Tender For annual repair maintenance Electrical Works At Fci Fsd Ramanathapuram For The Year 2026-27. Sh: Replcement Of Damaged Underground Cables And Submersible Pumpset Along With Allied Works
Tender Value
8.12 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
8 days left
EMD
16260
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramanathapuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair maintenance Electrical Works At Fci Fsd Ramanathapuram For The Year 2026-27. Sh: Replcement Of Damaged Underground Cables And Submersible Pumpset Along With Allied Works
BOQ
| Sl. No. | Item Description |
| 1 | Supplying of PVC insulated, PVC sheathed / XLPE aluminium conductor armoured under ground power cable of 1.1 KV grade conforming to IS 1554 part-I/7098(part-I) 1998 with up to date amendments of the following sizes.(a) 4 x 35 sq mm |
| 2 | Supplying of PVC insulated, PVC sheathed / XLPE aluminium conductor armoured under ground power cable of 1.1 KV grade conforming to IS 1554 part-I/7098(part-I) 1998 with up to date amendments of the following sizes.(b) 4 x 25 sq mm |
| 3 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required(a) 100 mm dia |
| 4 | Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole/wall for protection of under ground cable as required. |
| 5 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.(a) Up to 35 sq mm |
| 6 | Laying and fixing of one number of PVC insulated and PVC sheathed/ XLPE armoured U G power cable of 1.1 KV grade of following sizes on wall surface/truss (or in recess of wall/floor by cutting the surface and making good the same) as required.(a) Up to 35 sq.mm (clamped with 1mm thick saddle) |
| 7 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part Il complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.(a) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 8 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required(a) 4 x 35 sqmm (32 mm) |
| 9 | (b) 4 x 25 sq mm (28 mm) |
| 10 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(a) 5/6 A switch |
| 11 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(b) 3 pin 5/6 A socket outlet |
| 12 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required |
| 13 | Supplying and fixing following size PVC surface modular box with suitable modular plate and cover in front on wall surface along with providing connections with in the existing conduit and wiring as required.(a) 12 Module |
| 14 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.(a) 5/6 A switch |
| 15 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.(b) 3 pin 5/6 A socket outlet |
| 16 | Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.(a) 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 17 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.(a) 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire |
| 18 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) Single pole and neutral |
| 19 | (b) Triple pole and neutral |
| 20 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)(a) 8 way (4 + 24), Double door |
| 21 | Supplying and fixing 63 A rating, 415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) Triple pole and neutral |
| 22 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a) 100 A |
| 23 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 <120 lm/Watt)Supplying, installation, Testing & Commissioning of Streetlight LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).(a) 90 watt |
| 24 | LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000- 4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI ≥70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (a) 200 watt |
| 25 | (b) 70 Watt |
| 26 | Supplying, fixing, testing and commissioning of 1200 mm 20W LED T8 tube with extruded Al body, PC diffuser and inbuilt driver with efficacy of 100 lumens/W by replacing damaged spares of the existing fitting etc . as required (ISI certified) |
| 27 | Supplying, Installation, Erection Testing and commissioning of 5 HP, 50 Hz, 415V, 1500 RPM(or above) three phase bore well submersible pump (ISI certified) of suitable head range ( 80 - 250 metres) and discharge ( 90 - 15 Lpm ) with delivery dimensions of 38 mm made of oil sealed SS body including providing connections with sumbersible flat cable and pipes for functioning of motor as required at the site of work. (Note: The installation shall include hanging the motor along with existing PP Rope and Submersible cable required for functioning of motor in complete) |
| 28 | Supplying, Installation, Testing, Commissioning of 5 HP Three Phase DOL starter with suitable contactor and relay (SPPR) inside suitable SMC Box of dimensions 450 x 375 x 200 mm by fixing the SMC box on existing angle iron setup including making connections of incoming and out going cables etc as required. |
| 29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with foot valves, unions and other accessories with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External Worka) 40 mm(1.5 inch) nominal dia Pipes |
| 30 | Supplying, Installation, Erection Testing and commissioning of 2 HP, 50 Hz, 210V, 1500 RPM(or above) single phase open well submersible pump (ISI certified) of suitable head range and discharge with delivery dimensions of 50 mm including providing connections with sumbersible flat cable and pipes for functioning of motor as required at the site of work. (Note: The installation shall include hanging the motor along with existing PP Rope and Submersible cable required for functioning of motor in complete) |
| 31 | Supplying, Installation, Testing, Commissioning of 2 HP Single Phase DOL starter with suitable contactor and relay (SPPR) inside suitable SMC Box of dimensions 370 x 270 x 210 mm by fixing the SMC box on new angle iron setup (erected in concrete) including making connections of incoming and out going cables etc as required. |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with foot valves, unions and other accessories with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External Worka) 50 mm nominal dia Pipes |
| 33 | Supplying of 25mm dia twisted polypropylene rope(industrial grade) for hanging the motor pump inside the exisitng well as required. (ISI certified). |
| 34 | Supplying of 3 core flat 4 sqmm PVC insulated copper conductor cable (for submersible use) of 1.1 KV grade conforming to IS694:1990 with up to date amendments. |
| 35 | Supplying, installation, testing & commissioning of 40 W post top gate light landscape luminiare with IP 65 protection, glare-free and uniform light distribution with die cast housing and PC diffuser & spun aluminum reflector with lumen efficacy of >100 lm/W, colour temp 5700 K, THD < 10%, PF ≥ 0.95 with in built 10 kV surge arrestor on existing pole / gate post with suitable accesories including providing connections etc at site of required at the site of work. |
| 36 | Supplying and fixing hot press molded SMC box of following size on new suitable angle iron setup (erected in cement concrete) with suitable clamps and fitting arrangements including terminating the incoming and outgoing cables as required at the site of work.(a) 700 x 480 x 210 mm (inside) |
| 37 | Credit items to be taken out |
| 38 | (a) Dismantled submersible motor |
| 39 | (b) Dismantled DBs, Switch boards, GI pipes and clamps etc. |
| 40 | (c) Dismatled Street light fittings |
| 41 | (d) Dismantled open well motor |
| 42 | (e) Dismantled aluminium UG cables Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender