Tender For Repair/ Renewal Of Ci Pipe Line With Di Pipe Line And Certain Misc Work Age B/R-Ii Area Under Ge Gwalior
Tender Value
45 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
22 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Renewal Of Ci Pipe Line With Di Pipe Line And Certain Misc Work Age B/R-Ii Area Under Ge Gwalior
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: HQ CWE Jhansi Name of Work: REPAIR/ RENEWAL OF CI PIPE LINE WITH DI PIPE LINE AND CERTAIN MISC WORK AGE B/R-II AREA UNDER GE GWALIOR Contract No: CA NO CWE/JHA/GWL/TOKEN/49 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking up Cast iron water main (including all fittings) with spigot and socketed ends and lead joints including burning out lead joints for pipe of bore 200 mm complete all as specified & directed. |
| 3 | Taking up Cast iron water main (including all fittings) with spigot and socketed ends and lead joints including burning out lead joints for pipe of bore 150 mm complete all as specified & directed. |
| 4 | Taking up Cast iron water main (including all fittings) with spigot and socketed ends and lead joints including burning out lead joints for pipe of bore 100 mm complete all as specified & directed. |
| 5 | Supply laying, connecting, jointing and testing ductile iron pressure pipe ISI maked to IS-8329-2000 (Reaffirmed - 2005 Edition 4.1) of 200 mm dia, with spigot and socket ends, for water supply class K-9 with cement mortar lining inside the metallic zinc coating with finishing layer of bituminous paint on outside the pipe without polyethylene sleeves but including \\"Tyton Joint\\" supplied with ISI marked rubber or fiber board gasket conforming to IS-5382-1982 (Reaffimed-2003) with dual hardness of type-2 (bulb) and type-5 (Heel) quality laid in trenches complete all as specified and directed. Note:- Earth work and DI specified / fittings of the pipe shall be measured and paid separately under appropriate item. |
| 6 | Supply laying, connecting, jointing and testing ductile iron pressure pipe ISI maked to IS-8329-2000 (Reaffirmed - 2005 Edition 4.1) of 150 mm dia, with spigot and socket ends, for water supply class K-9 with cement mortar lining inside the metallic zinc coating with finishing layer of bituminous paint on outside the pipe without polyethylene sleeves but including \\"Tyton Joint\\" supplied with ISI marked rubber or fiber board gasket conforming to IS-5382-1982 (Reaffimed-2003) with dual hardness of type-2 (bulb) and type-5 (Heel) quality laid in trenches complete all as specified and directed. Note:- Earth work and DI specified / fittings of the pipe shall be measured and paid separately under appropriate item. |
| 7 | Supply laying, connecting, jointing and testing ductile iron pressure pipe ISI maked to IS-8329-2000 (Reaffirmed - 2005 Edition 4.1) of 100 mm dia, with spigot and socket ends, for water supply class K-9 with cement mortar lining inside the metallic zinc coating with finishing layer of bituminous paint on outside the pipe without polyethylene sleeves but including \\"Tyton Joint\\" supplied with ISI marked rubber or fiber board gasket conforming to IS-5382-1982 (Reaffimed-2003) with dual hardness of type-2 (bulb) and type-5 (Heel) quality laid in trenches complete all as specified and directed. Note:- Earth work and DI specified / fittings of the pipe shall be measured and paid separately under appropriate item. |
| 8 | M&L, for DI fittings such as bends (any type, radius and angle) Tapers any type (Straight bends, increasing, decreasing or double socket/flanged etc) Tee pieces, single branch 'Y' junction,double branch, cross (all sockets or sockets & spigot/ all flanged etc) collars, Caps & plugs for spigot socketed/Flanged pipes upto 200 mm dia bore |
| 9 | M&L for jointing of ductile iron pipe and pipe fittings any class with rubber gasket joint for spigot and socket end pipe 200 mm dia all as specified and directed. |
| 10 | M&L for jointing of ductile iron pipe and pipe fittings any class with rubber gasket joint for spigot and socket end pipe 150 mm dia all as specified and directed. |
| 11 | Excavating in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out for laying of pipe etc in soft/loose soil. |
| 12 | Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25cm in in soft/loose soil. |
| 13 | Removing excavated surplus in soft/loose soil to a distance not exceeding 50M and depositing where directed and at a level not exceeding 1.5M above the starting point. |
| 14 | Material & Labour for cutting of Roads/PCC/RCC floors depth upto 450mm and filling of PCC 1: 2: 4 type B2, using 40mm graded crushed trap stone aggregate for making good road cutting including removal of surplus joint from site complete all as specified and directed. |
| 15 | M & L For Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 16 | Taking out old unserviceable / GI pipe line alongwith fittings from existing connections of size 80 mm dia complete all as specified and directed. |
| 17 | Taking out old unserviceable / GI pipe line alongwith fittings from existing connections of size 50 mm dia complete all as specified and directed. |
| 18 | Taking out old unserviceable / GI pipe line alongwith fittings from existing connections of size 40 mm dia complete all as specified and directed. |
| 19 | Taking out old unserviceable / GI pipe line alongwith fittings from existing connections of size 25 mm dia complete all as specified and directed. |
| 20 | Taking out old unserviceable / GI pipe line alongwith fittings from existing connections of size 20 mm dia complete all as specified and directed. |
| 21 | Supply & Laying in trenches galvanised steel water tubing of medium grade with all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as required at site of size 80 mm dia complete all as specified and directed. Note :- (i) Excavation and earth work shall be measured and paid seperately under relevant item of Sch A (ii) The rates quoted inclusive of cutting, jointing and testing of the pipe. |
| 22 | Supply & Laying in trenches galvanised steel water tubing of medium grade with all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as required at site of size 50 mm dia complete all as specified and directed. Note :- (i) Excavation and earth work shall be measured and paid seperately under relevant item of Sch A (ii) The rates quoted inclusive of cutting, jointing and testing of the pipe. |
| 23 | Supply & Laying in trenches galvanised steel water tubing of medium grade with all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as required at site of size 40 mm dia complete all as specified and directed. Note :- (i) Excavation and earth work shall be measured and paid seperately under relevant item of Sch A (ii) The rates quoted inclusive of cutting, jointing and testing of the pipe. |
| 24 | Supply & Fixing galvanised steel water tubing 25mm dia of medium grade with all fittings such as bends, elbows, tees, unions, nipples, short pieces etc and fixed to walls and ceilings or laid in floors complete all as directed.Note:- (i) The rates quoted inclusive of cutting, jointing and testing of the pipe. |
| 25 | Supply & Fixing galvanised steel water tubing 20mm dia of medium grade with all fittings such as bends, elbows, tees, unions, nipples, short pieces etc and fixed to walls and ceilings or laid in floors complete all as directed.Note:- (i) The rates quoted inclusive of cutting, jointing and testing of the pipe. |
| 26 | Taking up Cast iron water main (including all fittings) with spigot and socketed ends and lead joints including burning out lead joints for pipe of bore 80 mm complete all as specified & directed. |
| 27 | Taking up Cast iron water main (including all fittings) with spigot and socketed ends and lead joints including burning out lead joints for pipe of bore 300 mm complete all as specified & directed. |
| 28 | Supply laying, connecting, jointing and testing ductile iron pressure pipe ISI maked to IS-8329-2000 (Reaffirmed - 2005 Edition 4.1) of 80 mm dia, with spigot and socket ends, for water supply class K-9 with cement mortar lining inside the metallic zinc coating with finishing layer of bituminous paint on outside the pipe without polyethylene sleeves but including \\"Tyton Joint\\" supplied with ISI marked rubber or fiber board gasket conforming to IS-5382-1982 (Reaffimed-2003) with dual hardness of type-2 (bulb) and type-5 (Heel) quality laid in trenches complete all as specified and directed. Note:- Earth work and DI specified / fittings of the pipe shall be measured and paid separately under appropriate item. |
| 29 | Supply laying, connecting, jointing and testing ductile iron pressure pipe ISI maked to IS-8329-2000 (Reaffirmed - 2005 Edition 4.1) of 300 mm dia, with spigot and socket ends, for water supply class K-9 with cement mortar lining inside the metallic zinc coating with finishing layer of bituminous paint on outside the pipe without polyethylene sleeves but including \\"Tyton Joint\\" supplied with ISI marked rubber or fiber board gasket conforming to IS-5382-1982 (Reaffimed-2003) with dual hardness of type-2 (bulb) and type-5 (Heel) quality laid in trenches complete all as specified and directed. Note:- Earth work and DI specified / fittings of the pipe shall be measured and paid separately under appropriate item. |
| 30 | M&L boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of upto 200 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed. |
| 31 | Taking up Cast iron water main (including all fittings) with flanged ends including disconnecting pipes and fittings in any position complete including burning out lead joints for pipe of bore 150 mm complete all as specified & directed. |
| 32 | Supply, laying and testing DI pipes with double flanged ends centrifugally cast, class K-9 with cement mortor lining inside the pipes & Zinc coated out side as per IS 8329/2000 in any length fixed on pillar and wall of 150 mm bore sizes complete all as specified and directed. Total in Figures 23 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender