Tender For Repair / Maintenance Of Dg Sets And Eot Cranes Incl Repairs To Ncinerator Under Ge Missamari
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Jul 2026
11 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair / Maintenance Of Dg Sets And Eot Cranes Incl Repairs To Ncinerator Under Ge Missamari
BOQ
| Sl. No. | Item Description |
| 1 | M&L Servicing to DG set of capacity 400 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at JALKENDRA(i) Fuel filter (Primary & Secondary) - 01 Set(ii) Spin –on filter for lubricant - 01 No(iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set(vi) Cleaning of fuel tank - 01 Job(vii) Tapping adjustment and calibration- 01 job(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job |
| 2 | M & L for Servicing to DG set of capacity 320 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at UH-ALH, Sangrilla Hall, 41 R&O KLP, 11Para SF Central AC plant(i) Fuel filter (Primary & Secondary) - 01 Set(ii) Spin –on filter for lubricant - 01 No(iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set(vi) Cleaning of fuel tank - 01 Job(vii) Tapping adjustment and calibration- 01 job(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job |
| 3 | M & L for Servicing to DG set of capacity 200 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at JALKENDRA-02 Nos, UAV GP-II PH & 6679 Maint Flt 41, R&O/LCH(i) Fuel filter (Primary & Secondary) - 01 Set(ii) Spin –on filter for lubricant - 01 No(iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set(vi) Cleaning of fuel tank - 01 Job(vii) Tapping adjustment and calibration- 01 job(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job |
| 4 | M & L for Servicing to DG set of capacity 125 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at REKHAMARI PH & MRO HUB(i) Fuel filter (Primary & Secondary) - 01 Set(ii) Spin –on filter for lubricant - 01 No(iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set(vi) Cleaning of fuel tank - 01 Job(vii) Tapping adjustment and calibration- 01 job(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job |
| 5 | M & L for Servicing to DG set of capacity 100 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at 180 MH(i) Fuel filter (Primary & Secondary) - 01 Set(ii) Spin –on filter for lubricant - 01 No(iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set(vi) Cleaning of fuel tank - 01 Job(vii) Tapping adjustment and calibration- 01 job(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job |
| 6 | M & L for Servicing to DG set of capacity 82.5 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed for Shivaji Nagar Street Light at UAV (CCR) troop & 571 ASC Bn(i) Fuel filter (Primary & Secondary) - 01 Set(ii) Spin –on filter for lubricant - 01 No(iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set(vi) Cleaning of fuel tank - 01 Job(vii) Tapping adjustment and calibration- 01 job(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job |
| 7 | M & L for Servicing to DG set of capacity 62.5 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at Engr Regt (Stn HQ), for Perimeter lights at Rekhamari and Nepali Basti, Buffle range, 667 MI room, SPS-A CHHATAGHAR(i) Fuel filter (Primary & Secondary) - 01 Set(ii) Spin –on filter for lubricant - 01 No(iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set(vi) Cleaning of fuel tank - 01 Job(vii) Tapping adjustment and calibration- 01 job(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job |
| 8 | M & L for Servicing to DG set of capacity 40 KVA to 45KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at 180 MH Oxygen plant, & Signal centre & 206 Avn.(i) Fuel filter (Primary & Secondary) - 01 Set(ii) Spin –on filter for lubricant - 01 No(iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set(vi) Cleaning of fuel tank - 01 Job(vii) Tapping adjustment and calibration- 01 job(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job |
| 9 | M & L for Servicing to DG set of capacity 35 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at UAV Troop (06 Nos), STP Pratap Nagar(i) Fuel filter (Primary & Secondary) - 01 Set(ii) Spin –on filter for lubricant - 01 No(iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set(vi) Cleaning of fuel tank - 01 Job(vii) Tapping adjustment and calibration- 01 job(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job |
| 10 | M & L for Servicing to DG set of capacity 30 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at STP SPS-E 571 ASC & MES IB(i) Fuel filter (Primary & Secondary) - 01 Set(ii) Spin –on filter for lubricant - 01 No(iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set(vi) Cleaning of fuel tank - 01 Job(vii) Tapping adjustment and calibration- 01 job(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job |
| 11 | M & L for Servicing to DG set of capacity 25 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at CCR Sub Stn(i) Fuel filter (Primary & Secondary) - 01 Set(ii) Spin –on filter for lubricant - 01 No(iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set(vi) Cleaning of fuel tank - 01 Job(vii) Tapping adjustment and calibration- 01 job(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job |
| 12 | M & L for Servicing to DG set of capacity 20 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at 58 RPA(i) Fuel filter (Primary & Secondary) - 01 Set(ii) Spin –on filter for lubricant - 01 No(iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set(vi) Cleaning of fuel tank - 01 Job(vii) Tapping adjustment and calibration- 01 job(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job |
| 13 | M & L for Servicing to DG set of capacity 15 KVA with and including replacement of the worn out spares and drain out engine oil from the sump, cleaning with kerosene oil and filling up with new engine oil as manufacturer recommended grade & quality and testing for smooth running at rated speed complete all as manufacturer’s specifications and as directed The following items to be replaced after a period of 250 to 300 hours run of DG set ( parts must be replaced as per sample obtained in credit) installed at 11 Para SF 02 Nos(i) Fuel filter (Primary & Secondary) - 01 Set(ii) Spin –on filter for lubricant - 01 No(iii) Engine oil as per manufacture specifications (iv) coolent as per manufacture specifications (v) Air filter - 01 set(vi) Cleaning of fuel tank - 01 Job(vii) Tapping adjustment and calibration- 01 job(viii) Tighting of all nuts, bolts, screws,and any loose parts of DG Set - 01 Job |
| 14 | M&L Battery leads complete with terminal and lugs (set of three Nos) including removal of existing unserviceable one complete all as directed. |
| 15 | M&L Battery leads complete with terminal and lugs (set of two Nos) including removal of existing unserviceable one complete all as directed. |
| 16 | M&L Fan Belt complete suitable for DG set of capacity 100 to 500 KVA including removal of existing unserviceable one compete all as specified and directed. |
| 17 | M&L Fan Belt complete suitable for DG set of capacity 82.5 to 7.5 KVA including removal of existing unserviceable one compete all as specified and directed. |
| 18 | M&L Radiator Fan Blade complete suitable for capacity 7.5 to 82.5 KVA including removal of existing unserviceable one compete all as specified and directed. |
| 19 | M&L Radiator Fan Blade complete suitable for capacity 100 to 500 KVA including removal of existing unserviceable one compete all as specified and directed. |
| 20 | M&L disconnecting all electrical connections from DG set alternator of any capacity from base plate by opening nuts & bolts keeping aside the alternator for inspection and testing & commissioning complete all as specified & directed. |
| 21 | M&L Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 7.50 KVA to 15.00 KVA DG complete all as specified and directed. |
| 22 | M&L Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 20 KVA to 40 KVA DG complete all as specified and directed. |
| 23 | M&L Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 62.5 KVA to 82.5 KVA DG complete all as specified and directed. |
| 24 | M&L Rewinding of alternator field coil with super enamelled copper winding wire of class 'F' insullation as per existing size and gauge including heating, varnishing and testing of 100 KVA to 125 KVA DG complete all as specified and directed. |
| 25 | M&L Self Starter assembly 24 Volts complete suitable for 100 KVA to 500 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 26 | M&L Self Starter assembly 12 Volts complete suitable for 7.5 KVA to 82.5 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 27 | M&L DC Alternator assembly 24 Volts complete suitable for 100 KVA to 500 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 28 | M&L DC Alternator assembly 12 Volts complete suitable for 7.5 KVA to 82.5 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 29 | M&L Electronic speed control unit assembly suitable for 24Volts battery charger including removal of existing unserviceable one compete all as specified and directed. |
| 30 | M&L SMPS (System main power supply) control unit assembly 24Volts complete suitable 100 KVA to 500 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 31 | M&L SMPS (System main power supply) control unit assembly 12Volts complete suitable 100 KVA to 500 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 32 | M&L AVR (Automatic Voltage regulator) control unit assembly suitable 7.5 KVA to 82.5 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 33 | M&L AVR (Automatic Voltage regulator) control unit assembly suitable 100 KVA to 500 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 34 | M&L Brass battery terminals extended type heavy grade including removal of existing unserviceable one compete all as specified and directed. |
| 35 | M&L SS canopy Stainless steel hinges as per original OEM for acoustic doors with suitable Stainless steel bolts and nuts of DG set including removal of existing unserviceable one compete all as specified and directed. |
| 36 | M&L Radiator hose pipe with suitable clamps of DG set including removal of existing unserviceable one compete all as specified and directed. |
| 37 | M&L solenoid switch assembly 24 volts suitable for 100 KVA to 400 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 38 | M&L solenoid switch assembly 12 volts suitable for 7.5 KVA to 82.5 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 39 | M&L Anti vibration pads with suitable bolts and washers including removal of existing unserviceable one compete all as specified and directed. |
| 40 | M&L Asbestos Rope including removal of existing unserviceable one compete all as specified and directed. |
| 41 | M&L Water pump Assembly suitable for 7.5 KVA to 63 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 42 | M&L Water pump Assembly suitable for 82.5 KVA to 125 KVA DG set removal of existing unserviceable one compete all as specified and directed. |
| 43 | M&L Water pump Assembly suitable for 200 KVA to 500 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 44 | M&L Feed pump suitable for 7.5 KVA to 63 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 45 | M&L Feed pump suitable for 82.5 KVA to 125 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 46 | M&L Electronic Type Starting Switch for 7.5 KVA to 15 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 47 | M&L Electronic Type Starting Switch for 30 KVA to 125 KVA DG set including removal of existing unserviceable one compete all as specified and directed. |
| 48 | M&L taking out unserviceable radiator from existing DG set of capacity 200 KVA to 400 KVA for servicing and cleaning by using chemical solution for removal of scaling/foreign material from water fins (tubes) through authorized dealer including checking and repair/replacement of water circulating pumps, thermostat, radiator cooling fan, all types of belts including soldring of damaged radiator fins and hose pipes for smooth functioning, complete all as specified and as directed. |
| 49 | M&L taking out unserviceable radiator from existing DG set of capacity 62.5 KVA to 125 KVA for servicing and cleaning by using chemical solution for removal of scaling/foreign material from water fins (tubes) through authorized dealer including checking and repair/replacement of water circulating pumps, thermostat, radiator cooling fan, all types of belts including soldring of damaged radiator fins and hose pipes for smooth functioning, complete all as specified and as directed. |
| 50 | M&L taking out unserviceable radiator from existing DG set of capacity 7.5 KVA to 45 KVA for servicing and cleaning by using chemical solution for removal of scaling/foreign material from water fins (tubes) through authorized dealer including checking and repair/replacement of water circulating pumps, thermostat, radiator cooling fan, all types of belts including soldring of damaged radiator fins and hose pipes for smooth functioning, complete all as specified and as directed. |
| 51 | S&F battery low maintenance heavy duty lead acid of capacity 12 volts 150 AH suitable for DG sets including removal of existing unserviceable one compete all as specified and directed. |
| 52 | S&F battery low maintenance heavy duty lead acid of capacity 12 volts 180 AH suitable for DG sets including removal of existing unserviceable one compete all as specified and directed. |
| 53 | S&F battery low maintenance heavy duty lead acid of capacity 12 volts 80 AH suitable for DG sets including removal of existing unserviceable one compete all as specified and directed. |
| 54 | Supply, Fixing and erection of Mild steel canopy Cover for SHIVAJI NAGAR DG set ( 82.5 KVA) as per existing size and profile duly painted with two coats of synthetic enamel paint over red oxide primer compete all as specified and directed. |
| 55 | M&L Low oil pressure switch (LLOP) as per Existing OEM Suitable for upto 200 KVA DG sets capacity compete all as specified and directed. |
| 56 | M&L microprossesor based fully configurated as per Existing OEM controller display panel board Suitable for upto 125 KVA DG sets capacity compete all as specified |
| 57 | M&L Onload change over switch of capacity 63 Amps (Side handle) in sheet metal encloser, 415 V, 50Hz, 4 Pole compete all as specified and directed. |
| 58 | M&L Onload change over switch of capacity 100 Amps (Side handle) in sheet metal encloser, 415 V, 50Hz, 4 Pole compete all as specified and directed. |
| 59 | M&L Onload change over switch of capacity 400 Amps (Side handle) in sheet metal encloser, 415 V, 50Hz, 4 Pole compete all as specified and directed. |
| 60 | M&L Onload change over switch of capacity 630 Amps (Side handle) in sheet metal encloser, 415 V, 50Hz, 4 Pole compete all as specified and directed. |
| 61 | Scraping old paint of any capacity DG set Chessis (Approx coverage area 5-7 Sqm) installed at various locations and Painting with one coats of red oxide paint and two coat of synthetic enamel paint of shade compete all as directed. |
| 62 | M&L taking out all injector (by using right tools means torque wrench ) from DG set 200 KVA to 500 KVA for servicing through authorised dealar and refixing its original position after repairing including replacement of plunger, washer, jets and any internal parts of injector, complete all as specified and as directed. |
| 63 | M&L taking out all injector (by using right tools means torque wrench ) from DG set 62.5 KVA to 125 KVA for servicing through authorised dealar and refixing its original position after repairing including replacement of plunger, washer, jets and any internal parts of injector, complete all as specified and as directed. |
| 64 | M&L taking out all injector (by using right tools means torque wrench ) from DG set 7.5 KVA to 45 KVA for servicing through authorised dealar and refixing its original position after repairing including replacement of plunger, washer, jets and any internal parts of injector, complete all as specified and as directed. |
| 65 | M&L fuel pipe ( benjo pipe) having length 1 feet to 3 feet of suitable size as per OEM including removal of existing unserviceable one compete all as directed. |
| 66 | M&L Hose pipe of suitable size and length as per OEM for 62.5 KVA to 500 KVA including removal of existing unserviceable one compete all as directed. |
| 67 | M&L power contractor with add on accessories for AMF panel of suitable rating and exciting coil voltage 240/ 415 V as per OEM for 7.5 KVA to 45 KVA including removal of existing unserviceable one compete all as directed. |
| 68 | M&L power contractor with add on accessories for AMF panel of suitable rating and exciting coil voltage 240/ 415 V as per OEM for 62.5 KVA to 125 KVA including removal of existing unserviceable one compete all as directed. |
| 69 | M&L power contractor with add on accessories for AMF panel of suitable rating and exciting coil voltage 240/ 415 V as per OEM for 200 KVA to 500 KVA including removal of existing unserviceable one compete all as directed. |
| 70 | Supply only Coolent suitable as per OEM suitable for DG sets compete all as directed. |
| 71 | Supply only Engine OIL suitable as per OEM suitable for DG sets compete all as directed. |
| 72 | M & L for periodic inspection/ servicing/ overhaulling of 10 Ton capacity flame proof EOT crane of any make installed at TP of 4 core OMC, making the cranes in serviceable condition complete all as specified and directed for maintenance specified as under:-(A) LONG TRAVERSE MOTION :-(i) Checking gear box oil level, checking and rectification of leakage if any and filling with new oil up to required level.(ii) Checking functioning of all brakes of any capacity and making adjustment for proper working.(iii) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement.(iv) Checking of grease in geared coupling and tighting of nut/bolts etc.(v) Checking of motion cut off at extreme ends with limit switches.(vi) Checking drive shaft and coupling including tighting of nut and bolts.(vii) Checking oil in FLP thrustors checking any leakage any filling with new oil.(viii) Checking terminal connection of all LT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (B) CROSS TRAVERSE MOTION:-(i) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level.(ii) Checking functioning of all brakes of any capacity and making adjustment for proper working.(iii) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement.(iv) Checking of grease in geared coupling and tighting of nut/bolts etc.(v) Checking of motion cut off at extreme ends with limit switches.(vi) Checking drive shaft and coupling including tighting of nut and bolts.(vii) Checking oil in FLP thrustors checking any leakage any filling with new oil.(viii) Checking terminal connection of all CT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (C) HOIST MOTION (Item Contd.....) Please Enable Macros to View BoQ information |
| 73 | M & L for periodic inspection/ servicing/ overhaulling of 10 Ton capacity flame proof EOT crane of any make installed at TP of 4 core OMC, making the cranes in serviceable condition complete all as specified and directed for maintenance specified as under:-(A) LONG TRAVERSE MOTION :-(i) Checking gear box oil level, checking and rectification of leakage if any and filling with new oil up to required level.(ii) Checking functioning of all brakes of any capacity and making adjustment for proper working.(iii) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement.(iv) Checking of grease in geared coupling and tighting of nut/bolts etc.(v) Checking of motion cut off at extreme ends with limit switches.(vi) Checking drive shaft and coupling including tighting of nut and bolts.(vii) Checking oil in FLP thrustors checking any leakage any filling with new oil.(viii) Checking terminal connection of all LT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (B) CROSS TRAVERSE MOTION:-(i) Checking gear box oil level, checking and rectifiaction of leakage if any and filling with new oil up to required level.(ii) Checking functioning of all brakes of any capacity and making adjustment for proper working.(iii) Checking motion wheel for any abnormal sound & checking mounting/ fixing arrangement.(iv) Checking of grease in geared coupling and tighting of nut/bolts etc.(v) Checking of motion cut off at extreme ends with limit switches.(vi) Checking drive shaft and coupling including tighting of nut and bolts.(vii) Checking oil in FLP thrustors checking any leakage any filling with new oil.(viii) Checking terminal connection of all CT motion of three phase FLP electric motor and tightening properly including repalcing burnt out/ over heated cable ends if any. (C) HOIST MOTION (Item Contd.....) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender