Tender For Special Repair To Servant Qtr At Bldg No Sm-147 To Sm-148 At Gaur Enclave Under Ge (Mcte) Mhow
Tender Value
31.06 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
17 days left
EMD
62120
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Servant Qtr At Bldg No Sm-147 To Sm-148 At Gaur Enclave Under Ge (Mcte) Mhow
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exc 4 Sqm each complete all as specified and directed. |
| 3 | Demolition of stone, brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work etc. complete all as specified and directed. |
| 4 | M&L for Brick work with Fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in half brick wall bulit in cement mortar 1:6 complete all as specified and directed. |
| 5 | S&F Solid single PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, edges will be painted to match with prelam sheet suppling & fixing in opening as per specification & drawing including all fixtures shown on drawing complete all as specified and directed. |
| 6 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge, Paneling of 2mm thick prelam PVC sheet on bothfaces i.e front face & back face with particle board core to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, and including all hardware necessary for a door supplying & fixing in the frame at site as per specification & drawing. given SSR 2010 complete all as specified and directed. |
| 7 | S&F pressed steel door frames of size 125 x 60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified directed. |
| 8 | S&F steel window with sude hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars/ guard bars dovetailed or welded complete all as specified directed. |
| 9 | S&F steel window or ventilator fixed type/ top hung type with glazing bars/ guard bars complete with glazing bars dovetailed or welded complete all as specified directed. |
| 10 | M&L for 4mm thick sheet glass ordinary quality and glazing with beading/ leaping/ oil putty in square n. exc. 0.5 sqm in each complete all as specified and directed. |
| 11 | S&F 35mm thick Flush shutters solid core construction with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. |
| 12 | S&F Factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass/ gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I section 8.20 (a), complete all as specified and directed. |
| 13 | M&L for stainless steel wire cloth, 0.71mm nominal dia of wire and average width of aperture 1.20mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. |
| 14 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required : hooks (stay), heavy for large gates, hook and pintle hinges: large hasps and staples; chains; hamd made sliding bolts; clamps; hold fasts; complete all as specified and directed. |
| 15 | M&L for PCC 1:3:6 Type C1(20mm graded aggregate) as in bed block for holdfast and filling door frame complete all as specified and directed |
| 16 | S&F 250mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed |
| 17 | S&F 100mm size of Butt hinges, medium weight cold rolled mild steel complete door etc complete all as specified and directed. |
| 18 | S&F aluminium anodised barrel tower bolts of extruded section with 100mm long bolt, complete all as specified and directed. |
| 19 | S&F aluminium anodised barrel tower bolts of extruded section with 200mm long bolt, complete all as specified and directed. |
| 20 | S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed |
| 21 | S&F Extruded aluminium alloy handles fabricated type anodised 100mm size complete all as specified and directed. |
| 22 | M&L for floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as specified and directed. |
| 23 | M&L for preparation of new steel or iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, comlete, complete all as specified and directed. |
| 24 | M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of filler coat with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finish, complete all as specified and directed. |
| 25 | S&F repair stainless steel curtain rod with brackets 25mm dia including necesary SS clamp complete all as specified and directed. |
| 26 | Demolition of cement concrete (including floor tiles, kota stone flooring etc) (un-reinforced) of any description and in any position not otherwise specifically provided for incl remoal the demolised materials to a distance exc 50 mtr and not exc 100 mtr complete all as specified and directed. |
| 27 | M&L for 75mm thick cement concrete 1:3:6, type C1 with using 20mm graded stone aggregate in floor/ plinth protection finish the surface even and smooth without using extra cement including forming constructions joints and filling the same with bitumen filler complete all as specified and directed. |
| 28 | M&L for forming constructions dummy joints 65mm deep x 10mm wide fillied with grade B sealing compound complete all as specified and directed. |
| 29 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed. |
| 30 | M&L for machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing with beeswex polish complete all as specified and directed. |
| 31 | All as per Srl item No. 30.00 here in beforebut in skirting complete all as specified and directed |
| 32 | M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 33 | All as per Srl item No. 32.00 above but, on vetical surface such as skirting including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed |
| 34 | M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 35 | M&L for Glazed Coloured ceramic tiles (textured and designed as required) in vertical surfaces size 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured epoxy grout for tile joint incl 10mm thick backing coat in CM 1:3 complete all as specified and directed. |
| 36 | M&L for Granite slabs (of any type) 20mm thick machine cut bedded laid over cement screed 15mm thick in CM 1:4 laid and jointed with grey cement slurry and pointed with white/ coloured epoxy grout for tile joint with admixture of pigment to match the shade of slab and polishing complete all as specified and directed. |
| 37 | Rounding to edges of stone slab slab one edge such as in steps, cooking platform, and other similar situation complete all as specified and directed. |
| 38 | S&F in repair vitreous china sqatting pan (orissa pattern) size 580mm x 440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and directed. |
| 39 | S&F in repair of PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 40 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 41 | S&F angular stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 42 | S&F Long body CP Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 43 | S&F chromium plated shower roses 125mm sizes with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 44 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 45 | Taking down old GI tubing ISI marked medium grade 15mm bore with all fittings including connection etc, complete all as specified and directed. |
| 46 | Taking down old GI tubing ISI marked medium grade 20mm bore with all fittings including connection etc, complete all as specified and directed. |
| 47 | Taking down old GI tubing ISI marked medium grade 25mm bore with all fittings including connection etc, complete all as specified and directed. |
| 48 | M&L for GI tubing ISI marked medium grade 15mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified and directed. |
| 49 | M&L for GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified and directed. |
| 50 | M&L for GI tubing ISI marked medium grade 25mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified and directed. |
| 51 | Cutting chases for concealed water tubing in brick wall and making good in CM 1:3 cutting n.exc 10cm girth. complete all as specified and directed. |
| 52 | S&F in repairs incl hoisting HDPE plastic water cylindrical vertical type tanks closed top of capacity 500 Ltrs incl 20mm bore brass stop cock and 20mm bore brass float valve with polythene float including removing the existing one complete all as specified and as directed. |
| 53 | S&F SS Sinks with drainage board in repair made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and including waste pipe complete all as specified and directed. |
| 54 | M&L for stainless steel plate rack of size 900 x 750 x 250 made up of of 1mm thick steel complete all as specified and directed. |
| 55 | S & F in repairs PVC (SWR) Floor trap/ Nahani trap of size 140 x 140mm plain or multi with stainless steel matt finish grating with locking type, fixed to epoxy solvent cement joint dia of outlet 75mm bore complete all as specified and directed. |
| 56 | S & F in repairs 110mm bore PVC (SWR) pipes single socket in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 57 | S & F in repairs 110mm bore PVC (SWR) pipes single socket in any length with rubber ring joints laid in floor or in trench complete all as specified and directed. |
| 58 | S & F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 59 | S & F 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 60 | S & F 75mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 61 | S & F 110mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 62 | S & F 110mm bore PVC (SWR) bend with acess door complete all as specified and directed. |
| 63 | S & F in repairs 75mm bore PVC (SWR) pipes single socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 64 | S & F 75mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 65 | S & F 75mm bore PVC (SWR) bend with acess door complete all as specified and directed. |
| 66 | S & F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 67 | S & F PVC waste pipe fixed to any type of coupling of 32/ 40mm threaded complete all as specified and directed. |
| 68 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 69 | M&L for 15mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, complete all as specified and directed. |
| 70 | M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement all as specified incl mixing with water proofing compound as per manufacturers instruction complete all as specified and directed. (WPC shall be measured and paid separately). |
| 71 | M&L for 10mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. on ceiling finished even and smooth without using extra cement, complete all as specified and directed. |
| 72 | M&L for complete removal of existing treatment and preparation of old surfaces and applying two coat Acrylic emulsion with roller over applying primer and including minimum 1mm thick white wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed. (Note:- primer and emulsion paint shall be carried out through air less spray machine (Mechanical means) |
| 73 | M&L for preparation of newly plastered surfaces and applying two coat interior Acrylic emulsion with roller over applying primer and including minimum 1mm thick white wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed. (Note:- primer and emulsion paint shall be carred out through air less spray machine (Mechanical means) |
| 74 | M&L for complete removal of existing treatment on ceiling surfaces including washing rubbing down and stopping of distempered and painted surfaces and applying two coats of oil bound distemper complete all as specified and directed. |
| 75 | M&L for preparation newly plastered surfaces of ceiling and applying chalk whiting primer on new plastered surfaces ceiling and applying two coat of oil emulsion distemper complete all as specified and directed. |
| 76 | M&L for complete removal of existing treament and preparation of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered/ decorated surface and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty complete all as specified and directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site and painting will be done by brush/ spray/ roller). |
| 77 | M&L for newly plastered/ decrated surfaces and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty complete all as specified and directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site and painting will be done by brush/ spray/ roller). |
| 78 | Supply only liquid water proofing compound complete all as specified and directed. |
| 79 | Demolition of reinforced cement concrete of any description and in any position not otherwise described complete all as specified and directed. |
| 80 | Formwork to sides and soffits of coping beam finished surfaces fair. complete all as specified and directed. |
| 81 | M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 82 | M&L for RCC 1:2:4 type B1 (using 20mm graded aggregate) as in Chajjas & roof slabs complete all as specified and directed. |
| 83 | M&L for taking down/ dismantled existing waterproofing treatment such as tar felt/ concrete tiles of any description from roof surfaces and removing rubbilsh to a distance not exc 100 mtrs complete all as specified and directed. |
| 84 | M&L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surfaces is green and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. (WPC shall be measured and paid separately). |
| 85 | M&L for preparation of surfaces and applying bituminous primer conforming to IS-3384-1986 @ 0.3 kg per sqm, complete all as specified and directed. |
| 86 | M&L for applying a tack coat of industrial bituem grade of 85/25 at the rate of 1.20 kg/Sqm including cleaning surface (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat would be paid separately), complete all as specified and directed. |
| 87 | M&L for 3mm thick APP based polymeric membrane minimum weighing 3kg/ sqm and reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. |
| 88 | M&L for cement concrete tiles 20cm x 20cm x 20mm thick machine pressed, set jointed neat cement slurry as on roof sarface incl cut and polished etc incl 15mm thick cement plaster in CM 1:4 complete all as specified and directed. |
| 89 | Dismantling of Pain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof coverings etc. complete all as specified and directed. |
| 90 | Dismantling of timber scantling as fillets, rails, posts, rafters, purlins, any section & any description complete all as specified and directed. |
| 91 | M&L Pre- painted galvalume aluminum zinc coating GI based profile steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150gm/ sqm of coating (total both surfaces) as in roof covering/ cladding to wall, including flashings, ridges valley etc fixed with self tapping screws complete all as specified and directed. |
| 92 | S&F Steel work in tubular trusses, purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 etc. complete all as specified and directed. |
| 93 | Identify the cracks and construction joints, honeycomb areas in slabs/ beams/ columns, shall be chased open into 'U' groove shape and sealed with High strength, fiber based cementitious mortar, Fosroc Renderoc SP40. Providing and fixing 6-8mm dia nozzle along the joints and honeycomb areas after proper surface preparation. The injection of conbextra EP10 through the nozzle till the refusal of the grouting materials. |
| 94 | M&L for Reinforced cement concrete type B-1 (1:2:4) (20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves as complete all as specified and directed. |
| 95 | M&L for Fromwork rough finish to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 96 | M&L for concrete surface should be thoroughly abraded to remove all loose dust, dirt, laitance. Any trace of loose plaster, oil grease and any other material that might affect adhesion is to be removed by grinding/ wire brushing the surface. The entire surface shall then be washed thoroughly with plenty of water and then allowed to dry. All the dust, dirt, loose particles etc shall be removed. |
| 97 | M&L for Cleaning as directed & specified all rust/ scales/ corrosion from reinforcement bars using rust remover of approved makes with combination of acid based material, corrosion inhibitors and dispersing agents complete all as specified and directed. |
| 98 | M&L for applying one coat of Anti corrosive @ 0.25 ltr/ sqm or as per manufacturer instructions to old and new reinforcement to the full circumferance and length of bars complete all as specified and directed. |
| 99 | Repair to damaged RCC structures, jacketing, and strengthening works, by using non shrink cementitious micro concrete mixed 12.50mm graded stone aggregate using rendroc RG of fosroc or techo commercially equivalent in pidilite by weight (18 Kg:25 Kg Rendroc RG) respectively as per manufacturer instructions laid in an average thikness 50 to 100mm in surface of coloumns, beams, chajjas, slab and similar structural members incl necessary water tight form work complete all as specified and directed. |
| 100 | Providing & applying Nitotile EPW or equivalent hygienic, stain-resistant to joints of tiles and stone slabs (size of joints -2/3/4mm width x thickness of tiles) complete all as specified and directed. |
| 101 | S& F 18mm thick factory made PVC sheet one side coloured pre laminated/ both side white colour sheet kitchen cabinet shutter/ cupboard shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for making edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bodning etc complete all as specified and directed. |
| 102 | S&F factory made PVC shelf/ partition of required size consisting of panel of 12mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provide 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the fronth of the self/ partition to be edge lipped by 18mm width x 1mm thick PVC sheet of density 600kg/cum manufactured by ISO 9001-2015 Certified company using solvent cement etc complete all as specified and directed. |
| 103 | S&F stainless steel shelf closing hinges 75mm size for PVC door shutters complete all as specified and directed. |
| 104 | S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed. |
| 105 | S&F 100mm size MS mat/ glossy finish handle complete all as specfied and directed. |
| 106 | Excavation in trenches not exc. 1.5m wide and not exc 1.5m in depth for foundation etc. for shafts, wells cesspits, manholes, piers holes etc. not exceeding 1.5 mtr in depth and getting out in loose/ soft soil etc. complete all as specified and directed. |
| 107 | Demolition and breaking up drain pipes 150mm dia (Salt Glazed ware, AC or reinforced concrete) set in cement motar etc. comlplete all as specified and directed. |
| 108 | M&L for Pre-cast cement concrete (1:2:4) type B-1 using 20mm graded stone aggrgates) set in CM 1:4 as in landing, cover slab (for manholes etc) chulla hoods, chajjas, water trough, mangers, shelves and similar article with plain faces including form work complete all as specified and directed. |
| 109 | M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggrgates as in coping, chajja kerbs, roof padding/ staging of water tank etc. including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 110 | M&L for cement concrete type D-2 1:4:8 using 40mm graded stone aggregate) in foundation filling the mass concrete complete all as specified and directed. |
| 111 | M&L for 150mm dia salt galzed stone ware (SGSW) drain pipe, grade 'A' laid in trenches and jointed complete all as specified and directed. |
| 112 | M&L for cement concrete type B-2, 1:2:4 using 20mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 113 | M&L for cement concrete 1:3:6 type C-2 for 150mm dia in bed to drain pipes including packing under, and haunching against the sides of pipes etc complete all as specified and directed. |
| 114 | Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed. |
| 115 | Removing excavated material/ Debries obtained from demolition to a distance not exc. 50 m and depositing where directed etc. complete all as specified and directed. |
| 116 | Taking down carefully copper/ aluminium point wiring (light, fan, sockets or power) complete including all fitings and fixtures such as switches, sockets, ceiling roses, pendens, regulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed. |
| 117 | Taking up/ down existing ceiling fan and exhaust fan of any size and re-fixing the same after B/R work including servicing/ overhauling, winding of the fan, replacement of defective parts, painting of the complete fan with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter and providing three core flexible copper cable for connection from ceiling rose/ connector complete all as specified and directed. |
| 118 | Taking down carefully copper/ aluminium sub-main wiring any size from surface/ concealed/ existing of any height and removing matrials at site and making good the disturbed surface of walls and floors roofs etc. complete all as specified and directed. |
| 119 | M & L for Point wiring for One light/ bell controlled by one, one way switch 5/6 Amps with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular flush box with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc., complete all as specified and directed. |
| 120 | All as per Srl item No. 126.00 above but fan point controlled by one, one way switch 5/6 Amps and regulator |
| 121 | All as per Srl item No. 126.00 above but One 3 pin, 5/6 Amps switch socket outlet point on same board controlled by one, one way 5/6 Amps switch |
| 122 | All as per Srl item No. 126.00 above but One 3 pin, 5/6 Amps switch socket outlet point on independent board controlled by one, one way 5/6 Amps switch |
| 123 | All as per Srl item No. 126.00 here in before but using 2.5 Sqmm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket cobmination point including necessary running of 2.5 Sqmm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed.Note:- Make of modular GI box should be same with switch/ socket. |
| 124 | S&F Modular Switch flush type 5/6 Amps single pole, one way complete all as specified and directed. |
| 125 | S&F Modular Switch flush type 15/16 Amps single pole, one way complete all as specified and directed. |
| 126 | S&F Modular Socket outlet, multi purpose having provision, 3 pin, 5/6 Amps and 2 pin, 5/6 Amp, 2 Modular piano flush type complete all as specified and directed. |
| 127 | S&F Modular Socket outlet, multi purpose having provision, 3 pin, 15/16 Amps and 3 pin, 5/6 Amp, 2 Modular piano flush type complete all as specified and directed. |
| 128 | S&F modular bell push flush type, 5 Amp complete all as specified and directed. |
| 129 | S&F for Ceiling rose, surface bakelite with three terminals ISI marked, AC, 50 HZ, 230V, complete all as specified and directed. |
| 130 | S&F Buzzer Ding Dong AC 230 Volt single pole, complete all as specified and directed |
| 131 | M&L for Sub main wiring with approval colour coding as per IS with two single core PVC insulated FRLSH cable multistranded copper conductor if size 4 Sqmm nomonal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories heavy duty ISI marked of suitable size including concealed in wall etc. one runs of PVC insulated with 4.0 Sqmm (nomonal area) multistranded copper conductor FRLSH cable as earth wire complete all as specified and directed.Note:- Two runs of 4.0 Sqmm for P and N and one run of same size earth and one run of PVC conduit will be measured as one unit length. |
| 132 | S&F lamp holder PVC/ Polycarbonate type with back plate suitable for batten/ slanting fittings, complete all as specified and directed. |
| 133 | S&F LED bulb of 10 watt, of base B-22, 6500 K suitable for fixing in lamp holder, complete all as specified and directed. |
| 134 | Supply and fixing Inverter LED batten 4 feet 20 watt with squre profile and polycarbonate channel. Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 3 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified and directed. |
| 135 | S&F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaires with opel diffuser pre wired and necessary mounting arrangements and provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb including taking down old unsv fitting, complete all as specified and directed. |
| 136 | S & F for Energy saving new generation environmental friendly long life versatile LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete including necessary mounting arrangements and provision of 2.5 Sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting and necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts including taking down old unsv complete all as specified and directed. |
| 137 | S&F of MCB DB SPN 8 way dounle door with 200 Amp rated bus bar, 230 volts 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc including taking down old unsv DB and making good of disturbed surface to match with existing colour of wall complete all as specified and directed. |
| 138 | S&F MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. |
| 139 | Supply and fix MCB SP 6 to 32 Amps 10 KA, 'B' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed. |
| 140 | S&F in replacement of exhaust fan, steel body, AC single phase 230/ 240 V of size 300mm sweep complete with blade, frame including making/ alteration of hole wherever necessary making good disturbed surfaces painting to match with existing surfaces and deposite and exhaust fan to MES E/M store complete all as specified and directed. |
| 141 | Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 250mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed. |
| 142 | S&F of ceiling fans complete with blades, down rods 15mm/ 12mm upto two mtr, run with electronic regulator or remote with battery and complete accessories, 230 V, 50Hz, 1200mm sweep and winding material super enameled copper wire rated power 28W (+10%) and rate speed 350 RPM (+10%) power factor 0.90 Min air delivery 220 CFM with service value shall not be less than 7.85 BEE as per BIS. Five star rated with brushless direct current motor (BLDC), painting to match with existing surfaces including taking down old unsv fans and deposit the same in the MES store yard of AGE E/M-III, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender