Tender For 84196/E8 Repairs To Certain Roads, Road Marking Paint, Road Furnitures At Domestic, Omq And Air Force Hospital Area Under Ge (Af) Jorhat
Tender Value
1.15 Crore
Estimated cost
Bid Submission
10 Aug 2026
28 days left
EMD
1.90 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jorhat → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 84196/E8 Repairs To Certain Roads, Road Marking Paint, Road Furnitures At Domestic, Omq And Air Force Hospital Area Under Ge (Af) Jorhat
BOQ
| Sl. No. | Item Description |
| 1 | M&L Repairs to Potholes of any depth, not exc. 1.00 SQM Each including Sweeping free from Dust, Mud or Water, Scoring Sunken Surfaces in Roads, Paths, etc., Cutting around Edges to at least 25mm in Depth, Making Good by Applying Tack Coat at 5.0 KG PER 10 SQM, Putting in Premixed Bituminous Macadam, Well Rammed and Sealed with Binder 9.8 KG PER 10 SQM, blended with 0.09 Cum of Stone Chippings, 6.3mm Size and again Well Rammed (including Supply of Premixed Macadam, Binder and Chippings), Depth of Potholes exc. 30mm, complete all as specified and as directed.NOTE : The Potholes are to be repaired in Independent Locations only. |
| 2 | M&L Repairs to Potholes of any depth, not exc. 1.00 SQM Each including Sweeping free from Dust, Mud or Water, Scoring Sunken Surfaces in Roads, Paths, etc., Cutting around Edges to at least 25mm in Depth, Making Good by Applying Tack Coat at 5.0 KG PER 10 SQM, Putting in Premix as specified for thin Bituminous carpet (2cm thick), Well Rammed and Sealed with premixed sand seal coat (6.8 kg of Binder with 0.06 CUM of sand), again well rammed (including supply of premix binder and sand), Depth of Potholes not exc. 30mm, complete all as specified and as directed.NOTE : The Potholes are to be repaired in Independent Locations only. |
| 3 | Scarifying or Picking Gravelled Macadam or Bituminous Macadam Surfaces in Area not exc. 400 Sqm and Depth exc. 50mm and not exc. 100mm, complete all as specified and as directed. |
| 4 | M&L Preparing Unsurfaced Water Bound Macadam (WBM) / Wet Mix Mecadam (WMM) by brushing with Wire Brushes for Removing Caked, Mud, etc., Sweeping with Brooms and finally fanning the cleaned surface with Air Compressor to Remove all Loose Dirt, etc.,complete all as specified and as directed. |
| 5 | M&L Applying Evenly a Prime Coat with Cationic Bitumen Emulsion SS1, conforming to IS:8887 at a rate of Application 7.0 - 10 KG Per 10 SQM on Surfaces of WMM/ WBM as specified in Table 500-3 of MoRTH Specification for Road and Bridge Works 2013, Using Mechanical Sprayer, complete all as specified and as directed. |
| 6 | M&L Premix Bituminous Macadam (Consolidated thickness 75mm or less) with Using Paving Bitumen of VG 30 Grade as Binder 4.0% by Weight of Total Mix, Laid, Rolled and Compacted to required Gradient and Camber, complete all as specified and as directed.NOTE : Premix Bituminous, Macadam shall be designed as specified in the Particular Specifications. Contractor shall Quote Unit Rate considering Bitumen Contents as specified here-in-above. In case of any variation in Binder Content on Minus side, the same shall be adjusted @ Rs. 65.00 Per KG of Binder/ Bitumen. However, no Price Adjustment in the Quoted Unit Rate shall be made on Plus side. Cost of Filler is deem to be include in the Quoted Unit Rate. |
| 7 | M&L Preparing existing Black Top Surfaces of Roads by brushing with Wire Brushes for Removing Caked, Mud, etc., Sweeping with Brooms and finally fanning the cleaned surface with Air Compressor to Remove all Loose Dirt, etc., complete all as specified and as directed. |
| 8 | M&L Applying evenly a tack coat of Bitumen VG-10 grade conforming to IS: 73 at a rate of application of 0.3-0.4 kg per sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as complete all as specified and |
| 9 | M&L Bituminous Premix Semi Dense Asphaltic Concrete (SDAC) 40mm Consolidated thickness with 5.5% Binder Content (Using Paving Bitumen VG 30) by Weight of Total Mix, Laid with Propelled Mechanical Paver, Rolled and Compacted to required Camber and Gradient using Power Roller exc. 8 Tonne and not exc. 12 Tonne Capacity, complete all as specified and as directed.NOTE : Semi Dense Asphaltic Concrete (SDAC) shall be designed as specified in the Particular Specifications. Contractor shall Quote Unit Rate considering Bitumen Contents as specified here-in-above. In case of any variation in Binder Content on Minus side, the same shall be adjusted @ Rs. 65.00 Per KG of Binder/ Bitumen. However, no Price Adjustment in the Quoted Unit Rate shall be made on Plus side. Cost of Filler is deem to be include in the Quoted Unit Rate. |
| 10 | M&L Preparing Bituminous Surfaces of Road and Marking 2.5mm thick Centre Lines, Stop Lines, Dashes, Arrows, etc. and the like not exc. 10 Cm Wide on Roads, Pavements with Hot Applied Thermo-plastic Road Marking Paint of Approved Colour, Confirming to BS:3262-1989 with Special Applicator Machine all as per Manufacturers Instructions, complete all as specified and as directed. |
| 11 | M&L Cat Eye Solar Reflective type of Metal Body Alloy of Size 100x100x20mm with PAMA Striplens Reflector of Model No. DA 972.0 fixed with and including MS Stud of suitable Size all as per Manufactures Instructions including taking up / out Old Unserviceable Cat Eye of any description, complete all as specified and as directed. |
| 12 | S&F Solar Cat Eye Aluminum alloy shall (100% Water Proofing design according to 65) of Size 125x125x25mm (Shank 65mm) of High Efficiency Mono Rystafie Solar Panel 2.4V/ 0.3 Watt One NI-ed Rechargeable Battery (1.2V/ 1600MA) consisting of Super Bright LED with 10,000 to 18,000 mcd completed as per Manufactures Instructions, etc. including taking out / up Old Unserviceable Cat Eye of any description, complete all as specified and as directed. |
| 13 | S&F Metal Tubular Dealineator made out of ABS Round body fitted with 2 No. 65mm dia Highly Reflective Reflectors made out of PMMA and mounted on 45/50mm dia Mild Steel Pipe of 600mm Height duly Powder Coated and Thermo Plastic Elastomer 3 Bands of Green, Red and Yellow Reflector Radium Tape of 25mm Wide Strips with Anti-theft Steel Net for Reflector Protection including Embedding in PCC 1:2:4 (20mm graded stone aggregates) of Size 150x150x300mm, grouted to Natural Ground with necessary Earth Works including taking out / up Old Unserviceable Dealineator of any description, complete all as specified and as directed. |
| 14 | M&L Applying Evenly a Tack Coat of Cationic Bitumen Emulsion (RS-1), Conforming to IS: 8887 at a Rate of Application of 2.0 - 3.0 KG Per 10 SQM on bituminous surface as specified in Table 500-5 of MoRTH Specification for Road and Bridge Works 2013, Using Mechanical Sprayer, complete all as specified and as directed. |
| 15 | M & L For 150mm thick (Spread thickness) Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled with 8 to 12 ton power roller and consolidated to required gradient and camber with crushed stone of grading 2 (63 to 90mm size) complete all as specified and as directed. |
| 16 | M & L For 7.5cm thick (compacted thickness) WBM, with Stone coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and as directed. |
| 17 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.all as specified and as directed. |
| 18 | DEDUCTION AGAINST SCHEDULE OF CREDITBidder(s) shall/ will Quote the EQUAL AMOUNT as per SCHEDULE OF CREDIT catered at SERIAL PAGE No. 17 in the Tender Documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 28 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 35 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender