Tender For Improvement To Surfaces Of Certain Buildings And Infrastructure At Icgas, Provision Of Concrete Working Platfrom And Flame Proof Lighting At Battery Shop In Aed/Ald Hangar At Icgas And Provision Of Door For Screen Wall Along Parade Ground
Tender Value
27 Lakhs
Estimated cost
Bid Submission
31 Jul 2026
19 days left
EMD
54000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ratnagiri → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement To Surfaces Of Certain Buildings And Infrastructure At Icgas, Provision Of Concrete Working Platfrom And Flame Proof Lighting At Battery Shop In Aed/Ald Hangar At Icgas And Provision Of Door For Screen Wall Along Parade Ground At Icgs Ratnagiri.
BOQ
| Sl. No. | Item Description |
| 1 | Material and Labour for preparing old plastered, painted surfaces on walls including cornices of undecorated surfaces and applying one coat of white wash complete all as specified and as directed. |
| 2 | Material and Labour for preparing old painted steel and iron surfaces of any description, over 10cm width or girth when unconnected with other painting or when painted in different tint applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and as directed. |
| 3 | Material and Labour for preparation of old decorated distempered surfaces of walls by washing, rubbing down & stopping holes of distempered surfaces and apply two coats of oil emulsion distemper to walls complete all as specified and as directed. |
| 4 | Material and Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with and including complete removal of existing treatment and sealing the cracks complete all as specified and as directed.Note:- The work will have to be done up to Four storey building height, no extra payment be paid for scaffolding or any some kind of mechanically hydraulic machine. |
| 5 | Taking down cement plaster from walls built in cement mortar, etc. including raking out joints, hacking for key, scrubbing down with water, etc. to receive plaster complete all as specified and as directed. |
| 6 | Material and Labour for rendering 10 mm thick on surfaces of brick work or concrete in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed. |
| 7 | Material and Labour for rendering 15 mm thick on fair faces of laterite stone masonry wall surfaces in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and as directed. |
| 8 | Material and Labour for rendering 5 mm thick in ceilings in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and as directed. |
| 9 | Material and Labour for preparing new plastered surfaces on ceiling including cornices and applying three coats of white wash complete all as specified and as directed. |
| 10 | Material and Labour for preparing surfaces plastered or unplastered and apply two coats of oil emulsion distemper to walls complete all as specified and as directed. |
| 11 | Material and Labour for preparing surfaces plastered or unplastered of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including sealing the cracks all as specified and directed.Note:- The work will have to be done up to Four storey building height, no extra payment be paid for scaffolding or any some kind of mechanically hydraulic machine. |
| 12 | Supply and Fixing of Aluminium composite panel (ACP) AL 33D having 3-4mm thick sheet panel with 0.3mm aluminium coil thickness aluminium alloy AA3105 of approved texture and colour by Engineer-in-charge for exterior applications such as wall claddings, sign board fixed on MS/SS frame work by riveting/screwing or with bolts and nuts at 300mm centre to centre including filling the joints of each panel with silicone gel to match the colour of ACP panels for superior finish all along the periphery complete all as specified and as directed. |
| 13 | Supply and Fixing of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed. |
| 14 | Material and Labour for mild steel plates Fe 410 Grade E250 quality A in roof trusses (framed) trussed, etc connecting with bolts/welding as baseplates/connecting plates etc complete all as specified and as directed. |
| 15 | Material and Labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on surfaces of any description over 10cm in girth not otherwise described complete all as specified and as directed. |
| 16 | Supply and Fix anodised aluminium powder coating (minimum thickness of powder coating 50micron) frame for doors windows, ventilators and partition section with one or more rebates including joining cleats for fixing etc, complete all as specified and directed. |
| 17 | Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed. |
| 18 | Material and Labour for Machine cut Laterite stone masonry exceeding 10 cm in width square rubble, regular coursed, well bonded, bedded and solidity hearted, built in cement mortar 1:6 complete all as specified and directed. |
| 19 | Material and Labour for Form work to sides and soffits of floor or roof RCC beam sides of lintel beam flat rough finish surfaces to receive the plaster, complete all as specified and as directed. |
| 20 | Material and Labour use and waste of formwork to sides and soffit of chajja etc flat for rough finished surfaces of concrete complete all as specified and as directed. |
| 21 | Material and Labour for providing RCC 1:2:4 (using 20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 22 | Material and Labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 23 | Material and Labour for Mild steel TMT bars 6 mm to 8mm dia over bent to shape required, including cranking, bending & binding as in stirrups /rings complete all as specified and directed. |
| 24 | Material and Labour for machine cut Kota stone slab flooring 20 to 25 mm thick over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shades of the slab including rubbing and mirror polishing complete all as specified and as directed. |
| 25 | Material and Labour for granite of 20mm thick for any type of work (table rubbed and polished) in steps, jambs pillars, window cills cooking platforms and like over 20mm screed bed 1:4 in cement mortar including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 26 | Material and Labour Rounding to edges of stone slabs one edge, such as in steps cooking platform, and other similar situations etc directed. |
| 27 | Supply and Fix vitreous China wash basin, white coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe PVC 32mm bore and angle iron brackets of required size and length etc and making good disturbed surfaces to match with the existing complete all as specified and directed. |
| 28 | Supply and Fix of low-density polythene pipe of pressure rating 6 Kg per Sqcm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed. |
| 29 | Supply and Fix 600x450mm looking mirror of selected quality mounted on 6mm thick commercial plywood and PVC beading including fixed to wall with plug and screws etc, complete all as specified and as directed. |
| 30 | Supply and Fix Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 31 | Supply and Fix in repair Soap dish any type, fixed to plugs with chromium plated brass screws all as specified and directed. |
| 32 | Supply and Fix in repair tubular towel rail 20mm dia brass chromium plated 'D' type 60cm long with bracket and fixed complete all as specified and as directed. |
| 33 | Supply and Fix for elbow pillar tap, brass, 15mm dia, with capston heads, chromium plated, fancy type screwed down, high pressure, with or without lettered hot or cold, with long shank, screwed shanks and fly nuts, screwed for iron pipes or for wash hand basin all as specified and as directed. |
| 34 | Supply and Fix 15mm bore stop valve/ angle stop cock chromium plated, fancy type cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe with long shank and cup complete all as specified and as directed. |
| 35 | Supply and Fix 25mm bore stop valve/ angle stop cock chromium plated, fancy type cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe with long shank and cup complete all as specified and as directed. |
| 36 | Supply and Fix Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed. |
| 37 | Supply and Fix Grating doom 100mm dia of PTMT of minimum weight 25 gms complete all as specified and as directed. |
| 38 | Supply and Fix of 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed. |
| 39 | Supply and Fix of 25 mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed. |
| 40 | Supply and Fix Bottle trap of PTMT having bore of dia 40mm in discharge pipe minimum water seal of 25mm (minimum weight 40mm-270 gms) complete all as specified and as directed. |
| 41 | Supply and Fix for 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 42 | Supply and Fix for Providing Kitchen Cabinet anti-fungal, moisture resistance, anti-borer, 100% water Proof, flame retardant in required sizes at site made out of 100% Solid WPC Plain board of required size 18mm thick (WPC) Wood polymer composite sheet & provision of shutters made out of 18 mm thick 100% Solid WPC Plain board all required brackets SS screws etc. The panels shall be fabricated using adhesive and screws where ever required. as per drawing and specification including taking down and removal of old unserviceable boarding of any description and in any position, complete all as specified and as directed. |
| 43 | Supply and fixing (WPC) Wood polymer composite sheet (WPC) Wood polymer composite coated pre-laminated one side decorative & other side balancing lamination sheet density 600 Kg/m3, frame of width 150mm & 18mm thickness made out of extruded 18mm WPC sheet and joined with suitable Cement Solvent adhesive and screw. The frame shall be fixed to the wall using 75mm long mild steel screws through the frame by using (WPC) Wood polymer composite fasteners a minimum of 3 Nos, of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc, complete all as specified and directed. |
| 44 | Supply and Fixing of hydraulic hinges for kitchen cabin door shutter of mild steel bright finish or electrogalvanized, fixed with screw etc; complete all as specified and as directed. |
| 45 | Supply and Fixing of mild steel butt hinges 100mm long, medium weight cold rolled fixed with steel Chowkhats etc, complete all as specified and as directed. |
| 46 | Supply and Fixing of mild steel single action helical hinges 150-200mm long, suitable for 1000-1250mm wide wooden door fixed with steel Chowkhats etc; complete all as specified and directed |
| 47 | Supply and Fixing of aluminium anodised handles 100 mm long fixed to windows all as specified and directed. |
| 48 | Supply and Fixing in repair stainless steel sink, 1.00mm thick for kitchen, with plug, waste pipe, washers, including bedding in cement mortar on to dwarf walls, or including fixing 32 cantilever iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 49 | Supply and Fixing of 15 mm bore Brass chromium plated mixer for mixing hot & cold water screwed down for iron 33 pipe and fixed complete all as specified and directed. |
| 50 | Supply and Fixing of Stainless-Steel Safety Eye Washer Hand and Foot Operated, with a compact and efficient emergency response unit engineered for rapid eye irrigation. Crafted from high-quality stainless steel, corrosion and wear resistant, suitable for chemically exposed areas, delivers a gentle yet effective water flow to cleanse eyes of harmful substances, dual-mode activation-via hand push plate or foot pedal ensures hands-free operation in critical situations installed at a height of average eye sight including a hose of 1.2 meter complete all as specified and directed. |
| 51 | Material and Labour, for Acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, laid over 10mm thick black coat in cement mortar 1:4 and set and jointed in neat cement slurry and pointed in white or Coloured cement to match all as specified and directed. |
| 52 | Material and Labour for preparation of new plastered surface of ceiling and applying two coats of white wash, complete all as specified and as directed. |
| 53 | Material and Labour for old surface of walls one coat of acrylic antifungal paint on walls along with suitable pigment for colour including preparation of old surface including sealing the cracks, complete all as specified and directed. |
| 54 | Material and Labour for Point wiring with PVC insulated unsheathed FRLS-H stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire,to be drawn in and including, ERW Steel medium grade conduit not less than 25 mm dia. along with all accessories flexible metallic pipe, like Tee, Bend, Junction Box end Plug to surface on walls/roof/floors with clamping wiring shall be suitable for flame proof area as per STEC -7 complete for One light point controlled by one, one way switch complete all as specified and directed. |
| 55 | All as per same in item no 54 but for One exhaust fan point controlled by one switch and regulator complete. |
| 56 | All as per same in item No 54 above but for one socket outlet 15/16 Amps on independent board with 2 X 2.5 Sq mm cable (Phase & neutral) and 2.5 Sq mm earth wire (power point 15/16 Amps sockets) complete. |
| 57 | Supply and Fix flame proof, rotary switch of capacity 16 Amps, single pole, ON/OFF, in LM6, 250 volts epoxy painted as per IS 2206(Part-11)-1976 and IS 2148-2981, Material - dia cast aluminium alloy, Weather proof IP 66 as per IS/IEC 60529:2001,certified by CMRI approved and as per STEC No-7 complete all as specified and as directed. |
| 58 | Supply and Fix Flame Proof Switch socket and plug combined in LM6 cable termination box in LM 6, 16 Amps, 250 Volts, 2P+ earth epoxy painted as per IS 2206(Part-11)-1976 and IS 2148-2981, Material: dia cast aluminium alloy, Weather proof IP 66 as per IS/IEC 60529:2001,certified by CMRI approved and as per STEC No-7 complete all as specified and as directed. |
| 59 | Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed. |
| 60 | Supply and fixing of MCB DB made of sheet steel, powder painted with NUTRAL bus bar with suitable rating, neutral link, earth bar and Din rail ,240Volts SPN with 8-way Double door, IP-43-IK09 protection grade complete all as specified and as directed. |
| 61 | Supply and Fixing of MCB SPN 40 Amps, 240 Volts, 'C' series, breaking capacity 10 KA complete all as specified and directed. |
| 62 | Supply and Fixing of MCB SP 10 Amps, 240 Volts, 'C' series, breaking capacity 10 KA complete all as specified and directed. |
| 63 | Supply and Fixing of MCB SP 20 Amps, 240 Volts, 'C' series, breaking capacity 10 KA complete all as specified and directed. |
| 64 | Material and Labour of Sub main wiring power/circuit using PVC insulated unsheathed FRLSH, stranded copper conductor cable 2 Single core of size 10 Sqmm, earth continuity conductor of size 10 Sqmm to be drawn through in and including steel conduit suitable for flame proof wiring in walls/roof/floors.complete all as specified and directed. Note:3 wires of 10 sqmm and steel conduit shall be measured as one unit. |
| 65 | Supply and Fix Exhaust fan metallic flame proof 12 inch, 230 Volts, 1440 RPM, 1120 CFM, Weather proof IP65 as per IS/IEC 60529:2001, Epoxy powder coated shade, class F insulation including louvres, wire mesh complete all as specified and directed by Engineer in charge Note: Rate inclusive of proper cutting of existing wall & fixing exhaust fan and making the surface good complete. |
| 66 | Supply & fixing of prefabricated clay model, mould and casted door screen model both side (front and back) up to approximate size 5 metres wide and 6.5 high, executed in GFRC material in wooden finish of selected pattern, design, texture as approved by Engineer in Charge, including fabrication and installation mounting and fixing of hardware such as brackets, screws & fishers, bearing and all connected items for hassle free installation complete all as specified and as directed. Note:- (i)The design & drawing shall be prepared & submitted by the contractor for prior approval by Accepting officer before execution of work. (ii) If any minor electrical or civil fittings and fixtures disturbed their-in will be match and fixed as existing. |
| 67 | Material and Labour preparing Old plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/prepared surfaces. Note:- Primer and emulsion to be carried out through air less spray machine complete all as specified and directed. |
| 68 | Credit Amount shall be deducted to arrive the Contract Sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender