Tender For Repair And Maintenance Of Black Top Road At Along Mil Stn.
Tender Overview
Project Description
Tender For Repair And Maintenance Of Black Top Road At Along Mil Stn.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 23-Jul-2026 | Date corrigendum | Date | 03-Aug-2026 |
| 2 | 27-Jul-2026 | Date corrigendum 2 | Date | 08-Aug-2026 |
| 3 | 23-Jul-2026 | Date corrigendum | Date | 03-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Repair to potholes any depth, not exceeding 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc., cutting around edges to at least 25 mm in depth, making good by applying tack coat with cationic bitumen emulsion RS-1 grade at the rate of 5 kg per 10 sqm, putting in premix bituminous macadam, well rammed and sealed ith binder 9.8 Kg per 10 Sqm , blinded ith 0.09 of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm complete all as specified and as directed. |
| 2 | Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete and applying tack coat on existing bituminous, cement concrete with VG 10 bituminus primer at the rate of 5 kg per 10 sqm of surface complete all as specified and as directed.Note:- Tack coat shall be applied with mechanical sprayer only. |
| 3 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exceeding 400 sqm, depth exceeding 50 mm but not exceeding 100 mm complete all as specified and as directed. |
| 4 | M&L for premix bituminous macadam n.exc 75mm thickness using hot mix plant and mechanical paver with 4% binder (Paving bitumen VG 30 grade) content by weight of total mix, laid/rolled and compacted to required gradient and camber using 8 to 10 tonnes power roller completeall as specified and as directed.Note:- The minimum bitumen content shall be 4% of total mix. However, no price adjustment shall be made if bitumen content is more than 4% after design mix. |
| 5 | M & L for semi dense bituminous premix asphaltic dense concrete 40 mm consolidated thickness using graded crushed stone aggregate premixed with binder (paving grade bitumen VG 30 grade) @ 5.5% by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and as directed.Note :- (i) Semi dense bituminous concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper.(ii) The minimum biyumen content is 5.5%of total mix. No price adjustment shall be made if bitumen content is more than 5.5% after design mix.(iii) Rolling shall be done in three stages as per Clause 5.6.2 of IRC 111:2009 using 9 to 10 tone dead weight or vibratory steel wheel roller, penumatic roller of 12 to 15 tone and finally 6 to 8 tone smooth wheel roller. |
| 6 | M&L for preparing biuminious surfaces of road and marking 2.5mm thick centre lines, stops lines, dashes, arrows etc. and the like exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS- 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 7 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 8 | Supply and fix solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm X 125mm X 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4 V/0.3 watt one NI-ed rechargeable battey (1.2V/ 1600MA) consisting of super brigh LED with 10,000 to 18,000 mcd complete as per manufacturers instructions etc. all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysCorrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender