Tender For Maintenance / Repair Of Chair And Charpoy Plywood Top Under Bso Of Ge(S) Bathinda At Bathinda Mil Stn
Tender Value
45 Lakhs
Estimated cost
Bid Submission
30 Jul 2026
3 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Maintenance / Repair Of Chair And Charpoy Plywood Top Under Bso Of Ge(S) Bathinda At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Removing old U/S Plywood from Charpoy GI Pipe Plywood Top and S&F new Plywood 12mm thick ( 9 ply) of BWR Grade ISI Maked of Size 1990x910mm with Nut & Bolt as required Rest complete all as specified and directed. (Drg No. FD-220) |
| 2 | Welding of loose joint of flat Iron of charpoy GI pipe plywood top complete all as specified and directed.(Drg No. FD-220) |
| 3 | Tightening of complete frame & welding loose joint of GI pipe with frame of charpoy GI pipe plywood top complete all as specified and directed. (Drg No. FD-220) |
| 4 | M&L for preparation of old surface of flat iron (03 Nos) and painting the same with one coat of synthetic enamelled paint black colour (Ist grade quality) complete all as specified and directed. (Drg No. FD-220) |
| 5 | M&L to repair chair CB steel with arms by replacing the following parts with first class teak wood/approved ones. Rest all as per the drawings and as directed (Drg No FD-75(M) |
| 6 | Seat/back having 30mm thickness and 50mm width of rail (duly caned with approved quality of cane and as per godrej pattern) |
| 7 | S&F new MS cleats of size 25mm x 3mmx60mm long duly welded to frame to support seat. |
| 8 | Handle made out of first class teak wood size 400x50x25mm. |
| 9 | Re-caning seat / back. |
| 10 | S&F PVC shoe of approved quality and suitable size. |
| 11 | M&L to repair chair CB steel without arms by replacing the following parts first class teak wood/approved ones. Rest all as per the drawings and as directed.(Drg No FD-75(M) |
| 12 | Seat/back having 30mm thickness and 50mm width of rail (duly caned with approved quality of cane and as per godrej pattern) |
| 13 | S&F new MS cleats of size 25mm x 3mmx60mm long duly welded to frame to support seat. |
| 14 | Re-caning seat / back. |
| 15 | S&F PVC shoe of approved quality and suitable size. |
| 16 | M&L for preparation of old steel surface of chair verandah and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint white colour (1st Grade Quality) and recaning with 4-5 mm half round 0.6 thick plastic cane made out of virgin plastic, in existing pattern complete.Rest all as specified and directed by engr-in-charge. ( Drg No. FD-359/256/19 ) |
| 17 | Re-caning seat / back. |
| 18 | S&F PVC shoe suitable for chair verandah of approved quality. |
| 19 | M&L for preparation of old steel surface of chair verandah (Newar) and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint white colour (1st Grade Quality) and Reweaving of seat and back with virgin plastic newar of 50 to 55 mm vide closely woven through out complete all as specified and directed by Engr -in - Charge.Rest all as specified and directed by engr-in-charge. ( Drg No.256) Note :- Cost of virgin plastic newar shall not be less than 160/- per kg. |
| 20 | S&F PVC shoe suitable for chair verandah of approved quality. |
| 21 | M&L for preparation of old steel surface of chair verandah (MAP) and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint white colour (1st Grade Quality) and fixing PVC seat and back 4mm thick with wt not less than 1.85 kg and grooves 90x10mm 10 Nos on seat and back of approved quality.Rest all as specified and directed by engr-in-charge. ( Drg No. FD/MAP-II/06) |
| 22 | S & F of flat iron stiffener of size 25mmx5mm thick beneath the seat of chair Verandha (MAP) of suitable length to support to seat of chair Verandah (MAP) duly painted with two coat of synthetic enamel paint white colour (Ist Gde quality) over a coat of Red oxide primer complete all as specified and directed. |
| 23 | S&F PVC shoe suitable for chair verandah of approved quality. |
| 24 | Taking out u/s strips from Chair Verandah Offrs and S & F new strip of size 60mm wide x3mm thickness of appropriate length to chair verandha complete all as specified and directed by Engr -in - Charge. (Drg No.FD/E6/MAP/11) |
| 25 | M&L to repair Chair writing MAP (made out of tapestry cloth) by replacing unserviceable parts as per drawing. Rest all as directed by engr-in-charg (Drg No.FD/E6/MAP/12) |
| 26 | Only tapestry cloth of seat and back complete. |
| 27 | Tapestry cloth and foam of seat/ back complete. |
| 28 | Only Plywood of seat /back. |
| 29 | Note:- sample and shade of materials will be determined as per actual requirement at site.Cost of tapestry cloth shall not be less than 250/-per meter. |
| 30 | M&L repairs to Chair computer/chair revolving (made out of tapestry cloth) by replacing unserviceable parts as per drawings/TP. Rest all as directed by engr-in-charge. (Drg No.FD/E6/MAP/01,TP) |
| 31 | Only tapestry cloth of seat and back complete. |
| 32 | Tapestry cloth and foam of seat/ back complete. |
| 33 | Only Plywood of seat /back. |
| 34 | Hydraulic of suitable size. |
| 35 | Push back plate complete all as specified and directed |
| 36 | Base PVC/Iron of suitable size and pattern. |
| 37 | Wheel of suitable size and pattern. |
| 38 | Arms as requred by size and design. |
| 39 | Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 250/-per meter. |
| 40 | M&L repairs to Chair School with hand board by replacing unserviceable parts as per drawings. Rest all as directed by engr-in-charge. (Drg No.FD/E6/MAP/05) |
| 41 | S&F of new seat and back in single piece of chair shall be of propylene co polymer seat weight 1.20kg moulded to shape and size all as shown on drawing Seat shall be fixed to frame with suitable bolts & nuts as per drawing and as directed by Engineer-in-charge |
| 42 | S&F of new writing board made out of 18mm thick prelaminated exterior grade MDF board OSL,Grade I, Type II,Designation PLMDF-12,one side Classic walnut face and balancing white on other side with 4mmx18mm thick teakwood edging all around fixed with panel pins and adhesive with diamond cut pattern finishing at corners.25mm dia hollow steel pipe inserted in 20mm dia MS rod welded to frame. Rest all as shown on drawing. |
| 43 | Arms made out of 20mm dia MS pipe duly welded frame |
| 44 | S&F PVC shoe 15mm dia of approved quality. |
| 45 | M&L to repairs Chair Easy Cushioned by replacing the following unserviceable parts with first class teak wood/approved ones. Rest all as per drawing & as directed.(DRG NO. FD-358) |
| 46 | Front leg. |
| 47 | Rear leg. |
| 48 | Arm Rest with foam covered with Rexine |
| 49 | Rail of seat frame |
| 50 | Rail of back frame |
| 51 | 75mm thick foam cushion of 40 density duly covered with tapestry cloth matching to seat complete all as specified and directed by the Engineer-in-Charge. |
| 52 | 50mm thick foam cushion of 40 density duly covered with tapestry cloth matching to back complete all as specified and directed by the Engineer-in-Charge. |
| 53 | Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 250/-per meter. |
| 54 | M&L to repairs Chair dining by replacing the following unserviceable parts with first class teak wood/approved ones. Rest all as per drawing & as directed. (DRG NO. FD-1105/279/270/262/228/203) |
| 55 | Front leg. |
| 56 | Rear leg. |
| 57 | Stiffener. |
| 58 | back rest. |
| 59 | rail. |
| 60 | S&F PVC shoe 15mm dia of approved quality. |
| 61 | M&L to repair Chair dining by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane. |
| 62 | M&L to repair Chair dining MAP by replacing the following unserviceable parts with first class teakwood. Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD/MAP-II/05 ) |
| 63 | Front leg. |
| 64 | Rear leg. |
| 65 | Stiffener. |
| 66 | back rest. |
| 67 | Rail. |
| 68 | S&F PVC shoe 15mm dia of approved quality. |
| 69 | PVC Seat 4x10mm thick RIBS moulded alongwith seat in single piece of approved quality. |
| 70 | S&F teakwood stiffener of suitable size 20mmx20mm thick beneath PVC seat to support PVC seat.Rest all as directed by engr-in-charge. |
| 71 | M&L to repair Chair dining cushioned MAP by replacing the following unserviceable parts with first class teakwood/approved ones. Rest all as as per drawings and as directed.(Drg No FD/MAP-II/04,FD/E6/MAP/10(R)) |
| 72 | Front leg. |
| 73 | Rear leg. |
| 74 | Rail. |
| 75 | stiffener. |
| 76 | vertical strip. |
| 77 | only tapestry cloth of seat complete. |
| 78 | Tapestry cloth and foam 75mm (40 D) of seat complete. |
| 79 | Only Plywood 12mm thick (9 ply) BWR gde. |
| 80 | S&F PVC shoe 15mm dia of approved quality. |
| 81 | Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 250/-per meter. |
| 82 | M&L to repair Chair easy by replacing the following unserviceable parts with first class teakwood.Rest all as per drawing and as directed by engr-in-charge. (DRG NO. FD-229/201) |
| 83 | Frame front/back of seat |
| 84 | Frame side of seat. |
| 85 | Frame top/bottom of back. |
| 86 | Frame side of back. |
| 87 | Rail. |
| 88 | S&F PVC shoe 15mm dia of approved quality. |
| 89 | M&L to repair Chair easy by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane. |
| 90 | M&L to repair Chair writing by replacing the following unserviceable parts with first class teak wood. Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD-280/250) |
| 91 | Front leg. |
| 92 | Rear leg. |
| 93 | Stiffener. |
| 94 | Back rest. |
| 95 | Rail. |
| 96 | S&F PVC shoe 15mm dia of approved quality. |
| 97 | M&L to repair Chair writing by replacing old plastic cane with new cane of 2 to 2.5 mm width and 0.4mm thick of approved quality. Border of chair shall be caned with 4mm wide and 0.6mm thick cane. |
| 98 | M&L to repair Stool dressing cushion by replacing the following parts with first class teakwood/approved ones.Rest all as per drawing and as directed by Engineer-in-Charge. (DRG NO. FD/E6/MAP/14) |
| 99 | Rail. |
| 100 | Only tapestry cloth of seat complete. |
| 101 | Tapestry cloth and Cushion75mm(40D) complete. |
| 102 | plywood 12mm thick (9ply) BWR Gde. |
| 103 | Stiffener. |
| 104 | S&F PVC shoe 15mm dia of approved quality. |
| 105 | Note:-cost of tapestry cloth shall not be less than 250/-per meter. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender