Tender For Providing, Fitting And Improvement Of Electro Mechanical Components At Water Supply Scheme Chenani Including Repair Of 250 Kva Electric Transformer, Rewinding Of 100 Hp Motors, Providing And Fitting Of New Submersible Pump Set-2No. Replace
Tender Value
5 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing, Fitting And Improvement Of Electro Mechanical Components At Water Supply Scheme Chenani Including Repair Of 250 Kva Electric Transformer, Rewinding Of 100 Hp Motors, Providing And Fitting Of New Submersible Pump Set-2No. Replacement Of Copper And Aluminum Cables, Submersible Cable Etc. Water Supply Scheme Chenani
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Jul-2026 | 2026_PHE_315418_1__PPP | Date | 20-Jul-2026 |
| 2 | 20-Jul-2026 | 2026_PHE_315418_1 C | Date | 23-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Providing, fitting and improvement of electro mechanical components at WSS Chenani including repair of 250 KVA electric transformer, rewinding of 100 HP motors, providing and fitting of new submersible pump set-2no. Replacement of copper and aluminum cables, submersible cable etc. WSS Chenani |
| 2 | Providing of horizontal submersible mono bloc pump sets (2nos.) with following specifications:-Make-kirloskar / KSB / CRI / or other equivalent make at pumping station Chenani stage-0.discharge-10000 GPHHead- 21-29 meter head Motor make- KSB/CRI / or other equivalent makevoltage-400+15%Job further includes design, fabrication, installation, testing and commissioning of 185 ampere rating, 3 phase, LT control panel cum protection panel cum automatic star delta starter by way of fabrication of panel with 3 pole Main and delta power contactors of 185A rating 01 no. each and star power contactor of 110A rating-1no., complete with all protection, safety and control devices / mechanism compatible with the design / rating of the prime mover, of reputed make, conforming to ISI standards. The system should be provided with fault analyzer cum controller unit or equivalent of standard and reputed make. The complete system should be enclosed in MS steel enclosure box of suitable dimensions. The enclosure should be finished with powder coated painting from inside as well as from outer surface of approved colour. Providing / laying of copper conductors of proper rating alongwith insulation material as per site requirement. The enclosure should be front shutter mounted with key locking system having glass window. Digital electronic voltmeter & ampere meter should be provided along with the required current transformer and selector switches. The internal control wiring should be done with flexible PVC LT cable with proper thimbling at each end. The system should trip the motor on power failure and on appearance of an electrical fault mentioned below which may otherwise damage the motor field coils and should not restart automatically until unless the system is reset manually, thus providing automation to the system and protection to the motor .The system / star delta auto starter should not fall into delta if it does not fall into star mode first and should remain de-energised to avoid damage to the motor / machinery and also to the power source / transformer. The system / star delta auto starter should trip off if it does not fall into delta & remains in star mode for more than 10-20 seconds. The system shall provide protection against:-Low voltage below 350 V, High Voltage above 450 V, Single phasing, Reverse phasing, Un Balanced phasing, Dry running, Overloading. In addition the system should have the following audio & visual features for a quick and accurate diagnosis of the appeared fault / status for a speedy rectification of the system-- Separate LED fault / status indicators, LED phase indicators. Isolation by pass system, for fault analysis of system, with a blinking indicator. An audio warning system/Siren which activates only on starter failure to trip the motor on appearance of any electrical fault mentioned above, to warn the operator to switch off the motor manually.3 LED, contactor ‘COIL OK’, indicators, one for each of the contactors / coils. LED star & delta indicators to access the star to delta timing. A tamper proof starting system to avoid manipulations by the motor operator to keep the system in a permanently ON position Testing of panel after making all incoming / outgoing connections on no load and then on full load. Proper earthing of equipment shall be done. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools and tackles etc. Providing and fitting of MCCB-2nos. alongwith allied works at pumping station Chenani stage-1st by way of extraction of damaged MCCB and then providing and fitting of new 300 ampere 50 KA -MCCB of reputed. Job further includes Providing and fitting of 240mm2 aluminum cable single core at pumping station Chenani stage-1st .The job involves isolating the transformer from incoming HT power and removal/extraction of damaged / burnt aluminum cable approximately 120 meters in length from transformer to bus bar and subsequently providing and fitting of new aluminum cable 240mm2 single core of ISI standards with proper thimbling and insulation at each end. Complete job includes cost of material, labour charges, hire charges of tools and tackles, manual carriage etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 20, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 23, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender