Power Government Departments Closing in 0 days TDR #56401153

Tender For Work Under Business Plan 2026-27 Against Approved Estimate (15 No.) In Edsd 1St Under Edd-Shamli.

Issued by Government Departments · Shamli, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Jul 2026
0 days left
EMD
23000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Shamli → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Work Under Business Plan 2026-27 Against Approved Estimate (15 No.) In Edsd 1St Under Edd-Shamli.- 2 Safe Carriage Of The Following Material From Store Centre To Work Site Including Loading And Unloading At Both Ends As Per Respo Norms (In Juridiction Of Circle) Distance 0 To 60 Km:-11 Mtr. Pcc/St Poles. 3 09 Mtr. Pcc Poles. 4 8.5 Mtr. Long Pcc Poles. 5 Acsr Weasel Conductor. 6 Acsr Dog Conductor. 7 Lt Ab Cable (3×95+1×70+1×16) Sq.Mm 8 Lt Ab Cable (3×120+1×95+1×16) Sq.Mm 9 T/F 11/0.4 Kv, 63 Kva 10 T/F 11/0.4 Kv, 100 Kva 11 T/F 11/0.4 Kv, 250 Kva 12 11 Kv Xlpe Cable Al. 3X70 Sq.Mm 13 11 Kv Xlpe Cable Al. 3X185 Sq.Mm 14 Lt Xlpe Cable Al. 1X120 Sq.Mm 15 Lt Xlpe Cable Al. 1X400 Sq.Mm 16 33/11 K.V Line Material Such As Cross-Arms, Polymeric Pin Insulators With Pin, Guarding Angles, Guarding Wire, Disc Insulators With Fittings, Stay Set, G.I Wire, Earthing Rod, Fuse Set, M.S Angle, M.S Channel, Jointing Sleave For Various Type Conductor Etc. 17 1-Φ & 3 Φ Distribution Box 18 Various Type Cable Jointing Kits (Indoor &Outdoor ), Straight Through For 11/33 Kv. 19 11 Kv Tpmo 20 Dismantling/Removing Of The Line By Contractor And Safe Carriage Of The Material From Work Site To Store Including Loading And Unloading At Both Ends As Per Respo Norms :-Acsr Conductor From All Phases On Line, Making Bundle And Stacking At A Safe Place, 21 M.S Scrape And Other Line Item 22 Old And Used Tf 10/25/63/100 Kva 23 Construction Of 33 Kv/ 11 Kv / Lt Over Head / Underground Line As Per Respo Norms :-Sagging Acsr Weasel Conductor. 24 Sagging Acsr Dog Conductor. 25 Sagging Lt Ab Cable (3×95+1×70+1×16) Sq.Mm 26 Sagging Lt Ab Cable (3×120+1×95+1×16) Sq.Mm 27 Sagging Various Type 11/33 Kv Xlpe Cable Over Head 28 Digging Of Cable Trench In Size Of 0.45Mtr. X1.05 Mtr. And Laying Cable In Trench And Providing 150 Mm. Sand Cushion Beneath And 150 Mm. Above The Cable. The Cable Shall Be Duly Protected By 1St Class Bricks, Two On Either Side And Third On Top Of The Cable, Laid In The Series One After The Other And:-G.I. Pipe 6” Dia For Inserting 33/11 Kv Xlpe Cable For Safety Of Cable On Single/Double Pole By Providing And Fixing Of Ms Clamp, Nuts And Bolts. 29 Laying Of Hdpe Pipe 30 Guarding Of 33/11 Kv Line With G.I. Wire. 31 Fixing Of 11 Kv Fuse Set . 32 Mounting And Fixing Of 25/63/100 Kva Transformer On Double Pole And Making Proper Connections Ht/ Lt Side. 33 Making 2X2X1.5 Mtr Size Plinth For 250 Kva/400Kva Transformer With 1 Class Brick And With All Material And Civil Work As Per Respo Norms. 34 Installation Of 250 Kva/400 Kva Transformer On Plinth Including Making Proper Connections Ht/ Lt Side. 35 Making Ms Strip (50X6 Mm) Fencing (6 Feet Height Including Civil Work) For Humanand Equipment Safty With Interlocking Tile Inside Transformer Fencing. 36 Water Level Earthing Of 250 Kva/400 Kva Transformer For Its Safty With All Accessories. (Earthing Material Should Be Provided By Contractor) 37 Henly Type Tailless Unit Protection Cubical Panel 500A, 650V For 160/250 Kva Transformer. (Tail Less Unit Should Be Provided By Contractor) 38 Fixing Of Lt Fuse Set/Box With Fuse Wire And Fixing Of Ms Clamp, Nuts And Bolts And Making Proper Connections With All Accessories. 39 Mounting And Fixing 11 K.V Stay Set 40 Mounting And Fixing 33 K.V Stay Set 41 Mounting And Fixing 11 K.V Pin/Disk Insulator With Fitting. 42 Mounting And Fixing 33 K.V Pin/Disk Insulator With Fitting. 43 Fixing Of Danger Board And Number Plate With Clamp . 44 Wraping Of Barbed Wire On Pole. 45 Fixing Of 1-Φ & 3 Φ Distribution Box With Making Proper Connection 46 Earthing Of Pcc/St Pole/ Transformer By M.S Earthing Rod 47 For 33/11 Kv/Lt Line, Excavation Of Foundation Pit In Size Of 75X45 Cm. Having Depth Of 1/6Th Of The Full Length Of The Support (Pole), Providing And Laying Of Stone Pad (300X300X75Mm.) In The Bottom Of The Pit. (For Pcc Pole) Erection Of Single Pole Support Complete With Fixing Of 11 Kv V-Type Cross-Arms, Holding Clamps, F-Bracket And Nuts & Bolts And All Other Accessories , . Single Support 8.5 Mtr. Long Pcc Poles :- 48 9 Mtr. Long Pcc Poles :- 49 11 Mtr. Long Pcc Poles :- 50 For 33/11 Kv/Lt Line, Excavation Of Foundation Pit In Size Of 75X45 Cm. Having Depth Of 1/6Th Of The Full Length Of The Support (Pole), Providing And Laying Of Stone Pad (300X300X75Mm.) In The Bottom Of The Pit. (For Pcc Pole) Erection Of Single Pole Support Complete With Fixing Of 11 Kv V-Type Cross-Arms, Holding Clamps, F-Bracket And Nuts & Bolts And All Other Accessories , . Double Support Double/Section Pole Structure With 8.5 Mtr. Long Pcc Poles :- 51 9 Mtr. Long Pcc Poles :- 52 11 Mtr. Long Pcc Poles :- 53 Installation Of M.S Angle/ Channel/ Bracing On Existing Double Pole Structure 54 For 33/11 Kv/Lt Line, Excavation Of Foundation Pit In Size Of 75X45 Cm. Having Depth Of 1/6Th Of The Full Length Of The Support (Pole), Providing And Laying Of Stone Pad (300X300X75Mm.) In The Bottom Of The Pit. (For Pcc Pole) Erection Of Single Pole Support Complete With Fixing Of 11 Kv V-Type Cross-Arms, Holding Clamps, F-Bracket And Nuts & Bolts And All Other Accessories , . Tri Support 11 Mtr. Long Pcc Poles :- 55 For 33/11 Kv/Lt Line, Excavation Of Foundation Pit In Size Of 75X45 Cm. Having Depth Of 1/6Th Of The Full Length Of The Support (Pole), Providing And Laying Of Stone Pad (300X300X75Mm.) In The Bottom Of The Pit. (For Pcc Pole) Erection Of Single Pole Support Complete With Fixing Of 11 Kv V-Type Cross-Arms, Holding Clamps, F-Bracket And Nuts & Bolts And All Other Accessories , . Four Pole 9 Mtr. Long Pcc Poles :- :- 56 Grounting Of Pcc/St Pole 57 Grouting Of Stay Rods (20X1800Mm.) Including All Works Of Excavation, Cement Concrete In Size Of (0.60X0.60X0.30)M In The Ratio Of 1:4:6 (Cement, Sand And 40 Mm. Brick Ballast) Including Back Filling Of Soil And Proper Ramming Etc. 58 Filling Of Various Type 33/11 Kv Cable Jointing Kit. 59 Installtion Of 11 Kv Tpmo 60 Matarials To Be Provided By Contractor Of 11 Kv Underground/ Over Head Line As Per Respo Norms :-Stone Pad 300X300X75 Mm 61 Cross Arm Holding Clamps With Bolts & Nuts 62 Holding Clamps For Top Channel Tpmo & Fuse Set Etc. With Bolts & Nuts 63 Al. Pg Clamps Dog To Dog 64 Pg Clamp For Lt 65 Suspension Clamp 66 Dead-End Clamp 67 Eye-Hook 68 J-Hook 69 Copper L-Piece 50X225X10 Mm 70 Copper L-Piece 62X225X12 Mm 71 F-Bracket For 11 Kv Line 72 F-Bracket For 33 Kv Line 73 Barbed Wire Gi 74 Lt Pvc Cable 3.5X70/35 Sq Mm 75 Lt Pvc Cable 3.5X150/70 Sq Mm 76 Al. Long Leg Barrel, Off-Size 77 Danger Board With Clamps 78 Number Plate With Clamps 79 Henly Type Tailless Unit Protection Cubical Panel 500A, 650V For 250 Kva And 400 Kva Transformer. 80 Lt Fuse Set With All Accecesories 81 Piercing Connector 82 Double Pole Clamp 83 Guarding Clamp 84 M.S Guarding X-Arm 85 Eye-Bolt 86 Nut And Bolts 87 M.S Channel Top 88 M.S Channel Dropper 89 M.S Angle For Tf Base 90 M.S Bracing Angle 91 M.S Channel T-Off 92 Grounting Of Pole (Grounting Material) 93 Connecting Lead 1X16 Sq Mm

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 15-Jul-2026 date extend Date 16-Jul-2026

BOQ

Name of Work:- fo|qr forj.k [k.M&kkeyh ds vUrxZr fo|qr forj.k mi[k.M&izFke ds dk;Z {ks= esa fctusl Iyku ds vUrZxr Lohd`r izkadYyu ds lkis{k 2026&27 gsrq okg; ,tsUlh ls lEcfU/kr dk;Z djk;s tkus ds lEcU/k esaA
Sl. No. Item Description
1dk;ZA
2Safe carriage of the following material from store centre to work site including loading and unloading at both ends as per RESPO norms (in juridiction of circle) Distance 0 to 60 km:-11 Mtr. PCC/ST Poles.
309 Mtr. PCC Poles.
48.5 Mtr. Long PCC Poles.
5ACSR Weasel Conductor.
6ACSR Dog Conductor.
7LT AB Cable (3×95+1×70+1×16) sq.mm
8LT AB Cable (3×120+1×95+1×16) sq.mm
9T/F 11/0.4 kV, 63 kVA
10T/F 11/0.4 kV, 100 kVA
11T/F 11/0.4 kV, 250 kVA
1211 KV XLPE Cable AL. 3x70 sq.mm
1311 KV XLPE Cable AL. 3x185 sq.mm
14LT XLPE Cable AL. 1x120 sq.mm
15LT XLPE Cable AL. 1x400 sq.mm
1633/11 K.V Line material such as Cross-Arms, Polymeric Pin Insulators with pin, Guarding Angles, Guarding Wire, Disc Insulators with fittings, stay set, G.I wire, Earthing rod, Fuse set, M.s angle, M.s channel, jointing sleave for various type conductor etc.
171-ϕ & 3 ϕ distribution box
18Various Type Cable Jointing Kits (Indoor &outdoor ), straight through for 11/33 KV.
1911 KV TPMO
20Dismantling/removing of the line by contractor and Safe carriage of the material from work Site to store including loading and unloading at both ends as per RESPO norms :-ACSR conductor from all phases on line, making bundle and stacking at a safe place,
21M.S Scrape and other line item
22Old and used TF 10/25/63/100 KVA
23Construction of 33 KV/ 11 KV / LT Over head / Underground Line as per RESPO norms :-Sagging ACSR Weasel Conductor.
24Sagging ACSR Dog Conductor.
25Sagging LT AB Cable (3×95+1×70+1×16) sq.mm
26Sagging LT AB Cable (3×120+1×95+1×16) sq.mm
27Sagging Various type 11/33 KV XLPE Cable over head
28Digging of cable trench in size of 0.45Mtr. x1.05 Mtr. and Laying cable in trench and Providing 150 mm. sand cushion beneath and 150 mm. above the cable. The cable shall be duly protected by 1st Class Bricks, two on either side and third on top of the cable, laid in the series one after the other and:-G.I. Pipe 6” dia for inserting 33/11 KV XLPE cable for safety of cable on Single/Double Pole by providing and fixing of MS Clamp, Nuts and Bolts.
29Laying of HDPE pipe
30Guarding of 33/11 KV Line with G.I. wire.
31Fixing of 11 KV Fuse Set .
32Mounting and fixing of 25/63/100 KVA transformer on double pole and making proper connections HT/ LT side.
33Making 2x2x1.5 mtr size Plinth for 250 KVA/400KVA transformer with 1 class brick and with all material and civil work as per respo norms.
34Installation of 250 KVA/400 KVA transformer on plinth including making proper connections HT/ LT side.
35Making MS strip (50x6 mm) Fencing (6 feet height including civil work) for humanand equipment safty with interlocking tile inside transformer fencing.
36Water level earthing of 250 KVA/400 KVA transformer for its safty with all accessories. (Earthing material should be provided by contractor)
37Henly Type Tailless unit protection cubical panel 500A, 650V for 160/250 KVA Transformer. (Tail less unit should be provided by contractor)
38Fixing of LT Fuse Set/Box with fuse wire and fixing of MS Clamp, Nuts and Bolts and making proper connections with all accessories.
39Mounting and fixing 11 K.V Stay Set
40Mounting and fixing 33 K.V Stay Set
41Mounting and fixing 11 K.V Pin/Disk insulator with fitting.
42Mounting and fixing 33 K.V Pin/Disk insulator with fitting.
43Fixing of Danger board and number plate with clamp .
44Wraping of Barbed wire on Pole.
45Fixing of 1-ϕ & 3 ϕ distribution box with making proper connection
46Earthing of PCC/ST Pole/ Transformer by M.S Earthing rod
47For 33/11 KV/LT Line, Excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support (pole), providing and laying of stone pad (300x300x75mm.) in the bottom of the pit. (For PCC Pole) Erection of single pole support complete with fixing of 11 KV V-Type cross-arms, holding clamps, f-bracket and nuts & bolts and all other accessories , . Single support 8.5 Mtr. long PCC Poles :-
489 Mtr. long PCC Poles :-
4911 Mtr. long PCC Poles :-
50For 33/11 KV/LT Line, Excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support (pole), providing and laying of stone pad (300x300x75mm.) in the bottom of the pit. (For PCC Pole) Erection of single pole support complete with fixing of 11 KV V-Type cross-arms, holding clamps, f-bracket and nuts & bolts and all other accessories , . Double support Double/section Pole structure with 8.5 Mtr. long PCC Poles :-
519 Mtr. long PCC Poles :-
5211 Mtr. long PCC Poles :-
53Installation of M.S Angle/ Channel/ Bracing on Existing Double pole Structure
54For 33/11 KV/LT Line, Excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support (pole), providing and laying of stone pad (300x300x75mm.) in the bottom of the pit. (For PCC Pole) Erection of single pole support complete with fixing of 11 KV V-Type cross-arms, holding clamps, f-bracket and nuts & bolts and all other accessories , . Tri support 11 Mtr. long PCC Poles :-
55For 33/11 KV/LT Line, Excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support (pole), providing and laying of stone pad (300x300x75mm.) in the bottom of the pit. (For PCC Pole) Erection of single pole support complete with fixing of 11 KV V-Type cross-arms, holding clamps, f-bracket and nuts & bolts and all other accessories , . four pole 9 Mtr. long PCC Poles :- :-
56Grounting of Pcc/ST POLE
57Grouting of stay rods (20x1800mm.) including all works of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:6 (cement, sand and 40 mm. brick ballast) including back filling of soil and proper ramming etc.
58Filling of various type 33/11 kv cable jointing kit.
59Installtion of 11 kv TPMO
60Matarials to be provided by contractor of 11 KV Underground/ Over head Line as per RESPO norms :-Stone Pad 300x300x75 mm
61Cross Arm holding Clamps with bolts & nuts
62Holding clamps for top channel TPMO & fuse set etc. with bolts & nuts
63Al. PG clamps Dog to Dog
64PG Clamp For LT
65Suspension Clamp
66Dead-End Clamp
67Eye-Hook
68J-Hook
69Copper L-Piece 50x225x10 mm
70Copper L-Piece 62x225x12 mm
71F-bracket for 11 kV line
72F-bracket for 33 kV line
73Barbed wire GI
74LT PVC Cable 3.5x70/35 sq mm
75LT PVC Cable 3.5x150/70 sq mm
76Al. long leg Barrel, off-size
77Danger Board with clamps
78Number Plate with clamps
79Henly Type Tailless unit protection cubical panel 500A, 650V for 250 KVA and 400 KVA Transformer.
80LT Fuse set with all accecesories
81Piercing connector
82Double pole clamp
83Guarding clamp
84M.S Guarding X-Arm
85Eye-Bolt
86Nut and bolts
87M.S Channel Top
88M.S Channel Dropper
89M.S Angle For TF Base
90M.S Bracing Angle
91M.S channel T-Off
92Grounting Of Pole (Grounting Material)
93Connecting Lead 1x16 sq mm
94Alluminium binding wire
95G.I. Pipe 6” dia
96HDPE PIPE 120mm Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56401153
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 16-07-2026
Authority
Authority Name Paschimanchal Vidyut Vitran Nigam Limited
Work Description Tender For Work Under Business Plan 2026-27 Against Approved Estimate (15 No.) In Edsd 1St Under Edd-Shamli.- 2 Safe Carriage Of The Following Material From Store Centre To Work Site Including Loading And Unloading At Both Ends As Per Respo Norms (In Juridiction Of Circle) Distance 0 To 60 Km:-11 Mtr. Pcc/St Poles. 3 09 Mtr. Pcc Poles. 4 8.5 Mtr. Long Pcc Poles. 5 Acsr Weasel Conductor. 6 Acsr Dog Conductor. 7 Lt Ab Cable (3×95+1×70+1×16) Sq.Mm 8 Lt Ab Cable (3×120+1×95+1×16) Sq.Mm 9 T/F 11/0.4 Kv, 63 Kva 10 T/F 11/0.4 Kv, 100 Kva 11 T/F 11/0.4 Kv, 250 Kva 12 11 Kv Xlpe Cable Al. 3X70 Sq.Mm 13 11 Kv Xlpe Cable Al. 3X185 Sq.Mm 14 Lt Xlpe Cable Al. 1X120 Sq.Mm 15 Lt Xlpe Cable Al. 1X400 Sq.Mm 16 33/11 K.V Line Material Such As Cross-Arms, Polymeric Pin Insulators With Pin, Guarding Angles, Guarding Wire, Disc Insulators With Fittings, Stay Set, G.I Wire, Earthing Rod, Fuse Set, M.S Angle, M.S Channel, Jointing Sleave For Various Type Conductor Etc. 17 1-Φ & 3 Φ Distribution Box 18 Various Type Cable Jointing Kits (Indoor &Outdoor ), Straight Through For 11/33 Kv. 19 11 Kv Tpmo 20 Dismantling/Removing Of The Line By Contractor And Safe Carriage Of The Material From Work Site To Store Including Loading And Unloading At Both Ends As Per Respo Norms :-Acsr Conductor From All Phases On Line, Making Bundle And Stacking At A Safe Place, 21 M.S Scrape And Other Line Item 22 Old And Used Tf 10/25/63/100 Kva 23 Construction Of 33 Kv/ 11 Kv / Lt Over Head / Underground Line As Per Respo Norms :-Sagging Acsr Weasel Conductor. 24 Sagging Acsr Dog Conductor. 25 Sagging Lt Ab Cable (3×95+1×70+1×16) Sq.Mm 26 Sagging Lt Ab Cable (3×120+1×95+1×16) Sq.Mm 27 Sagging Various Type 11/33 Kv Xlpe Cable Over Head 28 Digging Of Cable Trench In Size Of 0.45Mtr. X1.05 Mtr. And Laying Cable In Trench And Providing 150 Mm. Sand Cushion Beneath And 150 Mm. Above The Cable. The Cable Shall Be Duly Protected By 1St Class Bricks, Two On Either Side And Third On Top Of The Cable, Laid In The Series One After The Other And:-G.I. Pipe 6” Dia For Inserting 33/11 Kv Xlpe Cable For Safety Of Cable On Single/Double Pole By Providing And Fixing Of Ms Clamp, Nuts And Bolts. 29 Laying Of Hdpe Pipe 30 Guarding Of 33/11 Kv Line With G.I. Wire. 31 Fixing Of 11 Kv Fuse Set . 32 Mounting And Fixing Of 25/63/100 Kva Transformer On Double Pole And Making Proper Connections Ht/ Lt Side. 33 Making 2X2X1.5 Mtr Size Plinth For 250 Kva/400Kva Transformer With 1 Class Brick And With All Material And Civil Work As Per Respo Norms. 34 Installation Of 250 Kva/400 Kva Transformer On Plinth Including Making Proper Connections Ht/ Lt Side. 35 Making Ms Strip (50X6 Mm) Fencing (6 Feet Height Including Civil Work) For Humanand Equipment Safty With Interlocking Tile Inside Transformer Fencing. 36 Water Level Earthing Of 250 Kva/400 Kva Transformer For Its Safty With All Accessories. (Earthing Material Should Be Provided By Contractor) 37 Henly Type Tailless Unit Protection Cubical Panel 500A, 650V For 160/250 Kva Transformer. (Tail Less Unit Should Be Provided By Contractor) 38 Fixing Of Lt Fuse Set/Box With Fuse Wire And Fixing Of Ms Clamp, Nuts And Bolts And Making Proper Connections With All Accessories. 39 Mounting And Fixing 11 K.V Stay Set 40 Mounting And Fixing 33 K.V Stay Set 41 Mounting And Fixing 11 K.V Pin/Disk Insulator With Fitting. 42 Mounting And Fixing 33 K.V Pin/Disk Insulator With Fitting. 43 Fixing Of Danger Board And Number Plate With Clamp . 44 Wraping Of Barbed Wire On Pole. 45 Fixing Of 1-Φ & 3 Φ Distribution Box With Making Proper Connection 46 Earthing Of Pcc/St Pole/ Transformer By M.S Earthing Rod 47 For 33/11 Kv/Lt Line, Excavation Of Foundation Pit In Size Of 75X45 Cm. Having Depth Of 1/6Th Of The Full Length Of The Support (Pole), Providing And Laying Of Stone Pad (300X300X75Mm.) In The Bottom Of The Pit. (For Pcc Pole) Erection Of Single Pole Support Complete With Fixing Of 11 Kv V-Type Cross-Arms, Holding Clamps, F-Bracket And Nuts & Bolts And All Other Accessories , . Single Support 8.5 Mtr. Long Pcc Poles :- 48 9 Mtr. Long Pcc Poles :- 49 11 Mtr. Long Pcc Poles :- 50 For 33/11 Kv/Lt Line, Excavation Of Foundation Pit In Size Of 75X45 Cm. Having Depth Of 1/6Th Of The Full Length Of The Support (Pole), Providing And Laying Of Stone Pad (300X300X75Mm.) In The Bottom Of The Pit. (For Pcc Pole) Erection Of Single Pole Support Complete With Fixing Of 11 Kv V-Type Cross-Arms, Holding Clamps, F-Bracket And Nuts & Bolts And All Other Accessories , . Double Support Double/Section Pole Structure With 8.5 Mtr. Long Pcc Poles :- 51 9 Mtr. Long Pcc Poles :- 52 11 Mtr. Long Pcc Poles :- 53 Installation Of M.S Angle/ Channel/ Bracing On Existing Double Pole Structure 54 For 33/11 Kv/Lt Line, Excavation Of Foundation Pit In Size Of 75X45 Cm. Having Depth Of 1/6Th Of The Full Length Of The Support (Pole), Providing And Laying Of Stone Pad (300X300X75Mm.) In The Bottom Of The Pit. (For Pcc Pole) Erection Of Single Pole Support Complete With Fixing Of 11 Kv V-Type Cross-Arms, Holding Clamps, F-Bracket And Nuts & Bolts And All Other Accessories , . Tri Support 11 Mtr. Long Pcc Poles :- 55 For 33/11 Kv/Lt Line, Excavation Of Foundation Pit In Size Of 75X45 Cm. Having Depth Of 1/6Th Of The Full Length Of The Support (Pole), Providing And Laying Of Stone Pad (300X300X75Mm.) In The Bottom Of The Pit. (For Pcc Pole) Erection Of Single Pole Support Complete With Fixing Of 11 Kv V-Type Cross-Arms, Holding Clamps, F-Bracket And Nuts & Bolts And All Other Accessories , . Four Pole 9 Mtr. Long Pcc Poles :- :- 56 Grounting Of Pcc/St Pole 57 Grouting Of Stay Rods (20X1800Mm.) Including All Works Of Excavation, Cement Concrete In Size Of (0.60X0.60X0.30)M In The Ratio Of 1:4:6 (Cement, Sand And 40 Mm. Brick Ballast) Including Back Filling Of Soil And Proper Ramming Etc. 58 Filling Of Various Type 33/11 Kv Cable Jointing Kit. 59 Installtion Of 11 Kv Tpmo 60 Matarials To Be Provided By Contractor Of 11 Kv Underground/ Over Head Line As Per Respo Norms :-Stone Pad 300X300X75 Mm 61 Cross Arm Holding Clamps With Bolts & Nuts 62 Holding Clamps For Top Channel Tpmo & Fuse Set Etc. With Bolts & Nuts 63 Al. Pg Clamps Dog To Dog 64 Pg Clamp For Lt 65 Suspension Clamp 66 Dead-End Clamp 67 Eye-Hook 68 J-Hook 69 Copper L-Piece 50X225X10 Mm 70 Copper L-Piece 62X225X12 Mm 71 F-Bracket For 11 Kv Line 72 F-Bracket For 33 Kv Line 73 Barbed Wire Gi 74 Lt Pvc Cable 3.5X70/35 Sq Mm 75 Lt Pvc Cable 3.5X150/70 Sq Mm 76 Al. Long Leg Barrel, Off-Size 77 Danger Board With Clamps 78 Number Plate With Clamps 79 Henly Type Tailless Unit Protection Cubical Panel 500A, 650V For 250 Kva And 400 Kva Transformer. 80 Lt Fuse Set With All Accecesories 81 Piercing Connector 82 Double Pole Clamp 83 Guarding Clamp 84 M.S Guarding X-Arm 85 Eye-Bolt 86 Nut And Bolts 87 M.S Channel Top 88 M.S Channel Dropper 89 M.S Angle For Tf Base 90 M.S Bracing Angle 91 M.S Channel T-Off 92 Grounting Of Pole (Grounting Material) 93 Connecting Lead 1X16 Sq Mm
Basic Detail
Tender No E-TENDER NO-52/2026-27
Bidding Type Tender
Location
City Shamli
State Uttar Pradesh
Key Dates
Publish Date 15 Jul 2026
Submission Date 16 Jul 2026
Open Date 16 Jul 2026
Finance
Tender Value Ref. Documents
Tender Fee 3540
EMD 23000
Exemption Not Available
Document List
BOQ_2190727.xls
e6c20481-e2cc-45bf-963d-e0511188d61e.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 15, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 16, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Today
Jul 16, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Jul 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Today

Tender Documents

Download All (ZIP) ↓
xls

BOQ_2190727.xls

html

e6c20481-e2cc-45bf-963d-e0511188d61e.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders