Macros to View BoQ information |
| 51 | Material and Labour for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) inclusive finished even & smooth using extra cement complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender