Tender For Provn Of Compound Wall Near Sanjeev Chowk And Certain Other Sanctioned Work At Faridkot Mil Stn
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Aug 2026
5 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridkot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Compound Wall Near Sanjeev Chowk And Certain Other Sanctioned Work At Faridkot Mil Stn
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed |
| 2 | Excavating in post holes in soft/loose soil (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed |
| 3 | M&L for PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed |
| 4 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation & mass concrete etc complete all as specified. |
| 5 | M&L for PCC 1:2:4 Type B-2 (using 40 mm graded granite stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed |
| 6 | M&L for old size brickwork with fly ash bricks straight or curved on plan exc 6m mean radius wall built in cement mortar 1:6 complete all as specified and directed |
| 7 | M&L for RCC M-30 (20mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 8 | M&L for RCC M-30 (using 20mm graded aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed |
| 9 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surfaces of concrete complete all as specified and directed |
| 10 | S&F MS TMT Bars of 10 mm dia and over, cut to length, bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securining with clip complete all as specified and directed. |
| 11 | S&F MS TMT Bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securining with clip complete all as specified and directed. |
| 12 | M&L for Rendering 15 mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 13 | M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in coping, bed blocks and similar works including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed. |
| 14 | M&L for new plastered surfaces of wall by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying two coat of weather proof acrylic exterior over one coat of exterior primer over one coat of wall care putty using hand roller complete all as specified |
| 15 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed |
| 16 | Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed |
| 17 | S&F Glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM 1:4 on other than fair face of brick work complete all as specified and directed. (Highlighter shall be provided as directed by Engr-in-Charge) |
| 18 | Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290 (Gde E 165) complete all as specified and directed |
| 19 | M&L for preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 20 | M&L for Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum. per sqm complete all as specified and directed |
| 21 | M&L for Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified and directed |
| 22 | M&L for Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30cm up to1.5m in depth, exceeding 1.5m in width as well as 10 sqm on plan), including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 mtr complete all as specified and directed. |
| 23 | M&L for Rolling and consolidating formation surfaces in cutting with 8 to 12 tonne roller in soft/loose soil complete all as specified. |
| 24 | M&L for 150mm spread thickness soling (or sub base) with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified. |
| 25 | M&L for 75 mm PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregates as in sub base flooring complete all as specified. |
| 26 | M&L for 100 mm PCC (1:4:8) type D-2 using 40 mm graded crushed stone aggregates as in sub base flooring complete all as specified. |
| 27 | M&L for 100 mm PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregates as in sub base flooring complete all as specified. |
| 28 | M&L for 150 mm thick Pavement Quality Concrete (PQC) of minimum field flexural strength 40 Kg/Sq cm(lower control limit-LCL) after 28 days in pavement slab using 400 kg of cement per cum and using non circular fibre synthetic reinforcement @ 0.25% by weight of cement with crushed stone aggregate of grading as specified laid in panels, including necessary formwork, spread and compacted using mechanical paver, mechanically vibrated & bull nosing/rounding off edges, curing, broom finishing on top, belting, etc complete all as specified and directed |
| 29 | M&L for Finishing top concrete pavement by brooming with wire brush complete all as specified and directed by Engr-in-charge. |
| 30 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound of Grade \\"A\\" complete all as specified and directed by Engr-in-Charge. |
| 31 | M&L for Forming 20 mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ and also provided with 20 mm dia mild steel dowel bars 50cm long (25cm in each slab) with ferrules, spaced at 300 mm centres, including boring form work and preformed filler for dowels complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L for Forming embankments including raising (or lowering) earth, spreading in layers n.exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n.exc. 1.5 m high from base complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L for Roof trusses (framed), tubular vertical post, fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections, tubular pole) including distance pieces, cleats etc. complete all as specified and directed |
| 34 | S&F Rolled Mild steel Plates (plain or Chequered) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe 410-O or Fe 310-O complete all as specified and directed |
| 35 | S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet (ISI Marked) 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screw all as specified and directed. |
| 36 | M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint over a prime coat complete all as specified and directed by Engr -in-Charge. |
| 37 | Surface Excavation, not exceeding 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed by Engr-in-Charge. |
| 38 | M&L for Sand cushion (25 mm thick) filling under floors or in foundation including watering and consolidated complete all as specified and directed. |
| 39 | S&F rubber moulded pressed precast cement concrete interlocking paver blocks any shape and size conforming to IS-15658 -2006 of 80 mm thick M-35 grade with grey cement and pigment complete all as specified and directed. |
| 40 | M&L for broken stone or boulder hardcore of gauge n.exc 63mm deposited spread and levelled in layer n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed. |
| 41 | S&F Precast kerb stones (factory made) in PCC 1:2:4 type B-1 incl chamfers, weatherings, throatings etc in smooth finish & set in cement mortar 1:4 on sides of roads including necessary excavation embedding blocks in the ground to depth complete all as specified and directed . |
| 42 | M&L for preparation of newly surfaces of concrete and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 43 | Demolition of RCC of any description such chajja, shelves etc and in any position not otherwise specially provided for complete all as specified and directed by Engineer-in-Charge (reinforcement cut as required to facilitate demolition) |
| 44 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed |
| 45 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 46 | M&L for flush pointing to brick wall 15 mm thick in cement mortar 1:4 on surface other than fair face of brickwork or stone masonry surfaces or on one side of lathing, complete all as specified and directed by Engr-in-Charge. |
| 47 | M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all as specified |
| 48 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysAug 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender