Tender For Special Repair To Building No T-170 At Kalimpong Mil Stn Under Ge 867 Ews
Tender Value
7.76 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
4 days left
EMD
15520
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalimpong → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Building No T-170 At Kalimpong Mil Stn Under Ge 867 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 3 | S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 4 | Dismantling wrought iron or mild steel work of any description. |
| 5 | S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed. |
| 6 | S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed. |
| 7 | Dismantling of wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified. |
| 8 | Providing & fixing with fully perforated 12mm thick micro tegular edged or 10mm thick square edged GRG false ceiling tiles for false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS-8225 : 1987, Non-combustible as per BS 476 (Part-4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main - T runners of size 15 x 32 mm of length 3000mm, cross - T of size 15 x 32mm of length 1200mm and secondary intermediate cross - T of size 15 32mm of length 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm, Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm centre to centre and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction of the Engineer-in-charge. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 10 | M & L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) placed in any position complete all as specified and directed. |
| 11 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed or bedding layer for laying floor finishes in CM (1:6) etc complete all as specified and directed. |
| 12 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4) etc complete all as specified and directed. |
| 13 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed or bedding layer for laying floor finishes in CM (1:6) etc complete all as specified and directed. |
| 14 | S&F glazed ceramic coloured tiles 7 to 8mm thick 450 x 350mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4) etc complete all as specified and directed. |
| 15 | Demolition of stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar etc complete all as specified. |
| 16 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick Screed bed or bedding layer in CM 1:6 etc completecomplete all as specified. |
| 17 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each all as specified and directed. |
| 18 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (without taking off shutters from the frames). |
| 19 | S&F Solid PVC Door Frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet used and edges will be painted to match with printed sheet including reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 20 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o ) used instead of exposed portion of PVC sheet beading. colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 21 | S&F 100 mm long butt hinges extruded brass bright polished Type B-11 fixed with screws complete all as specified. |
| 22 | S&F 150mm long Aluminium anodised tower bolts of extruded section fixed with screws complete all as specified. |
| 23 | S&F 150 mm long Aluminium anodised handles extruded section fixed with screws complete all as specified. |
| 24 | S&F for pressed steel frames of size 125 X 60mm for door frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc (thickness of sheet shall be 1.25mm) etc., complete, as specified. |
| 25 | S&F Pressed steel frames of size 105 x 60mm for door frames with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc (thickness of sheet shall be 1.25mm) etc., complete, as specified. |
| 26 | M&L PCC (1:3:6) type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and as directed. |
| 27 | S&F 2nd class HW 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I)kiln seasoned and chemically pressure treated. |
| 28 | S&F 2nd class HW 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part - I, Section 8, Clause 8.24 (a) and fitted to chowkats complete all as specified and directed. |
| 29 | S&F in repairs 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 30 | S&F 300mm long Aluminium alloy anodised Sliding bolt with hasp, staple(bolt type and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as directed by Engr-in-Charge. |
| 31 | S&F 200mm long Aluminium anodised barrel tower bolts of extruded section etc complete all as specified. |
| 32 | S&F 150mm long Aluminium handles cast type anodised complete all as specified. |
| 33 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 34 | S&F 18/19mm thick WPC (Wood Plastic Composite) grade 1 quality with both sides decorative faces with choice colour fixed with screws including fillets (square/rectangular) and frame work etc for Kitchen cabinets/partations/boxes/cubics of water and termite resistant etc., complete all as specified. |
| 35 | S&F 75mm MS cold rolled Parliament spring hinges etc. for Kitchen cabinet shutters fixed with screws etc., complete all as specified. |
| 36 | S&F 75mm aluminium handles cast type anodised etc., complete all as specified and directed. |
| 37 | S&F Ball catches/magnite catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed etc. complete all as specified. |
| 38 | S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified. |
| 39 | S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified. |
| 40 | S&F steel window or ventilator fixed type with glazing bar complete all as specified. |
| 41 | S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specified and directed. |
| 42 | S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-290 Gde E-165 etc. complete all as specified. |
| 43 | S&F 3mm thick sheet glass ordinary quality in squares n.exc 0.50sqm each pane complete all as specified. |
| 44 | S&F 3mm thick figured glass, pin head type in square n.exc 0.50 sqm in each pane complete all as specified. |
| 45 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 46 | S&F 20mm dia Harrison rails (curtain rod/curtain rails)of SS/Chromium plated with fixing brackets, stops, rollers for doors and windows etc. complete all as directed by Engr-in-Charge. |
| 47 | Demolition and breaking up drain pipes of internal dia of pipe up to 100/110mm as (Salt glazed ware, AC, PVC or RCC) set in cement mortar etc. complete all as specified. |
| 48 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors etc. complete all as specified. |
| 49 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps etc. complete all as specified. |
| 50 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with clamps etc. complete all as specified. |
| 51 | S&F 110 mm bore PVC (SWR) bend any radius with access door etc. complete all as specified. |
| 52 | S&F 75 mm bore PVC (SWR) bend any radius with access door etc. complete all as specified. |
| 53 | S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door etc. complete all as specified and directed. |
| 54 | S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door etc. complete all as specified and directed. |
| 55 | S&F 110 mm bore PVC (SWR) 'P' trap etc. complete all as specified. |
| 56 | S&F 75 mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement etc. complete all as specified. |
| 57 | S&F 110mm bore PVC (SWR) vent cowl etc. complete all as specified. |
| 58 | S&F 75mm bore PVC (SWR) vent cowl etc. complete all as specified. |
| 59 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store etc. complete all as specified. |
| 60 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store etc. complete all as specified. |
| 61 | Supply & Laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 62 | Supply & Laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 63 | M&L for 20mm outer dia Brass Elbow fittings on walls/ceiling or laying in floors complete all as specified. |
| 64 | M&L for 20mm outer dia Brass Tee fittings on walls/ceiling or laying in floors complete all as specified. |
| 65 | M&L for 20mm outer dia Brass Union fittings on walls/ceiling or laying in floors complete all as specified. |
| 66 | M&L for 20mm to 25mm (3/4 x 1/2) outer dia Brass reducer/Elbow fittings on walls/ceiling or laying in floors complete all as specified. |
| 67 | M&L for 20mm outer dia Female Brass threaded adaptor (FTA/FBTA)fittings on walls/ceiling or laying in floors complete all as specified. |
| 68 | M&L for 25mm outer dia Brass Elbow fittings on walls/ceiling or laying in floors complete all as specified. |
| 69 | M&L for 25mm outer dia Brass Tee fittings on walls/ceiling or laying in floors complete all as specified. |
| 70 | M&L for 25mm outer dia Brass Union fittings on walls/ceiling or laying in floors complete all as specified. |
| 71 | M&L for 25mm outer dia Ball valve fittings on walls/ceiling or laying in floors complete all as specified. |
| 72 | S&F in repairs Vitreous china wash down water closed pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc with necessary lean cement concrete including plastic water closet seat cover of closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device etc. complete all as specified and directed. |
| 73 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified. |
| 74 | S&F Toilet paper holder with flat recessed type stainless steel complete all as specified. |
| 75 | S&F in repairs PVC low level flushing cistern of 10 Ltr capacity, valveless syphonic action type complete white with inlet, ball valve, float and handle including brackets etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed. |
| 76 | S&F in repairs Vitreous China wash basin, flat back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets and waste coupling of 40mm bore dia brass, chromium plated with long screwed shanks, plugs (waste) with rings and fly nuts, flange end bedded in red lead cement and other end fixed etc. complete all as specified and directed. |
| 77 | S&F 15mm Brass CP Quarter turn basin mixure for mixing hot & cold water screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for pipe and fixed etc. complete all as specified. Make : Jaquar (CQT-CHR-23309B) or equivalent as approved by GE. |
| 78 | S&F in repairs 15mm bore chromium plated stop valve with wall flange, screwed both ends for iron pipe or for unions and fixed etc. complete all as specified. |
| 79 | S&F 15 mm bore PVC connection of 450 mm long with PTMT nuts and PVC washers etc. complete all as specified. |
| 80 | S&F in repair 15 mm bore chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 81 | S&F in repairs 125mm size Brass chromium plated shower rose with arm including fixing with or without swivel joints to steel pipe or union complete all as specified and directed. |
| 82 | S&F 15mm CP Brass Quarter turn wall mixer 2 in 1 System-FLR with Provision for Overhead shower with 115 mm Long Bend pipe of make JaquaR (CQT-CHR-23273UPR) or equivalent complete all as specified and directed. |
| 83 | S&F in repairs Soap dish, fixed to plugs with chromium plated brass screws etc. complete all as specified and directed. |
| 84 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 85 | S&F in repairs brass chromium plated tubular towel rail of 20mm dia D' type 60cm long between flanges complete all as specified. |
| 86 | S&F in repairs Grating square fitting (Boxtype) of size 150mm made in two parts for smell and mosquito proofing with minimum 25mm water seal etc. complete all as specified. |
| 87 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, of any size mounting on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers, etc. complete all as specified. |
| 88 | S&F in repairs of 1mm thick stainless steel sink with drainage board kitchen or laboratory type with waste pipe, plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size of sink 915mm x 460mm and bowl size 410mm x 330mm x 160mm etc. complete all as specified. |
| 89 | S&F 15mm CP Brass Quarter Turn Stainless Steel Sink mixure, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe and fixed complete all as specified and directed. Make : Jaquar ((CQT-CHR-23309) or equivalent as approved by GE. Make : Jaquar or equivalent as approved by GE. |
| 90 | S&F in repairs kitchen plate rack made out of stainless steel 0.50 mm thick sheet with partitions and size of rack 800 x 250 x900 mm with shape and pattern as per sample kept in Sample room of GE Office complete all as specified and directed. |
| 91 | Demolition of brick work or stone/boulder masonary buit in cement mortar including all quions ,arches ,pillars etc but excluding ashler facing dressed stone work and precast concrete and directed. |
| 92 | M&L brick work with sub class `B' bricks straight or curved on plan exc 6.0m mean radius built in cement mortor (1:6) complete all as specified. |
| 93 | Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 94 | Rendering 5mm thick in cement mortar in (1:3) on ceiling etc. complete all as specified. |
| 95 | Rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces etc. complete all as specified. |
| 96 | Rendering 15mm thick in cement mortar in (1:4) on other than fair faces of brick work or concrete surfaces etc. complete all as specified. |
| 97 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth on stone, concrete block or slab walls etc. complete all as specified. |
| 98 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and directed. |
| 99 | M&L for reinforced cement concrete type B1 (1:2:4) (20mm graded aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 100 | Formwork to soffits of suspended slabs such as roof slabs, cooking plotforms, shelves including supports, overhangs, edges in flat with fair finished surfaces of concrete etc. complete all as specified. |
| 101 | Providing precast RCC (1:2:4) type B-I (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 including necessary formwork complete all as specified.Note: Reinforcement shall me measured and paid for separately. |
| 102 | S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 103 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil all as specified and directed. |
| 104 | M & L for PCC 1:3:6 type C-2 as in Concrete bed to drain pipes including packing under and haunching against the side of pipe after they are laid and tested for 100/110 mm dia bore of pipe complete all as specifieed. |
| 105 | M&L for cutting into existing manholes for connecting new drains up to 100/110mm dia pipe , making good to pipe and rendering, cutting cut existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required etc. complete all as specified. |
| 106 | Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase raillings and similar work including attached pillasters, buttresses, ect; vertical or to batter finished the surface fair complete all as specified and directed. |
| 107 | M&L for PCC (1:3:6) Type C-2 as in surface channels and drains complete all as specified. |
| 108 | Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete with using extra cement incl. forms moulds, mitred / stoped ends complete all as specified and directed. |
| 109 | M&L for rendering 10mm thick in cement mortar 1:4 including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 110 | Returning filling in , including, spreading, levelling, watering and well ramming in layers not exc 25cm in soft / loose soil complete all as specified. |
| 111 | Removing of excavated soil not exceeding 50m and depositing where directed at a level not exc 1.5 M above the starting point all as directed by Engr-in-charge. |
| 112 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness.complete all as specified and directed. |
| 113 | M&L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded crushed stone agg as in plinth protection/ path laid slope of 1 in 12 and finshing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges or as directed by engr -in-charge. |
| 114 | M&L for 100mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) in sub base of flooring etc., complete all as specified and directed. |
| 115 | S&F Chequered cement concrete tiles 30 cm x 30 x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM (1:4) complete all as specified and directed. (Glazed type tiles colour and deisgn as approved by the GE) |
| 116 | M&L Cement concrete type B-0, (1:2:4) (12.5 mm graded aggregate) as in coping, mud stop etc complete all as specified and directed. |
| 117 | M&L preparation of new wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 118 | M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 119 | Preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint all as specified. |
| 120 | Preparation of old painted surface of steel surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying one coat of synthetic enamel paint all as specified. |
| 121 | All as per item no.120 above but n.exc 10cm width or girth etc., complete all as specified and directed. |
| 122 | M&L for preparation of new surface/undecorated surfaces of ceiling and applying three coats of white wash on plastered surfaces etc. complete all as specified. |
| 123 | M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of chalk whiting priming paint over 1mm thick wall care putty in two coats complete all as specified. |
| 124 | M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of chalk whiting priming paint complete all as specified. |
| 125 | Preparation of old surface of ceiling and applying one coat of white washing complete all as specified and directed.Note : Preparation including brooming down or steel wire brushing scrapping down smoke soot moulds moss and efflorescent salts and trading oil and greasy spots, removing of nails, cracks making good holes by putty etc, spreading and removing coverings to doors, windows, floors fittings to protect them from splashes, washing floors, cleaning glass, joinery, fittings, drops, splashes, leaving premise clean and tidy etc. all as specified in SSR Part - II Para 15.2.1. |
| 126 | M&L for complete removal of existing treatment of wall surfaces and applying two coats of Oil bound distemper over a coat of chalk whiting priming paint over 1mm thick wall care putty in two coats complete all as specified. |
| 127 | M&L for complete removal of existing treatment of wall surfaces and applying two coats of Cement Base Paint of approved tint over a coat of chalk whiting priming paint complete all as specified. |
| 128 | Taking down carefully unserviceable copper/aluminium point wiring of any description including all fittings & fixtures (switch , socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed. |
| 129 | Dismantling and taking down unserviceable main switches, DBs etc. any type / size and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed. |
| 130 | M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor with proper colour coding drawn through and including PVC conduit (medium grade) with all fittings and accessories ISI marked concealed in wall/fixed to roof,ceiling etc incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) connected to common earth dolly incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall with modular back plate and top cover for mounting switch, sockets etc including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc for one light/Bell/Exhaust fan point controlled by one, one way switch 5/6 Amps. complete all as specified & as directed. |
| 131 | All as per item No 130.00 here in before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on the same board. |
| 132 | All as per item No 130.00 here in before but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent board. |
| 133 | All as per item No 130.00 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 15/16 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 134 | Supply and fix Modular switch 1 way 6 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 135 | Supply and fix Modular switch 1 way 16 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 136 | Supply and fix Modular Bell push 6A 1 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 137 | Supply and fix Bell, Ding Dong electric AC 230 Volts single pole complete all as specified and as directed. |
| 138 | Supply and fix Socket, 6A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 139 | Supply and fix Socket, 6A/16A-2/3 pin combined 2 module 230 Volts,50Hz, ISI marked all as specified and as directed. |
| 140 | Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. |
| 141 | Supply and fixing Modular angle holder insulated body with back plate for batten fitting all as specified and as directed. |
| 142 | Supply and fixing 10W LED retro fit B-22 holder base with poly carbonate body and aluminium heat sink, complete all as specified and directed. |
| 143 | Supply and fixing LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) complete all as specified and directed. |
| 144 | Supply and fixing LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor >0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) range 150-270V AC as per IEC standard all as per specified and directed. |
| 145 | Supply and fixing Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed. |
| 146 | Supply and fixing in repairs LED 2X2 PANEL 36 W 3000/6500 K Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong /Grid ceiling complete all as specified and directed. |
| 147 | Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, including lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 148 | S & F LED light fitting 1x9W/1X10W IP66 & IK09 integral LED Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unserviceable fitting complete all as specified and as directed. |
| 149 | Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC, concealed in wall complete all as specified and as directed. |
| 150 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP 40 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 151 | Supply and fixing in repairs 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP 6 to 32 AMP capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 152 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. |
| 153 | M&L for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLSH including drawing into 25 mm PVC conduit concealed in wall/roof including taking down of old unservicible sub main wiring complete all as specified and directed.(Note three run of 6 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length). |
| 154 | Supply and fixing electric water heater storage type wall hanging mounting type with powder coated metallic body BEE 5 Star rated with diamond glass lined inner tank with maximum operating pressure of 8 bars incuding factory fitted thermostat maximum 75 Celsius with automatic thermal cutout and multifunctional saftey valve inculding suitable nuts & bolts for fixing arrangement operates on 230V ,maximum power consumtion -2kW of capacity 25 Ltrs , with all accessories and connection pipe 15mm bore 2 Nos for hot and cold water supply,geyser saftey cord complete including taking down old u/s Geaser & deposit to MES Store complete all as specified and directed. |
| 155 | Supply and Fixing exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including fixing arrangement including taking down old U/S Exhaust fan and deposit to MES Store as directed by Engineer-in-charge. |
| 156 | Supply and Fixing exhaust fan, PVC body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including fixing including fixing arrangement including taking down old U/S Exhaust fan and deposit to MES Store as directed by Engineer-in-charge. |
| 157 | Supply and fixing in repairs of DBOX type MCB protected socket comprising PVC insulated enclosure with inbuilt plug top and socket, complete with 01 No. SP MCB of 20/25 Amp rating, C curve, suitable for 220–240 Volts AC supply, including making necessary electrical connections, testing and commissioning, complete all as specified and directed. |
| 158 | M&L in repairs Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , GI light grade earth lead protection pipe CI frame and cover, including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed. Please Enable Macros to View BoQ information |
| 159 | M&L in repairs Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , GI light grade earth lead protection pipe CI frame and cover, including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender