Tender For Repair/ Maintenance Of Sewage Network & Connected Works, Compound Wall/ Perimeter Wall, Foot Path, Approach Path, Damaged Barbed Wire, Concertina Coil, Chain Linch Fencing & Associated Works Atjamshedpur Area Under Ge Ranchi
Tender Value
33 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
20 days left
EMD
66000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Sewage Network & Connected Works, Compound Wall/ Perimeter Wall, Foot Path, Approach Path, Damaged Barbed Wire, Concertina Coil, Chain Linch Fencing & Associated Works Atjamshedpur Area Under Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (wood steel or RCC) any section, including taking out embedded portion (post embedded in concrete) and making good disturbed ground. |
| 2 | Excavation in post holes( or similar holes) each n exc 0.5cum each getting out, returning, filling in and ramming earth or broken rubble mixed with earh around , in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surfaces in soft/ loose soil. |
| 3 | M&L PCC in foundations, filling and mass-concrete type C2 (1:3:6) using 40 mm graded stone aggregate |
| 4 | S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including and all necessary drilling, bolting and riveting etc and similar work conforming to Fe-290 or Gde E-165 |
| 5 | S&F MS screw bolts (machine made) with hexagonal or square heads at one end and screwed with the other end each screwed end to be fitted with washers and one hexagonal or square nut n. exc 5 cm long of diameter of shanks 11 to 15 mm. |
| 6 | M&L MS round bars 10 mm dia and over cut to length, bent to shape required including cranking bending,painting and fixed with chain link fence conforming to Fe-410-0 complete all as directed at site. |
| 7 | Dismantling fencing wire mesh,any type |
| 8 | S&F for 3 mm Dia GI wire 100 x 100 mm mesh,(chain link fencing) made up into mattresses, or cages lapped wired and laid in position including closing and binded and tied with RCC posts properly complete all as directed at site. |
| 9 | S&F in repair of GI barbed wire 2 strands 3 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including sewing or tying with GI wire all as shown on drgs. (Each line wire to be measured) complete all as directed at site. |
| 10 | M&L for prepration of new steel surface not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide |
| 11 | M&L applying two coat of black japan paints over one coat of red oxide primer on steel surfaces n.exe 10cm in width or girth including preparation of surfaces complete all as specified. |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise privided for complete all as directed. |
| 13 | M & L Framed work as in doors or gates of angle or other sectionwith gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410- W (Gde- E-250) quality- B incl structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication |
| 14 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm in thickness (below or above ground level) all as specified. |
| 15 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in sub base floors and paving,foundation etc complete all as specified and directed. |
| 16 | M&L for sand filling under floors or in foundations including watering and consolidation all as directed. |
| 17 | M&L machine pressed precast concrete interlocking paver block with grey cement and pigment (rubber moulded coloured interlock tiles with glossy finish) of any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as directed. |
| 18 | M&L for pressed precast concrete interlocking paver blocks with grey cement and pigment (rubber moulded coloured interlock tiles with glossy finish) shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement with pigments. |
| 19 | Providing factory made precast cement concrete solid block type B1, 1:2:4 (20mm graded aggregate) as in kerb stone of any size/thickness setting in cement mortar 1:4 for path edgings etc, embedded in positon including all necessary excavation, tamping ground arround blocks and removal of rubbish/ surplus soil etc. complete all as directed. |
| 20 | M&L for 25 mm thick PCC(1:2:4) using 40mm graded stone aggregate finished cement concrete surface even and smooth without using extra cement complete. |
| 21 | M&L for rendering 20mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 22 | M&L factory made chequered cement concrete tiles, 25cm x 25cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & pigments. |
| 23 | M&L coloured heavy duty parking tiles/Dura tiles with grey cement and pigment 30cm x 30 cm thick set jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 24 | M&L for 40 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in floor or laid under floor etc complete all as specified and directed |
| 25 | M&L for 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10 mm wide, 30 mm deep joints at the rate of 3.00 mtr centre to centre and at every turning complete all as specified and directed by Engr-in-Charge. |
| 26 | Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc |
| 27 | M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6 |
| 28 | Description all as per above ser item No 27 but except bricks |
| 29 | M&L Brick work with sub class 'B' Brick straight or curved on plain to any radius in half brick thick wall built in cm 1:4 |
| 30 | Taking down cement plaster of any description on brick or stone walls/concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc. |
| 31 | M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished fair & even complete. |
| 32 | M&L for preparation of new plasterd wall surfaces and applying two coat of cement based paint of approved colour and shade |
| 33 | Material & Labour complete removal of existing treatment on walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces specified and directed |
| 34 | M&L for preparation of old decorated surfaces on walls and applying one coat of cement based paint of approved colour and shade |
| 35 | Description all as per above ser item No 34 but two coats of cement based paint |
| 36 | M & L for preparation of Old plastered surfaces of walls and applying two coats of white wash complete as spd & directed |
| 37 | M & L for preparation of old wooden surfaces of any description , not otherwise described ,over 10 CM width or girth and applying one coats of synthetic enamel paint . |
| 38 | M & L for preparation of old steel surfaces of any description not otherwise described over 10 CM width or girth and applying one coats of synthatic enamel paint. |
| 39 | M&L for 50 mm thick PCC (1:2:4) type B-0 using 40 mm graded stone aggregate as in floor or laid under floor etc complete all as specified and directed |
| 40 | M&L for cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in lean concrete for foundation in drain,manholes etc complete all as specified and directed. |
| 41 | Cutting into existing manholes for connecting new drains,making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section in )cement concrete(1:2:4) type B-1 smooth finished, and reforming benching as required for 150mm dia of pipe. |
| 42 | Dismantaling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses. |
| 43 | M&L for 10 mm thick cement plaster in CM (1:4) for backing of tiles complete all as specified and directed. |
| 44 | M&L for coloured glazed ceramic tiles in vertical surface 300x450x7to8mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces all as specified and directed. |
| 45 | M&L for 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified. |
| 46 | M&L non skid coloured ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18sqm infloor etc;set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed. |
| 47 | M&L non skid coloured ceramic tiles 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.18 sqm but n.exc 0.38 sqm in floor etc;set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete . |
| 48 | Taking up or down steel tubing and connection of 15 mm bore complete all as specified directed at site. |
| 49 | Description all as per above ser item No 48 but for 20 mm dia bore pipe. |
| 50 | Supplying and laying 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 51 | Supplying and laying 25mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 52 | 20mm CPVC Brass Elbow for 'hot or cold' water supply connection and similar works etc,. |
| 53 | 20mm CPVC Brass Tee for 'hot or cold' water supply connection and similar works etc,. |
| 54 | 25mm CPVC Brass Elbow for 'hot or cold' water supply connection and similar works etc,. |
| 55 | 25mm CPVC Brass Tee for 'hot or cold' water supply connection and similar works etc,. |
| 56 | Supply only integral water proofing compound (Make : Impermo, Water Seal, Acco proof) (WPC will be used as per manufacture instructions). |
| 57 | Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr deep for foundation in soft/loose soil & getting out. |
| 58 | Demolition and breaking up drain pipes SGSW/RCC pipe set in cement mortar of internal dia 100 mm completes all as directed at site. |
| 59 | Description all as per abover ser item No 58 but 150mm -ditto- |
| 60 | Description all as per abover ser item No 58 but 200mm -ditto- |
| 61 | M/L for PCC (1:3:6) type C-2 as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested for internal dia of pipe 100 mm complete all as specified and directed at site. |
| 62 | Description all as per abover ser item No 61 here-in-before but for 150mm dia of pipe complete. |
| 63 | Description all as per abover ser item No 61 but for 200mm dia of pipe complete. |
| 64 | M&L for 100 mm dia of reinforced concrete pipe ,class NP2 ,laid and jointed complete with collars as specified and directed. |
| 65 | Description all as per abover ser item No 64 but 150mm dia pipe –ditto- |
| 66 | Description all as per abover ser item No 64 but 200mm dia pipe –ditto- |
| 67 | Demoltion of RCC in any description and in any position complete all as specified and directed by Engr-in-Charge. |
| 68 | M&L for pre-cast RCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in cover slab etc set in CM (1:4) complete including necessary from work. |
| 69 | S&F 10mm dia and over TMT bars cut to length bend to shape as required including crancking ends and binding with MS wire (amealed) not less than 0.9 mm dia complete all as specified and directed. |
| 70 | S&F 6 mm to 8 mm dia TMT bar cut to length bent to shape required including cranking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete . |
| 71 | S&F 10 mm dia and over MS round bar cut to length bent to shape required for manhole cover handle or rungs or like all and over as directed at site. |
| 72 | Returning filling in trenches including spreading leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil. |
| 73 | Removing exavated soild n.exc 50 mtr and depositing where directed at a leve n. exc 1.5 mtr above the starting point. |
| 74 | M&L cleaning of sewage line, SWG/CI pipe or RCC pipe vertically/horizontally of dia 100 mm to 200 mm by rodding well flushing by using sufficient water and making it to clear for easy flow of sewage from manhole to manholes including desluding and make it the proper functional to entire satisfaction of Engineer-in-Charge and removing the sludge, silt etc to a distance n.exc 500 m and burying it in pits and covered with earth and spreading lime @ 1 Kg per Sqm of covered area complete all as specified and directed at site. |
| 75 | Dewatring /Desludging of septic tank/soak well /soak pit and Manhole by manually or mechanically and removing muddy soil sludge etc . The removal of sludge to a distance not exceeding 250 metre and burried in the same pit. |
| 76 | Cleaning/functioning of WC, bathroom, kitchen etc including gully traps floor/Nahni traps, CI pipes any description and in any positions ie below or above ground level, located in different situations and also on the surface of the wall etc complete in perfect functioning remvoing running / flowing conditions without obstruction by removing all blockages in system by suitable pumps and also including removing of all wastes, solid or liquid or of any description from the location of works under AOR of Jamshedpur Mil Stn complete all as specified and directed by Engineer-in-Charge. |
| 77 | S&F in repair vitreous china pedastal type watre closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor. |
| 78 | S&F in EWC sheet cover to match EWC complete. |
| 79 | S&F in repairs Health fauset (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook incl making connections and fixed in position complete in all respect as specified. |
| 80 | S&F in repair for 10ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed. |
| 81 | S&F in repairs stop valve/angle cock fancy type of 15 mm dia cast copper alloy chromium plated screwed down, high pressure, with crutch or butter fly handle long shank and cup (concealed type) screwed both ends for iron pipes or for unions. |
| 82 | S&F in repair 20mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 83 | S&F in repair, 15mm bore bib taps cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 84 | S&F for 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed. |
| 85 | S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement. |
| 86 | S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches/floors/walls complete all as specified and directed |
| 87 | Description all as per abover ser item No 86 above but 75mm bore |
| 88 | Supply and fixing in repairs PVC (SWR) junction single, (Single T) equal or unequal bore 75 mm provided with oval access door |
| 89 | Supply and fixing in repairs PVC (SWR) junction single, (Single T) equal or unequal bore 110 mm provided with access door |
| 90 | S&F PVC bends any radius 110 mm dia |
| 91 | Description all as per abover ser item No 90 but 75mm bore |
| 92 | M & L for preparation of new plastered surfaces of walls and applying two coat of White wash complete as specified & directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender